Gildemeister Gm 20 pirkti naudotą (243)

Sąlyga: naujas, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 mm - Bar passage extension on request: 25 mm - Cross slides: 4 (positions 1-2-4-5) - Maximum feed length: 100 mm - Main spindle speed: 400 – 4000 rpm with threading, 400 – 5000 rpm without threading - Transfer time: 0.7 s - Cycle time: 1.4 – 60 s - Power: 11 kW ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT Consisting of AC motors (protection class IP 54), main and feed motors with a programmable PLC Siemens S7-1500 DOCUMENTATION: Isdpfeq Nzl Tex Abdstp CE Certification with manuals Electrical diagrams 1 hard copy + 1 USB copy with files in .pdf format CE Directives 2006/42/EC - 2014/30/EU - 2014/68/EU STANDARD

Sąlyga: geras (naudotas), Gamybos metai: 2008, Ref. No.: 10613 Manufacturer: GILDEMEISTER Model: GM 20 Year of manufacture: 2008 Control type: NC Control: Gildemeister Stock location: Halberstadt/Hamburg Country of origin: Germany Additional information: Machine type: GM 20-6 Number of spindles: 6 Number of side slides (cross slides): 6 (4) Number of tool spindles: 6 Max. bar diameter for round material: 20 mm (25 mm special) Max. across flats for hex material: 17 mm (21 mm special) Max. across flats for square material: 14 mm (17 mm special) Max. bar feed per working station: 100 mm (125 mm special) Max. bar feed over two working stations: 180 mm Max. bar feed per station with double-cycle machining: 100 mm (125 mm special) Max. stroke radial slides: 42 mm Adjustment of radial slides fore/aft: ±8 mm Max. stroke axial slides: 50 mm Adjustment of axial slides fore/aft: ±8 mm Max. stroke tool spindles: 86 mm Adjustment of tool spindles fore/aft: ±11 mm Max. stroke guide block: 50 mm Axial adjustment of guide block: 160 mm Max. thread (right-hand): 20×1.5 mm Max. thread (left-hand): 14×1.5 mm Main spindle speed: 450–5000 rpm Cycle time (min.–max.): 1.4–60 s Rapid rotation in seconds (idle time per cycle): 150° passive degrees Base machine rotation (standard without spindle stop): 0.7 s (0.5 or 0.9 s special) Base machine rotation with loading device: 0.7 s Rotation with spindle stop and bar loader: 0.7 s Number of tool positions: 12 Itsdpsxxpdmsfx Abdep Coolant tank capacity: 600 liters Nominal power spindle drive motor: 11 kW Spindle motor speed: 750–3500 rpm Dimensions (L×W×H) without bar guide: 3700×1500×1890 mm Dimensions (L×W×H) with bar guide: 5800×1500×1890 mm Net weight of machine without bar guide: 5,260 kg Gross weight of machine without bar guide: 5,860 kg Net weight of machine with bar guide: 5,700 kg Gross weight of machine with bar guide: 6,300 kg Machines can be inspected under power.

Sąlyga: naujas, Gamybos metai: 2024, The Gildemeister 20ACN allows, via the SIEMENS operator panel, for easy setting and modification of spindle speed, cycle time, and threading speed. It is capable of machining parts up to 25 mm in size with the same ease and precision. It offers the possibility to fit CNC turrets. Position 6 consists of: CNC part-off slide and CNC pick-off slide, variable-speed CNC pick-off spindle, with synchronization and stop functions. The CNC pick-off spindle, with specific programming, can be used as a C-axis. Technical data: • Max. round bar diameter: 20 / 25 mm • Max. square bar diameter: 17 mm • Bar pusher: 100 / 125 mm • Travel of front spindles: 86 mm • Longitudinal guide block travel: 50 mm • Radial slide travel: 42 / CNC 50 mm • Axial slide travel: 50 / CNC 56 mm • CNC cutting stroke: 42 mm • CNC pick-off slide travel: 42 mm • CNC pick-off spindle travel: 100 mm • Continuous spindle speed: 420 – 5,000 rpm • Rapid traverse times: 0.5 – 0.7 s • Main drive power: 11 kW / CNC 15 kW • Footprint without bar guide: 4,000 x 1,900 mm • Net weight: 5,500 kg The Gildemeister 20AC, on the other hand, is a multi-spindle lathe designed for highly specialized industrial sectors, where precision and accuracy are essential. Itedpfxjuqh Ihs Abdep

