Kūno pirkti naudotą (199)

Sąlyga: naudotas, Gamybos metai: 1992, Matmenys: 5700 x 1300 x 2400 mm Sandėliavimo vieta: Nattheim Kedpfxsvvkl Do Af Iewt

Gamybos metai: 2025, Sąlyga: naujas, New Machine Year of manufacture: 2025 Features and technical data: Complete in standard configuration with: Ksdpfx Afsw Nafko Iswt - Robust, torsion-resistant steel frame, manufactured as a welded and bolted structure - Top lamellar pressure beam with 6 elements, side lamellar pressure beam with 5 elements - Lamellar pressure beams with field-proven tolerance compensation (Ganner system) for tightly clamped carcass joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing area with a height of 95 mm at the lower vertical pressure beam - Electromotive adjustment of the two pressure beams via precision trapezoidal threaded spindles (with enhanced lead and runout accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively, using 2 separate worm gear motors (2 x 0.75 kW each) - The pressure force of the beams can be steplessly adjusted electronically with 2 potentiometers and is regulated via frequency converters, ensuring completely wear-free pressure control - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/sec - Jog function for precise positioning of both pressure beams, e.g., for low pressing forces, drawers, and carcasses at 45° - Simple operation via 6 separate push buttons; 8 movement cycles can be selected via control panel - Freely adjustable press time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of the two pressure beams - Re-press function to increase or decrease pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Press speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be disabled for pressing special components. Including set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Sąlyga: labai geros būklės (naudotas), Yra 2 keičiami kėbulai, ilgis 6 m. Kwjdpfx Afsya Nf Ue Iet

Sąlyga: naudotas, Solid state relays, switchgear, switching components Kodofmldvopfx Af Iewt - Manufacturer: Gavazzi - Model: RAM1A69D100, 3 units mounted on heatsink - Price: complete set - Dimensions: 300/200/H80 mm - Weight: 3.3 kg

Sąlyga: naudotas, Solid State Relay, Switchgear, Switching Components -Type: G3PA-210B-VD -Input: 5 to 24 V DC -Output: 10 A at 24 to 240 V AC -Price: per unit -Quantity: 2 pcs available -Dimensions: 100/27/H100 mm -Weight: 0.2 kg Kodpfx Ajdngv Tef Ijwt

Sąlyga: naudotas, Solid-state relay, switchgear, switching components, solid-state contactor Kwedpfx Afoh Rkuws Iet - Manufacturer: Mosca, solid-state relay AND-gate - Model: ME 5499 AND-gate - Dimensions: 55 x 20 x H75 mm - Weight: 0.1 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, complete in standard configuration with: Kwjdpfx Afswx Nfgs Ijt - Robust, distortion-free steel frame in welded and bolted construction - PRESS BEAM LATERALLY with continuous pressure surface with 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, base) are continuous 25 mm thick, coated support plates - Electrically motorised adjustment of the press beam via precision trapezoidal lead screws (with enhanced pitch and concentricity accuracy) and high-performance travelling nuts with grease reservoir - Pressing is performed electrically via a worm gear motor (0.75 kW) - The pressing force of the press beam is infinitely variable and electronically set via potentiometer and regulated by frequency converter, providing absolutely wear-free pressure control - Press force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum of 2200 daN (kg) - Pressing and adjustment speed of press beams with fine positioning, selectable via 3-stage switch: 5 / 10 / 25 mm/second - Easiest operation via two separate push buttons, two movement sequences (open/close) selectable via control system - Freely adjustable pressing time preselection with automatic opening 0–30 min (switchable to seconds or hours) - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), 2011 Pollogen Maximus RF kūno formavimo įrenginys, geros darbinės būklės. Taip pat peržiūrėkite kitus mūsų skelbimus. Kwedpfx Ajxac Unef Iot

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 700 mm, bendras ilgis: 3 900 mm, bendras plotis: 900 mm, Parduodame įrenginį dėl naujos įsigijimo. Apžiūra galima iš anksto susitarus. Kodpfx Aoxqqpbsf Iewt

