BYLOJE PAKABA

Gannomat Concept Easy

Būklė: naujas, Gamybos metai: 2026, SURFACE CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction Fedpfx Answ Sgnks Hjpn - Lateral pressing beam featuring a continuous pressure surface with a 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick, coated support plates - Electromotive adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance slide nuts with grease reservoir - Pressing is electromotive via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely electronically adjustable by potentiometer and regulated via frequency converter, ensuring completely wear-free press force control - Pressing force for vertical pressing beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, controlled via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the pressing beam, e.g., for low pressing forces such as drawers, etc. - Simple operation via 2 separate push buttons, 2 movement sequences (Open/Close) selectable from the control panel - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams - Repress function to increase or decrease pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Minimum length: 150 mm, Maximum length: 1300 mm Minimum height: 150 mm, Maximum height: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short notice

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates Fpedpfxeiidm Nj An Hon - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Typ: SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: frequenzgeregelt Fpedjdmi Nijpfx An Hjn Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querwalzenmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubmotor: 2,2 kW Hubmotor (oben/unten): 0,37 kW × 4 Schenkelschwenkmotor: 0,37 kW × 2 Arbeitstisch-Hub: 0,55 kW Transportabmessungen (L×B×H): 3650×1850×2100 mm Gewicht: 4200 kg

Gamybos metai: 2009, būklė: geras (naudotas), • Fully automatic • Max. package height (mm): 650 • Min. package height (mm): 15 • Max. package width (mm): 1250 • Min. package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed table Fodpfx Aspu Anmen Hopn • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Spindle tiltable: Yes, 0 to 45° Fpodpouzkxxjfx An Hjn Height adjustment: Handwheel / electric Tilting adjustment: Handwheel / electric Fence adjustment: manual Height display: Digital display Tilt angle display: Digital display Fence position display: mechanical counter Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 900 mm, bendras plotis: 1 350 mm, bendras ilgis: 1 710 mm, sukimosi greitis (min.): 1 000 aps./min, galia: 5,5 kW (7,48 AG), SPYRA drožlių centrifuga 600H - Skirta šlapių drožlių su alyva arba emulsija nuvarvinimui - Pilnai veikianti - Pageidaujant – su garantija! - Svetimi daiktai drožlėse šiai mašinai nesudaro problemų, ji specialiai taip suprojektuota ir patentuota. Išeigos našumas (susmulkintoms drožlėms): - Plienas: 4 t/val. - Aliuminis: 0,8 t/val. - Žalvaris: 2,7 t/val. - Pilkoji ketus: 2,7 t/val. Mašiną galima apžiūrėti 71384 Weinstadt, šalia Štutgarto. SPYRA drožlių centrifuga / pramoninė centrifuga 600H - Pilnai paruošta darbui Fsdow Nqu Aspfx An Hjpn - Svetimi daiktai metalinėse drožlėse šiai įrangai nesudaro problemų; ji specialiai tam suprojektuota ir patentuota. Našumas susmulkintoms drožlėms: - Plienas: 4 t/val. - Aliuminis: 0,8 t/val. - Žalvaris: 2,7 t/val. - Pilkoji ketus: 2,7 t/val. Mašiną galima apžiūrėti adresu 71384 Weinstadt, netoli Štutgarto.

Būklė: naujas, Gamybos metai: 2026, garantijos trukmė: 12 mėnesiai, bendras plotis: 2 300 mm, bendras ilgis: 1 300 mm, bendras aukštis: 2 450 mm, įvesties srovės tipas: trifazis, Powder Coating Booth, Paint Wall, Extraction System TQN2020 Working dimensions (mm): 2000 (width) x 2000 (height) x 400 (depth) Overall dimensions (mm): 2300 (W) x 2450 (H) x 1300 (D) SPECIFICATION: • Fan power 2.2 kW • Capacity 10,500 m³/h • 3 x 100% polyester filters Fpsdod S N Szjpfx An Hon • Filtration efficiency 99.9% • IP66 control panel • Automatic filter cleaning • Hermetic IP65 lighting • Paint container Booth available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products of the BUMEX SP. Z O.O. brand are EC certified. We offer our own transport – prices are determined individually for each offer. We issue invoices with VAT shown separately. Short delivery times! Possibility to order machines in various, custom configurations and dimensions! Please contact us.

Gamybos metai: 2019, būklė: beveik kaip naujas (parodų įrenginys), Aluminum flat conveyor belt incl. 4 suspension points Fsdpfx Aod Ra Trjn Hspn Dimensions: 3000 + 520 x 105 mm Conveyor belt width: 400 mm PVC conveyor belt incl. cleats and wave edge * Optional with magnetic deflection roller at the end of the conveyor belt. * Optional with supporting frame * Special designs in all configurations possible.

Būklė: labai geros būklės (naudotas), VIENPUSĖS Briaunų apdirbimo mašina (kairė) Briaunos storis, naudojant volelius (min./maks.) mm 0,3 / 3 Briaunos storis, naudojant juostas / profilius (min./maks.) mm 0,4 / 20 Plokštės storis (min./maks.) mm 8 / 60 Valdymo sistema POWER CONTROL PC23 Powertouch / WoodCommander (pasiruošusi naudoti „TAPIO“) Padavimo greitis m/min 16–25 Viršutinis spaudimas, varomas įstrižuoju diržu Atidalinimo skysčio purškimo įrenginys – viršuje / apačioje Reguliuojamas kreipiamasis liniuotė, valdoma CNC Frezavimo įrenginys, naudojamas briaunoms apdirbti, 2 x kW 3 Šildytuvas, skirtas apdorojamoms detalėms pašildyti Klijavimo įrenginys (karštasis lydomasis klijus + ankstesnis įkaitinimo įrenginys) FE-MA-TECH + QA/PU + PU65 Briaunos spaudimo zona (valdoma CNC) „C 7“ Briaunos laikiklis voleliams (skyrius Nr. 2) su SERVO briaunos padavimo sistema Pjovimo įrenginys PK 25 (2 x kW 0,8), maks. 25 m/min Priešfrezavimo įrenginys BF20 (2 x kW 1,5) Daugiaprofilio frezavimo įrenginys MF21 (2 x kW 0,55), 0°–20° Universalus įrenginys (įskaitant frezavimą pagal spindulį ir formos frezavimą) FK 30/V20 (1 x kW 0,7), valdomas CNC Universalus frezavimo įrenginys, skirtas įpjovoms / griovelIAMS daryti ir profiliuoti SF 21 (1 x kW 5), 0°–90° Daugiaprofilio įspaudžiamųjų peilių įrenginys MN 21 (valdomas CNC) Plokšti įspaudžiamieji peiliai FA20 Šlifavimo įrenginys FA06 (2 x kW 0,18) + laisva erdvė Fedpfx Anozku Rpo Hjpn

Būklė: naudotas, mašinos/transporto priemonės numeris: 008205, Darbinio eigos „X“ ašyje sritis: 4250 mm Darbinio eigos „Y“ ašyje sritis: 1320 mm Darbinis stalas: su vakuuminiais konsoliniais atramomis Pagrindinio veleno galia: 11 kW Valdomų ašių skaičius: 4 ašys Gręžimo velenų skaičius: 31 Įrankių vietų skaičius: 22 Fpedpox A Th Rofx An Hsn