Kūno presas

Ganner - sofort verfügbar - Concept 70 Eco

Būklė: naudotas, mašinos/transporto priemonės numeris: 007986, Maksimalus skydo plotis: 1000 mm Maksimalus skydo ilgis: 2000 mm Konvejerio ilgis: 3500 mm Bodsx A Tggopfx An Howu Įvedimo sistema: su stūmikliais.

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. Bjdpfx Anoiidm Ne Hjwu - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Bwjdpog Tu Rkjfx An Heu Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointing unit Corner rounding unit, radius R = 2 mm Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Equipment for short workpieces

Būklė: naujas, Gamybos metai: 2026, CNC gręžimo ir kaiščių įkalimo automatas, skirtas pilnai automatiniam gręžimui, klijavimui ir kaiščių įkėlimui. Gręžimo ir kaiščių apdirbimo centras pasižymi kompaktiškumu, efektyvumu, kokybe ir lankstumu. Trumpas pristatymas: • Universalus CNC valdomas gręžimo ir kaiščių įkalimo įrenginys Bodjdx Axfepfx An Hewu • Klijų įpurškimo kontrolė per GIC • Uždara klijų sistema • Tinka plokščių ir masyvo apdirbimui • Papildomos horizontalios ir vertikalios gręžimo galvutės – pasirinktinai • Palengvina CNC apdirbimo centrus • Optimali papildoma įranga nestingo staklėms

Būklė: naujas, Technical specifications: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding units with pneumatic pad Pneumatically actuated sanding pad Abrasive belt size: 970 x 2150 mm Total motor power for both sanding units: 11 kW Feed belt speed with inverter: 16-18 m/sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding shoe width: 50 mm Sanding belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: ECO GEAR SYSTEM – mechanical sanding belt oscillation system without compressed air Infinitely variable feed belt speed via inverter 4-20 m/min Automatic star/delta start-up Steel roller on first unit; rubber-coated roller on COMBI unit Electronic table height display Automatic thickness reading device and table positioning Safety switches Bwsdpfx Anog A D Ans Hju Automatic machine cut-offs Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application on straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner rounding unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, integrated line control for contactless control of processing functions, as well as L-Motion control (6-axis). Suitable for ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece height from 10 – 60 mm. • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge banding. Bwjdpsl Rix Ejfx An Hju • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof design with glue supply from below (excess glue is automatically recirculated to the glue pot), precisely controllable glue application via glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic stand-by function (prevents glue from burning if the machine is not used for a longer period but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for quick colour change Optional: Quick-change system for glue pot • Pressure zone consists of a driven pressure roller synchronised with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension, ensuring optimal bonding of the edging material to the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency cross-cut saw equipped with two HF motors 0.55 kW, 12,000 rpm, two saw blades. Pneumatic swiveling from operator panel • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with carbide-tipped special cutters Motorized adjustment of the milling station (4x L-Motion) • Corner rounding unit: Automatic processing of front and rear corners up to 2 mm edge thickness for PVC/ABS edging material. (Not recommended for soft- and post-forming profiles). Option for single-sided (front or rear) or double-sided corner rounding. Motorized adjustment of the corner rounding unit (1x L-Motion) • Swiveling control panel with 10″ colour touchscreen, length counter and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finish units (3 free spaces): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder, radius changeover R1/R2 via pneumatic switching from the control panel -Flat scraper unit: Removes glue residues from the glue joint area with a gentle scraping action, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors with 0.09 kW, 1,500 rpm provide a high-quality finish

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Bwodpfxoi Hn Srj An Hju Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Būklė: geras (naudotas), Price plus VAT. The goods are also available in other quantities and configurations. This package includes: 14 upright frames at 5,000 mm x 1,100 mm (blue) 78 beams at 2,700 mm (yellow) 156 safety locking pins This results in a racking row with 13 bays, each with 3 storage levels plus ground storage—totaling 156 pallet spaces (1,000 kg per pallet). Approximately 70 uprights and 1,000 beams are available for this system. Feel free to contact us. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 5,000 mm Length: approx. 36.50 m (running metres) Racking depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Shelf load: 2,400 kg Bay load: 12,000 kg Pallet positions: 156 Accessories such as: Floor fixing Connectors Load warning signs Impact protection barriers Bodpfxjibwrue An Hswu Guard rails Wire mesh decks Rear mesh panels Depth supports Partition railings ...and much more. Just ask!

Būklė: naujas, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Bwodpjd N S T Dsfx An Hju Sliding table: 3200 x 400 mm Cutting length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Outrigger table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor input S6 40%: 7.5 kW (10.0 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight approx.: 850 kg Scope of Delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Length stop flaps • Outrigger table with roller • Push stick • Independently driven scoring unit • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double roller carriage with central and end position lock for precise cuts • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Outrigger table with roller for easier handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Supplied as standard with separately driven scoring unit (motor power 0.75 kW) • Robust saw unit with double-sided pivot elements made of cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the outrigger table, infinitely adjustable from 90° to 45°

Gamybos metai: 2017, būklė: naudotas, Used machine Year of manufacture: 2017 The TSRET04 return system from Barbaric is a workpiece return conveyor for edge banding machines. It is the most basic version in the TSRET series and performs the following functions: - Transfers the workpiece at the end of the edge banding machine. - Returns the workpiece to the height of the edge banding machine’s infeed. Functionality: After passing through the edge banding machine, the workpiece arrives on a roller table. Transfer is achieved by belt conveyors running perpendicular to the conveying direction, which rise from the roller table, lift the workpiece, move it sideways, and set it down on a slightly lower roller table. This roller table transports the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven roller track, inclined slightly towards the infeed of the edge banding machine, is connected. A stop at the end of the roller track halts the workpiece. Technical data: - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: up to 11 parts/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt: L 2,500 mm x W 800 mm - Roller track: L 2,000 mm x W 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Bjdpfxex Rpgbs An Hjwu Availability: short-term Location: Flörsheim