Sąlyga: naujas, Gamybos metai: 2026, Discover our extensive range of high-quality and cost-efficient ceramic abrasive media for processing workpieces made of steel, stainless steel, or other hard materials. Ceramic abrasive media are characterized by their exceptional durability. Ceramic abrasive media are particularly suitable for processing hard materials such as steel, but are also ideal for deburring aluminum components. Due to their higher weight, they exert greater pressure on the workpieces and provide excellent grinding performance. Compared to plastic abrasive media, they are significantly more durable and cost-efficient. When selecting the appropriate abrasive media, it is important to determine the optimal configuration regarding grinding performance, surface finish, geometry, and size. - Triangles & Angled-Triangles (D & DS): The edges make them ideal for deburring and for reaching a wide range of complex areas on workpieces. - Tridents (DZ): Designed to reach hard-to-access areas, such as grooves or gear wheels. - Cylinders & Angled Cylinders (Z & ZS): Their round shape makes them perfect for even surface treatment, for example in polishing processes. Also, the slim design of cylinders often allows easy separation. - Ellipses & Angled Ellipses (E & ES): Suitable for polishing and smoothing. Their edges also enable them to reach deeper areas of the workpiece. - Wings (W): Combine the advantages of triangles and tridents. Their "wings" reach complex areas, while their edges and compact design are optimal for deburring and applying strong pressure to the workpiece. If you are interested, we look forward to hearing from you. We will be happy to provide you with free and non-binding advice. Kwodpfx Aex A Elbof Iot The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first step, we provide you with a non-binding offer, in which we also inform you about our general terms and conditions, imprint, and cancellation policy before any purchase or contract conclusion takes place.

Sąlyga: naujas, Gamybos metai: 2026, Benefit from our range of plastic abrasive media for processing softer materials such as brass, copper, or aluminum. Plastic abrasive media offer a gentler and more careful finishing technique. Like ceramic abrasive media, plastic abrasive media are available in various abrasive grades, geometries, and sizes. Tailored to your workpieces, we will find the optimal abrasive media for your process. Overview of the different geometries and their properties: - Cones (K) have a high dead weight, providing excellent material removal rates. Their rounded form ensures gentle processing. - Pyramids (P) are ideal for deburring processes due to their sharp edges. Their pointed design allows the abrasive media to reach hard-to-access areas, such as holes. - Tridents (DZ) are particularly well-suited for processing complex components, such as gear parts or workpieces with grooves. - Paraboloids (PA): Similar to cones, paraboloids excel at smoothing and polishing thanks to their rounded shape, providing gentle and uniform finishing of workpieces. - Lenses (L), also due to their lower dead weight, are suitable for soft materials and offer gentle and even material removal. - The wedge (K) with its versatile geometry is an optimal abrasive media for deburring. Its pointed shape means it can reach even difficult-to-access slot areas. - Tetrahedrons (T) function similarly to pyramids and provide efficient deburring due to their edges. However, thanks to their sharper corners, they access more complex areas more effectively. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. Kodpfex A Eq Dex Af Ijwt The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offering serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). As a first step, we will send you a non-binding offer, which also includes our general terms and conditions with legal notice and the right of withdrawal, before any purchase/contract conclusion occurs.

Sąlyga: labai geros būklės (naudotas), Hess korpuso presas, tipas: Export, pneumatinis Gamintojas: Hess Tipas: Export Korpuso dydis: maks. 2.500 x 1.500 mm Spaudimo jėga: 1400 kp kiekvienam spaudimo agregatui prie 15 bar Kwodpfx Asxgvwpof Iet Vertikalių cilindrų kiekis: 2 + 2 spaudimo cilindrai Horizontalių cilindrų kiekis: 2 + 2 spaudimo cilindrai Matmenys: 3.900 mm x 2.500 mm x 600 mm Svoris: 1060 kg Hess korpuso presas Export, pneumatinis 2 vertikalūs spaudimo agregatai, po 2 spaudimo cilindrus kiekviename agregate, 80 mm cilindro diametras, 110 mm cilindro eiga, 1400 kp spaudimo galia kiekvienam agregatui prie 15 bar, 2 horizontalūs spaudimo agregatai, po 2 spaudimo cilindrus kiekviename agregate, 80 mm cilindro diametras, 110 mm cilindro eiga, 1400 kp spaudimo galia kiekvienam agregatui prie 15 bar, viršutinis labai lengvai perstumiamas dėl svorio paskirstymo, Presavimo procesas valdomas dviem rotaciniais vožtuvais: spausti – stop – atleisti, Priežiūros blokas: slėgio mažinimo vožtuvas 0–15 bar, manometras, rūko alyvintuvas, anoduoto aliuminio matavimo skalės, nuimamos kojos Vieta: kliento aikštelėje Iš karto prieinama