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Max. workpiece diameter: 25 mm, max. workpiece length: 100 mm, max. bar diameter: 25 mm, max. X/Z axis travel: 42 mm / 50 mm, rapid traverse: 40 m/min, number of spindles: 6, spindle speed: 12,000 rpm, control system: Siemens 840D Powerline. Itsdpfxstqfq Uo Abdep

Sąlyga: naudotas, Gamybos metai: 2004, veikimo valandos: 11 022 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07520000211, tekėjimo ilgis: 1 070 mm, sukimosi skersmuo virš skersinio stumduko: 400 mm, tekėjimo skersmuo: 560 mm, ašies variklio galia: 37 W, veleno greitis (maks.): 4 000 aps./min, veleno skylė: 79 mm, X ašies eiga: 485 mm, Y ašies eiga: 160 mm, sukimosi greitis (maks.): 12 000 aps./min, Įranga: sūkių greitis be galo kintamas, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a coolant treatment system as well as a comprehensive selection of HSK 63-A tools—approx. 40 tools. Furthermore, a Berg chuck is also included, see photos. The machine is being sold due to a lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Itodpfx Aeug Uc Nobdsp

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 6 - Max. bar diameter: 20 [mm], 25 [mm] optional - Number of cross slides: 4 - Max. feed length: 100 [mm] - Spindle speed: 420 - 5000 [rpm] - Indexing time: 0.7 [sec] - Machining time: 1.4-60 [sec] - Power: 11 [kW] - Dimensions: 5800 x 1500 [mm] Itodsuharrjpfx Abdsp - Weight: 6000 [kg] EQUIPMENT - 4 cross slides, positions 1 2 4 5 - 1 chip conveyor - 5 drills - 1 bar loader magazine IEMCA PRA41/31/P

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, veikimo valandos: 29 200 h, Zusatz-Ausstattung Mechanische und elektrische Vorbereitung für Feuerlöschanlage Kühlsystem mit 600l Fassungsvermögen und 50µm Filter Pumpe mit wählbarem Druck von 8 oder 20 bar Iedpfx Aoxwfmuebdotp IEMCA Boss 332E Stangenlader für Stangenlängen bis 3 m Bristol B270/E Ölnebelabscheider Beweglicher Spindelstock (80 mm) mit Werkzeugen auf Schlitten sowie Werkzeugbruchüberwachung Diese Gildemeister Sprint 20-8 wurde im Jahr 2010 gefertigt. Sie verfügt über ein Kühlsystem mit 600l Fassungsvermögen und 50µm Filter sowie eine Hochdruckpumpe mit wahlweise 8 oder 20 bar. Die Maschine ist mit einem Bristol B270/E Ölnebelabscheider und einem IEMCA Boss 332E Stangenlader für 3m-Stangen ausgestattet. Mit einer Spänenaustragshöhe von 1.250 mm ist sie auf einen effizienten Betrieb ausgelegt. Kontaktieren Sie uns gerne für weitere Informationen zu dieser Maschine. Einsatzgebiete: Drehen

Sąlyga: naudotas, Gamybos metai: 2013, Maximum turning diameter: 20 mm Maximum turning length: 80 mm Control: Fanuc 310is Main spindle: - Max. usable bar diameter: 20 (25) mm - Inner draw tube diameter: 28.5 mm - Max. spindle speed: 10,000 rpm - Drive power (main spindle): 3.7 kW - Max. torque: 9.4 Nm - C-axis C1: 360° Counter spindle: - Inner draw tube diameter: 28.5 mm Iodpfx Astqmnnebdstp - Max. spindle speed: 10,000 rpm - Drive power (main spindle): 3.7 kW - Max. torque: 9.4 Nm - C-axis C2: 360° Travel distances: - X-axis 1: 50 mm / 2: 240 mm - Y-axis 1: 350 mm / 2: 120 mm - Z-axis 1: 80 mm / 2: 300 mm Tool carrier - Slide 1: - Number of tool positions: 17 pos. - Internal machining: 6 pos. - External machining: 6 pos. - Driven stations: 5 pos. - Shank diameter: 20 mm - Shank cross-section: 12 x 12 mm - Collet diameter ESX / ER 16 - Speed (driven tools): 3x 3,450 / 2x 6,000 rpm - Drive power (driven tool stations): 5x 0.98 kW - Max. torque: 3x 4 / 2x 2.3 Nm Tool carrier - Slide 2: - Number of tool positions: 13 pos. - Internal machining: 4 pos. - External machining: 4 pos. - Driven stations: 5 pos. - Shank diameter: 20 mm - Shank cross-section: 12 x 12 mm - Collet diameter ESX / ER 16 - Speed (driven tools): 3x 3,450 / 2x 6,000 rpm - Drive power (driven tool stations): 5x 0.98 kW - Max. torque: 3x 4 / 2x 2.3 Nm Feed rates: - Rapid traverse (X / Y / Z): max. 40 m/min - Feed force: max. 2.5 kN - Acceleration: max. 5 m/s² Total power requirement: 56 kVA Machine weight: approx. 4.8 t Space required: approx. 8.0 x 2.5 x 2.0 m CNC short-turning lathe GILDEMEISTER - Sprint 20-8 - 8 axes (2x X / 2x Y / 2x Z / 2x C) - Main and counter spindle - FMB Turbo 3-36/3200A bar loading magazine - DELTATHERM coolant system

