Kūno presas

Gannomat / Ganner Concept 70 Eco sofort verfügbar

Sąlyga: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; Iedpfjiidm Nsx Abkjik - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 1 020 mm, statybinis aukštis: 410 mm, kėlimo aukštis: 600 mm, tuščias svoris: 150 kg, keliamoji galia: 350 kg, bendras ilgis: 1 900 mm, bendras plotis: 740 mm, garantijos trukmė: 24 mėnesiai, NIVEAU – Lift Table HS 350 Large without worktop Description: > Mobile scissor lift table with double horizontal scissors, basic version without worktop; equipped with a base frame for the installation of various worktops; 4 swivel castors, 2 of which have brakes; wheel diameter 125 mm; operation via foot pump Load capacity (kg): 350 Iiodpfx Absh A Hxiokek Weight (kg): 150 Effective lift (mm): 610 Closed height (mm): 400 Max. height (mm): 1010 Platform size (mm): 1900 x 740

Sąlyga: geras (naudotas), Gamybos metai: 2014, Naudojama korpuso presas - GANNOMAT Concept 70 Eco - Pagaminimo metai: 2014 Isdjxhc T Tspfx Abksik - Bus galima įsigyti 2025 m. gruodį

Sąlyga: naudotas, Gamybos metai: 2020, Masterwood Project 351 L 3-Achs CNC-Bearbeitungszentrum Beschreibung: Luftgekühlte 3-Achs-Frässpindel 17,5 PS (HSK-63F) Statischer Frequenzumrichter für programmierbare Drehzahl 1.500–24.000 U/min Werkzeugwechsler mit 22 Positionen 6 pneumatische, absenkbare Werkstückanschläge zur Beladung/Positionierung schwerer Werkstücke Vorbereitet für die Montage von Spannvorrichtungen 2 horizontale Spannzangen für Balkenholz 6 Nullpunkte entlang der X-Achse (Positionierung der Werkstücke an der Rückseite der Auflagen) 8 Nullpunkte entlang der X-Achse (Positionierung der Werkstücke mittig auf den Auflagen) Komplette Referenzierung rechts entlang der Y-Achse Komplette Referenzierung links entlang der Y-Achse 2 Arbeitsfelder 1 x 100m³ Vakuumpumpe 24 Vakuumsauger Handbediengerät mit digitaler Anzeige Automatisches Werkzeugvermessungssystem Abförderband für Restmaterial Bohraggregat mit 19 Spindeln (32 mm Teilung), 2,2 kW: - 7 Vertikalbohrspindeln in X-Richtung - 6 Vertikalbohrspindeln in Y-Richtung - 4 Horizontalbohrspindeln in Y-Richtung - 2 Horizontalbohrspindeln in X-Richtung (Alle Bohrspindeln einzeln programmierbar) Steuereinheit mit PC SINCRO CAD/CAM MASTERWORK Software Technische Daten: Bearbeitungsbereich X-Achse: 5.130 mm Bearbeitungsbereich Y-Achse: 1.550 mm Verfahrgeschwindigkeit X/Y: 80 m/min Verfahrgeschwindigkeit Z: 25 m/min Max. Werkstückdicke: 200 mm Fräsmotorleistung: 17,5 PS (S1) Fräsmotordrehzahl: 1.500–24.000 U/min Bohraggregat: 3 PS Werkzeugaufnahmesystem: HSK63-F Iiedpfx Abovu U Itoksk Werkzeugwechsler: 22 Positionen Vakuumpumpe: 100m³ Absaugstutzen: 250 mm Luftfördermenge: 4.500 m³/h Luftgeschwindigkeit: 30 m/s Betriebsdruck: 7 bar Druckluftverbrauch: 300–500 l/min Sicherungswert: 40 A Maschinengewicht: 7.000 kg Alle Änderungen, Irrtümer und Zwischenverkauf vorbehalten! Keine Gewähr für die Richtigkeit der Angaben. Die besten Holzbearbeitungsmaschinen aus den Niederlanden.

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 00110033, Year of manufacture: 2000. X-axis travel: 3200 mm, Y-axis travel: 1250 mm, Z-axis travel: 150 mm. Milling spindle: 8 kW, 24,000 rpm, ISO 30. Drilling head: vertical drills on X-axis – 8 pcs; vertical drills on Y-axis – 3 pcs; double horizontal drills on X-axis – 2 pcs; double horizontal drills on Y-axis – 1 pc. Vacuum pump: 100 m³/h. Further details available in the attached documentation. Ijdov Hbzwjpfx Abkeik

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Italpresse SP 30-8 Case Clamp Iisdpfxjhwwnrs Abksk Year of manufacture: 1997 S/N: 978612997 Working length: approx. 3000 mm Working width: 600 mm Working height min-max: 450 – 1250 mm 12 supports 8 pneumatic pressure cylinders Dimensions (L x W x H): 3.5 m x 0.8 m x 2.24 m Weight: 1150 kg Technical information subject to change

Sąlyga: naudotas, Gamybos metai: 2024, New demonstration machine! List price: €32,665 complete in standard configuration with: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Top lamella pressure beam with 6 elements; side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly pressed carcass joints - Back pressure surfaces (side pressure wall and base) are continuous, coated support panels, 38 mm thick - Continuous pressing surface with a height of 95 mm at the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir - Pressing is performed electromotively via two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and controlled by a frequency converter, resulting in absolutely wear-free press force regulation - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing force for vertical pressure beam: min. 300 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing and adjustment speed of pressure beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second - Simple operation via 6 individual push buttons; 8 movement sequences selectable via the control system - Freely adjustable press time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Ijdpfx Abjuf Hx Hokoik - Weight: approx. 1800 kg - Net dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m - Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: - Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - 1 set of machine feet (working height 500 mm) Storage location:

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a carcass press for furniture assembly, RAMARCH PN31, year of manufacture 2002. Maximum material size: 2500 x 1300 x 600 mm Iiodpfx Aeh Iahcebkok Electro-pneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA) Very good condition. Available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, LAMELLA/CARCASS PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcass joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromotorically driven by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per pressing beam. - The pressing force of the beam is electronically regulated and set via frequency inverter, ensuring completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - Simple operation via 6 separate push buttons, 6 motion sequences selectable via control unit. - Freely adjustable pressing time preset with automatic opening function 0-30 min (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Iijdpfsw Tdymex Abkok - 1 selector switch for variable pressing force 1000 / 1500 / 2000 daN (kg) Machine no. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for 500 mm working height included Used machine: Year of manufacture 2013, completely overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - Immediately available -

Sąlyga: naudotas, Gamybos metai: 1999, bendras aukštis: 2 200 mm, bendras ilgis: 5 200 mm, bendras plotis: 800 mm, Tuščias svoris: 950 kg - Pagaminimo metai: 1999 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: 13301 - Presavimo pavara: Pneumatinė - Didžiausias ruošinio plotis [mm]: 4500 - Didžiausias ruošinio aukštis [mm]: 1550 - Didžiausias ruošinio gylis [mm]: 600 Isdpfx Abowyn Naskoik - Vertikalūs presavimo cilindrai [vnt.]: 3 - Horizontalūs presavimo cilindrai [vnt.]: 4 - Transportavimo matmenys: 5200mm x 800mm x 2200mm (i x p x a) - Transportavimo svoris [kg]: 950kg - Transportavimo pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas verslo subjektams Pristatymas ir senos įrangos išpirkimas galimas bet kada iš bet kurios pramonės srities Yorick Diebels