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, LAMELLA – CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration comprising: - Stable, torsion-resistant steel frame in welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcase joints Kwodpfxow Td A Ie Af Ist - Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick coated support plates - Continuous pressing surface with a height of 95 mm on the bottom vertical press beam - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance lead nuts with grease reservoirs - Pressing is carried out electromotorically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable via 2 potentiometers and controlled by frequency inverters, thus the pressing force regulation is absolutely wear-free - Pressing force for horizontal press beam min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for the vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Easiest operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Completely overhauled by Ganner, parts warranty 6 months Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Technical Data: Lamella carcass press from our showroom; Working range: width from 150 - 2,550 mm, height from 150 - 1,400 mm; depth from 150 - 700 mm; Variable pressing force adjustment of the side press beam: 300/700/1100/1400/1800/2200 dN(kg); Variable pressing force adjustment of the top press beam: 500/800/1200/1500/1900/2200 dN(kg); Ksdpeb Eln Djfx Af Iswt Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. The machine is available in our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2026, SURFACE CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lateral pressing beam featuring a continuous pressure surface with a 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick, coated support plates - Electromotive adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance slide nuts with grease reservoir - Pressing is electromotive via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely electronically adjustable by potentiometer and regulated via frequency converter, ensuring completely wear-free press force control - Pressing force for vertical pressing beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, controlled via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the pressing beam, e.g., for low pressing forces such as drawers, etc. - Simple operation via 2 separate push buttons, 2 movement sequences (Open/Close) selectable from the control panel - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams - Repress function to increase or decrease pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Minimum length: 150 mm, Maximum length: 1300 mm Minimum height: 150 mm, Maximum height: 1700 mm Depth: 700 mm Kedpfx Afsw Sgnkj Iewt Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short notice

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, LAMELLA/CARCASS PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcass joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromotorically driven by 2 separate worm gear motors (2 x 0.75 kW) Kwodpew Tdymsfx Af Ist - Pressing force: 2000 daN (kg) per pressing beam. - The pressing force of the beam is electronically regulated and set via frequency inverter, ensuring completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - Simple operation via 6 separate push buttons, 6 motion sequences selectable via control unit. - Freely adjustable pressing time preset with automatic opening function 0-30 min (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - 1 selector switch for variable pressing force 1000 / 1500 / 2000 daN (kg) Machine no. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for 500 mm working height included Used machine: Year of manufacture 2013, completely overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints Ksdeiidm Njpfx Af Iswt - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: geras (naudotas), Puslaidininkiniai relės, paskirstymo skydai, jungimo komponentai, puslaidininkinis kontaktorius, relės -Gamintojas: Crydom, puslaidininkinė relė -Tipas: ELS4850S -Kiekis: Yra 29 vnt. relių -Kaina: už vienetą -Matmenys: 100/50/H130 mm -Svoris: 0,5 kg/vnt. Kodpfxex Hfume Af Iswt

Sąlyga: naudotas, bendras ilgis: 40 mm, bendras plotis: 40 mm, bendras aukštis: 40 mm, Keraminiai šlifavimo kūnai, piramidės formos Spaleck 40mm 3 maišai, bendra masė 76,5 kg Šlifavimo kūnai, keraminiai šlifavimo kūnai, poliravimo kūnai vibracinėms šlifavimo linijoms, vibracinei „Trowal“ įrangai Būklė: naudotas, gera Kwsdpfx Aox Eczlef Iot