Sąlyga: geras (naudotas), Gamybos metai: 2004, Velenų skaičius: 8 Maks. strypo padavimas vienoje stotyje: 130 mm Iodpfx Absw Rfcdedjtp Maks. strypo padavimas dviejose stotyse: 260 mm Maks. radialinio slankiklio eiga: 52 mm Radialinio slankiklio reguliavimas: ±12 mm Maks. ašinio slankiklio eiga: 72 mm Maks. įrankių velenų eiga: 106 mm Įrankių velenų reguliavimas: ±10 mm Pagrindinių velenų greitis: 500 - 4 000 aps./min. Vieno gaminio apdorojimo laikas: 2 - 80 s Įrankių pozicijų skaičius: 18 Svoris: 12 600 kg

Sąlyga: geras (naudotas), Gamybos metai: 2007, veikimo valandos: 27 896 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2101-0171, tekėjimo skersmuo: 20 mm, sukimosi greitis (maks.): 10 000 aps./min, sukimo momentas: 14 Nm, TECHNICAL DATA Max. turning diameter: 20 mm Toolholder diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis specifications Linear axis Z1 / X1 / Z1 – Travel: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Rapid traverse (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Rated force: 1,250 N Linear axis Z2 / X2 – Travel: 180 / 230 mm Linear axis Z2 / X2 – Rapid traverse (max.): 40 m/min Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Rated force: 1,250 N Toolholder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 Ijdpfx Asw Em Dmsbdetp MACHINE DETAILS CNC control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on hours: 85,620 h Program run time: 27,896 h EQUIPMENT - CNC: Fanuc 16iT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Centralized lubrication - Handheld control device - Documentation available

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 6 - Number of counter spindles: 1 - Hirth tooth coupling - Cross slides, at positions: 1, 2, 4, 5 - Max. cross slide stroke: 28 mm - Max. compound slide stroke: 45 mm - Max. front spindle stroke: 165 mm - Max. bar feed stroke: 80 mm - Indexing time: 0.4 sec - Machining time: 0.9–50 sec * Max. bar diameter: 16 mm * Spindle speed: 600–9,000 rpm COUNTER SPINDLE - Single-acting hydraulic counter spindle - Counter spindle position: 6 * Max. bar diameter: 16 mm * Spindle speed: 600–9,000 rpm * Spindle drive power: 11 kW ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 4,400 × 1,100 mm - Machine weight: 4,800 kg ACCESSORIES - Double mechanical slide for cutting and reverse operation, at position: 6 - Rotating front spindles at positions: 1, 2, 3, 4, 5 - Part removal unit - Parts conveyor belt - Bar catcher chute - Chip conveyor - Coolant tank - Bar magazine: Iemca PRA40/42P - Bar support and its base - Bar support housing - Oil mist extractor: AR Filtrazioni Itsdpou Haapofx Abdjp - Number of cross tool holders: 6

Sąlyga: nepatikrintas (naudotas), Gildijos meistras GLD 20 Iodpfovu Tn Eex Abdetp

Sąlyga: naujas, Lathe fully overhauled both electrically and mechanically, repainted as new. Replacement of the electrical cabinet with Siemens Series 1500 PLC Pendant control panel Replacement of cables and micro-switches Overhauled main motor Replacement of the loss lubrication oil pump Replacement of tool coolant pump Door interlock system checked with electromechanical safety Pneumatic unit Loader interface Bar end position 1 Replacement of all bearings Itodpfod Hza Iox Abdjp Overhauled slides Camshafts replaced Replacement of all lubrication distributors Replacement of working and threading clutches Pneumatic loading chuck Fixed and rotating front spindles Variant with 20 mm diameter CE certification with attached documents

Sąlyga: naujas, Gamybos metai: 2025, Gildemeister 20 completely rebuilt as new - AC motor for production time control - AC motor for threading Iedpjfzk S Djfx Abdstp - GM-type soundproof enclosures - Frequency inverter for spindle speed programming - Bar passage: 20 mm, 25 mm, 28 mm with integrated bar loader - Optional: CNC cross slides on X and Z axes, CNC pick-up with CNC secondary operation slide - CE marking

