Nuobodu apatinio vyrio & lango rankenos

Gannomat Expert

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, nice veneer saw with planer unit Iijdpfx Asq Rb Irebvjb cutting length 3100 mm with rear stop

Būklė: naudotas, Gamybos metai: 2008, without briquetting press Filter surface 32 m² with hopper transition to container or connection to rotary valve used, top condition, low hours Make: Schuko Type: Vacomat 300 Year of manufacture: 2008 Clean air unit / negative pressure GS dust-tested, BIA-certified CE type-tested Iedpfevxlqmsx Abvsib Motor: 7.5 kW Connection diameter: 300 mm Pressure: 3090 Pa Air capacity: 5,800 m³/h Control system Filter pressure monitor Extinguishing device: powder extinguisher Original price approx. €17,000.00 Space requirement approx. 3600 x 1590 x 2550 mm / 4400 mm without hopper Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee

Būklė: naujas, Glazing Bead Nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner joints are closed - No open glazing bead gaps - No color discrepancies during paint finishing Iodpfx Abevnh T Nevjib - Glazing bead frames are easy to assign 2P Jumbo Automatic E.C. Staple Corner Joining Machine for stapling glazing bead frames. Option to select between automatic and manual operation; With angle stop, clamping device from above and in front. Pressure can be regulated separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table. Operation via foot pedal. ----- Price for this configuration upon request! Plus statutory VAT and packaging/shipping ----- Pictures show the 2P Staple Corner Joining Machine with the optional mobile work table (see details under surcharge options). Surcharges: ----- Mobile work table Height-adjustable from 700 to 1,000 mm, 2 plug-in support rails, 1,000 mm long, 2 swiveling and sliding support rails, 1,000 mm, all rails covered with felt, 4 swivel castors, 2 of which with brake. ----- Surcharge: €1,311.00 net Staples: packages 15 mm staples (pack of 2,000 pcs): Price €22.00 12 mm staples (pack of 3,000 pcs): Price €32.00 10 mm staples (pack of 3,000 pcs): Price €32.00 Dimensions and weights ----- Jumbo Automatic E.C.: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping. (Technical data as per manufacturer's information - subject to change!)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Iisdpfx Asdqzcxebvjb Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 690924, Connected load: 380V 1.84kW Speed: 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing: 640 mm Spindle rotation direction: 11x right-hand, 10x left-hand, M10 thread 2x safety clamps Pneumatic foot switch Table size: 880 x 400 mm 1x side stop with 2 flip stops 1x base stop Isdpfxeh U Dams Abveib 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact details.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, reikalingas plotis: 3 200 mm, vietos reikalavimas ilgis: 1 200 mm, reikalingas aukštis: 2 100 mm, bendras svoris: 170 kg, bendras plotis: 3 200 mm, bendras ilgis: 1 700 mm, vidinis plotis: 1 500 mm, HEAVY DUTY Drying Wagon / Cantilever Wagon – For the Toughest Demands Key facts at a glance: Iijdpfefiuhvox Abvsb 1. Ball-bearing slide rail for adjustable width from 1.70 to 3.00 m span 2. Space-saving, can be nested into each other 3. High clearance between levels – 135 mm for easy loading, even with fast work cycles 4. Upright, square-section frame for minimal support surface 5. Deep usable depth – 1,000 mm 6. High load capacity – 1,000 kg 7. Premium quality rollers, easy to move even when loaded Simply top-quality – Made in Denmark. The wagons are generally available directly from stock. To save shipping costs for our customers, we deliver the wagons pre-assembled (see picture). Set-up is quick and easy. Any questions? Contact us – we are happy to help!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Iisdpfx Abodqzh Revjb Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Gamybos metai: 2010, būklė: labai geros būklės (naudotas), I am selling window sets suitable for CNC window manufacturing centers: LEUT wood-aluminium 110 mm Bore 50 mm. Iijdpfeg Tumyjx Abveb Complete set. Very good condition. Available as a set. Also possible to purchase individually.

Būklė: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Iisdpfx Abed Rg Dpjvob Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW

Gamybos metai: 2024, būklė: naujas, Vežimėlis profilių transportavimui ir sandėliavimui vertikalioje padėtyje COMALL CARR 300 Q, naujas Techninės specifikacijos: - 10 skyrių, darbinis dydis 128 mm Iisdpfx Absf Nk H Hjvjb - Kontaktiniai paviršiai padengti nesibraižančia ir smūgiams atsparia plastikine medžiaga - 4 ratai, Ø 125 mm, 2 iš jų su fiksavimo mechanizmu - Reguliuojamos atramos – 5 skirtingos padėtys - Guminis atraminis stalas - Keliamoji galia: 650 kg