Sąlyga: naudotas, Trumpf TruDisk 4002 (6C) High-Performance Disk Solid-State Laser up to 4 kW The Trumpf TruDisk 4002 (6C) is a state-of-the-art, efficient, and robust disk laser designed for demanding industrial metal processing. System type: TruDisk 4002 (6C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further inspection was performed in-house. Operating hours could not be read. The laser operated flawlessly up until the end. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for various applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for outstanding quality), often in a range of 2–25 mm·mrad - Output options: Modular design – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular construction: Robust optical design, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (also hybrid or scanner-controlled), e.g., in bodywork or transmissions - Cutting / flame cutting of metals with high precision - Surface treatment, coating applications, etc. – professional industrial applications Power supply: Kwjdjwzabqopfx Af Iet - 380 V (-10 %) to 460 V (+10 %), 3AC + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP54 - Short-circuit resistance: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) We will be happy to answer any further questions by phone.

Sąlyga: naudotas, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser up to 4 kW Model: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. The combination of high output, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing no.: 20-10-02-A3* No further testing has been carried out onsite. Operating hours could not be retrieved. The laser was running flawlessly until decommissioning. Technical features: Performance & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies servicing/maintenance Ksdpfxowzahds Af Iowt Efficient energy & cooling systems: Energy saving modes, active power factor correction, pulse function for reduced consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (inlet temperature up to 38 °C) Reflection-resistant: special resonator design suitable for highly reflective metals Industry 4.0 capable: extensive sensor system & data interfaces for condition monitoring, OPC-UA, predictive maintenance Application possibilities: Scanner & hybrid welding (e.g. car body construction, shipbuilding) High-speed cutting, even of reflective metals Flame cutting & surface processing Cladding, hardening, deep penetration welding for high-precision requirements Technical data: Supply voltage: 380 V (–10%) to 460 V (+10%), 3-phase + PE Frequency: 50 – 60 Hz Power input: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection class: IP 54 Short circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, please do not hesitate to contact us by phone.

Sąlyga: naudotas, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metal processing. Model: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of Manufacture: March 2016 Drawing Number: 20-10-03-A204* No further in-house testing was performed. Operating hours could not be retrieved. The laser functioned perfectly up to the point of decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient modular architecture Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for excellent quality), typically in the range of 2–25 mm·mrad - Output options: Modular design – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical construction, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical Applications - Laser welding (including hybrid or scanner-guided), e.g., for car bodies or gearboxes - Metal cutting / flame cutting with high precision - Surface processing, coating application etc. – professional industrial use Kedpjwzaiujfx Af Iowt Power supply: - 380 V (-10 %) to 460 V (+10 %), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit resistance: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of delivery: (See image) (Specifications and details subject to change and error!) For any further questions, feel free to contact us by phone.

Sąlyga: naudotas, Length: 2,300 mm Width: 800 mm Height: 2,700 mm Workpiece size: max. 130 x 70 x 145 cm Kwsdpfst H Tuxsx Af Iet Pneumatic carcass press or gluing press for pressing furniture carcasses or similar items.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, LAMELLA - CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements Kodpexvitisfx Af Iowt - Lamella press beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counter-pressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Pressing is performed electromotively via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is steplessly electronically adjustable via 2 potentiometers and controlled by frequency converters, making the press force regulation completely wear-free - Pressing force for horizontal press beam min. 500 daN (kg), stepless up to max. 2200 daN (kg) Pressing force for vertical press beam min. 300 daN (kg), stepless up to max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second Extremely easy operation - Working height/loading height: 300 mm - Working dimensions: length min. 150 mm, max. 2500 mm; height min. 150 mm, max. 1400 mm; depth: 700 mm Machine no. 563.624 400V, 3-phase, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Fully overhauled by Ganner, parts warranty 6 months Location: from stock 54634 Bitburg - Immediately available -

Sąlyga: naudotas, spalva: balta, bendras svoris: 18 000 kg, tuščias svoris: 3 000 kg, krovinių skyriaus plotis: 2 480 mm, krovimo vietos ilgis: 7 330 mm, krovos erdvės aukštis: 2 460 mm, mašinos/transporto priemonės numeris: 1049,