Sąlyga: geras (naudotas), Gamybos metai: 1998, Daugiaašė tekinimo staklės su 6 ašimis Įranga: - Sriegimui Iodpfx Asw Navpsbdetp - Daugiaašei kalimui - Drožimui, pjovimui, frezavimui Gaminio paėmimo įrenginys Daug priedų (kreivės, vežimėliai, tvirtinimo žnyplės, ...) IEMCA strypų padavėjas SIR 32/33 F maks. strypo ilgis 3 300 mm

Sąlyga: naudotas, Multispindle automatic lathe GILDEMEISTER GM 16 AC Itodpfx Abewvvrbjdsp

Sąlyga: naujas, Gamybos metai: 2024, Gildemeister 42ACF: this is an automatic multi-spindle lathe designed to meet the demands of high-efficiency production. This model stands out for its versatility, being capable of machining parts up to 42 mm in diameter with the same ease and precision. Iodpfxorpniqo Abdotp The 42ACF lathe offers a range of features that make it particularly user-friendly. These include intuitive programming via a SIEMENS operator panel, which allows easy setting and adjustment of spindle speed, cycle time, and threading speed. Technical specifications: ● Number of spindles: 6 ● Maximum bar diameter: 42 [mm] ● Hexagonal key size: 36 [mm] ● Cross slides: 4 (positions 1-2-4-5) ● Maximum feed length: 130 [mm] ● Main spindle speed: 400 - 4000 [rpm] without threading ● Indexing time: 1-1.5 [s] ● Cycle time: 2 – 90 [s] ● Power: 22 [kW] The Gildemeister 42ACF, moreover, is a multi-spindle lathe aimed at highly specialized industrial sectors, where precision and accuracy are indispensable.

Sąlyga: geras (naudotas), Gamybos metai: 1995, Daugiaašė tekinimo staklės su 6 ašimis Įranga: - Sriegimui - Daugiaašei kalimui - Drožimui, pjovimui, frezavimui Gaminio paėmimo įrenginys Daug priedų (kreivės, vežimėliai, tvirtinimo žnyplės, ...) IEMCA strypų padavėjas SIR 32/33 F Itedpfxow Naulj Abdjp maks. strypo ilgis 3 300 mm

Sąlyga: naudotas, Multi-spindle automatic lathe GILDEMEISTER GM 16 AC Iedpfx Abjwvvrhedotp

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 6 - Number of counter spindles: 1 - Max. stroke of front spindles: 120 [mm] - Max. bar feed length: 130 [mm] SPINDLES * Max. bar diameter: 35 [mm] * Spindle speed: 218–4000 [rpm] COUNTER SPINDLE - Single-acting hydraulic counter spindle - Counter spindle position: 6 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Required space: 5950 x 1680 x 1980 [mm] - Machine weight: 10,500 [kg] ACCESSORIES - Standard slide rest, at position: 6 - Hydraulic cylinder for backward motion, at position: 6 Iodpfou Habgox Abdotp - Fixed front spindles, at positions: 1,2,3,4,5 - Device for thread milling and polygon turning - Cam device - Rear finishing cutter: sliding - Parts removal - Chip conveyor - Coolant tank - Bar magazine: Pietro Cucchi - Oil mist extraction: Donaldson

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 6 - Number of counter spindles: 1 - Max. stroke of front spindles: 120 [mm] - Max. bar feed: 130 [mm] SPINDLES * Max. bar diameter: 35 [mm] * Spindle speed: 218–4000 [rpm] COUNTER SPINDLE - Single-acting hydraulic counter spindle - Counter spindle position: 6 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Required space: 5950 x 1680 x 1980 [mm] - Machine weight: 10,500 [kg] - Operating hours: 10,946 [h] Itsdpfx Asu Habmobdop ACCESSORIES - Standard cut-off slide, at position: 6 - Hydraulic cylinder for reverse operation, at position: 6 - Fixed front spindles, at positions: 1,2,3,4,5 - Thread milling and polygon cutting device - Parts extraction - Parts conveyor belt - Chip conveyor - Coolant tank - Bar feeder: Iemca PRA 40/42F - Bar support and base - Bar support housing - Oil mist extractor: Donaldson

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys Sukimosi skersmuo: 600 mm Sukimosi ilgis: 2000 mm Valdymas: Siemens 840 D powerline Itedpfx Aexx R D Iobdep Pagrindinio veleno apsisukimai: 2500 aps./min. Bendras galios poreikis: 72 kVA Staklių svoris apie: 12 t Papildoma informacija 2 ašių CNC universalus tekinimo staklės Įranga: CNC valdymas Siemens Sinumerik 840 D powerline Centro atrama 12 pozicijų revolveris Luneta, gamintojas SMW AUTOBLOK Gniaužtas SMW Autoblok KNCS-N-400-128 Drožlių transporteris Alyvos rūko ištraukimo sistema, gamintojas IFS

Sąlyga: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, CNC Lathe GILDEMEISTER DMG MSL 60/7 – Year of Manufacture 2010 Equipped with SIEMENS 840D Powerline Control & Comprehensive Automation Package The GILDEMEISTER DMG MSL 60/7 offered here is a precise, robust, and reliable CNC lathe designed for industrial applications in both series and single-part production. With high-quality components, a powerful main and sub spindle, and advanced CNC control, this machine is perfectly suited for demanding machining processes in the metalworking and supplier industries. Featuring an integrated bar feeder, C-axis, coolant system, and chip conveyor, this machine package delivers high productivity with fully automated machining. Technical Details Spindle bore: 65 mm Bar capacity: 60 mm Max. main spindle speed: 5,000 rpm Sub spindle: available, 5,000 rpm C-axis: available, for milling and indexing operations Machine weight approx. 3,500 kg Equipment & Accessories ✔ IEMCA Bar Magazine Master 880/33 HF – For bar lengths up to max. 3,200 mm – Ideal for automated 24/7 series production ✔ KSS Coolant Supply System / Cooling Unit – Ensures optimal cooling and extended tool life ✔ Hinged Belt Chip Conveyor – Efficient removal of metal chips, perfectly suited for automated production Ijdpfx Aoxxi Niobdetp ⸻ Key Features & Advantages • Precise CNC machining with SIEMENS top-level control • Flexible production options thanks to sub spindle & C-axis • Ideal for complex, rotationally-symmetrical, and demanding components • High process reliability and minimal setup times • Suitable for high-performance and series production • Compact design with minimal footprint ⸻ Fields of Application • Mechanical engineering • Automotive & supplier industry • Medical technology • Hydraulic/pneumatic manufacturing • Contract manufacturing • Precision turned parts

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), Valdymo blokas Prekės ženklas: HEIDENHAIN Modelis: CTX 420 Itedpfexu Ryhsx Abdop Pagrindinė pavara Ašių skaičius: 3 Papildoma įranga Drožlių transporteris Alyvos garų separatorius su mechaniniu pramoniniu filtru, 1500 m³/h Paketinio strypų apdirbimo įranga G Signalinė lemputė, 4 spalvų Perforuota spaudimo įranga, Ø 68 mm Įtrauktas kėlimo sijonas Šis Gildemeister CTX 420 linear pagamintas 2008 m. Tai patikimas horizontalus tekinimo staklės su HEIDENHAIN Plus iT CNC valdikliu, įrankio pavara, C ašimi, Y ašimi ir drožlių transporteriu. Įrengta luneta ir įrankių matavimo prietaisas. Šiemet visiškai atnaujintas įrankių revolveris. Nepraleiskite progos įsigyti šias Gildemeister CTX 420 linear horizontalias tekinimo stakles. Kreipkitės dėl daugiau informacijos apie šį įrenginį. Pritaikymo sritys Tekinimas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 50 305 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 02260008351, tekėjimo ilgis: 600 mm, tekėjimo skersmuo: 324 mm, veleno skylė: 72 mm, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 185 mm, Y ašies eiga: 40 mm, Z ašies eigos atstumas: 620 mm, greitas poslinkis X ašimi: 4 m/min, greitas poslinkis Y ašis: 7 m/min, greitasis eiga Z ašyje: 7 m/min, bendras aukštis: 2 080 mm, bendras ilgis: 4 890 mm, bendras plotis: 2 460 mm, bendras svoris: 6 500 kg, strypo praėjimas: 45 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: iTNC 530, priešpriešinio veleno didžiausias greitis: 7 000 aps./min, priešveleno anga: 57 mm, įrankių magazino lizdų skaičius: 12, Įranga: dokumentacija / vadovas, - Driven tools: 12 - Tool holder: VDI 40 - Power of driven tools: 12 kW - Torque: 10.5 Nm - Speed: 4,500 rpm - Incl. tool package - Incl. belt filter system Isdpfxjwun Nvs Abdetp - Incl. MKE HL 12 PN bar feeder, year of manufacture 2008