Pasukama frezavimo staklės / veleno formavimo įrenginys

SCM Holzkraft Minimax t 55 es LL

Būklė: naujas, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Iedpfx Asgtm U Aoausar Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Būklė: naujas, Gamybos metai: 2026, Technical data: • Extraction capacity ~ 5200 m³/h • Motor power 3.0 kW • Speed 3000 min⁻¹ • Voltage 400 V, 50 Hz • Extraction connection 250/200 mm • Filter area 13.7 m² • Air velocity 28 m/sec • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300 kg • Filter category G • Filter material Polyester Iodpfxjd H Rf Te Aauear • Noise level 80 dB (without connection), 65 dB (when connected to the machine via a duct) Scope of delivery: • Complies with H-2 standard • Polyester filters, 5 microns • 2 containers • Undercarriage • Filter cleaning with vibration system and control unit + €850 for models with fire extinguisher (Safe System)

Būklė: geras (naudotas), Gamybos metai: 1981, Spindle moulder, spindle moulding machine, woodworking milling machine - Manufacturer: Martin, spindle moulder model T 21 with table extension - Milling spindle: 30 mm diameter arbor - Speeds: 3 rpm settings - Overall dimensions: 1620 x 1060 x H1120 mm Iodswnbfkspfx Aaujar - Total weight: 698 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump delivery rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Iasdpfx Aaou Egp Ijuer Heating temperature: max. 200 °C Heating capacity: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: b-r-l-t-t-b Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Chamfering unit included Separate motor for each spindle Electronic feed with brake, infinitely variable 5-40 m/min Durofer spike-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump Iasdpfx Asrq Ebfoauer WEINIG Comfort Set Control system: WEINIG MEMORY PLUS SYSTEM CE mark Declaration of conformity

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW Isdpfx Aajrigxyouear - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Iasdedqzcxjpfx Aauor Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-removable 30 mm Isdpfofpb Nmjx Aauoar Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Solid German engineering Spindle moulder with single-sided tilting, fixed spindle for a swiveling range from -5° to +45.5° Electronic positioning control for height and tilt adjustment, with zero point reset for height and offset positioning Electronic displays for position and spindle speed 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick clamping system for cutters Finely planed grey cast iron table with fixed frame support Control panel mounted below the fixed frame support Fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle diameter 30 mm, non-removable CE compliant GS tested

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 400 mm, juostinio pjūklo ilgas: 5 550 mm, pjūklo juostos plotis: 80 mm, stalo ilgis: 800 mm, stalo plotis: 1 060 mm, darbinio aukščio: 400 mm, - itališkos gamybos - lamelių pjovimo juostinis staklės - nedažytas - labai gera būklė - naudotas pjūklas Pjūklas: - ratų skersmuo: 800 mm - didžiausias pjūklo plotis: 80 mm - didžiausias pjovimo aukštis: 400 mm - pagrindinis variklis: 11 kW - pastūmos greičio diapazonas: 2–40 m/min - pastūma su pneumatiniu spaudimu prie kreiptuvo - įvado metalinis slystantis volelis - pjūklo ilgis: 5550 mm Iedpfew H Rq Hex Aauoar - juostos atstumas nuo korpuso: 780 mm - sraigtinis juostos įtempimas - stalo matmenys: 1060x800 mm - darbinis stalas pasviręs 15° kampu - ištraukimo angos skersmuo: 120 mm - pjūklo drėkinimo sistema - kojinis stabdis - lieti ratlankiai - žvaigždės / trikampio paleidimas - maitinimas: 380V - matmenys ilgis/plotis/aukštis: 1600x1100x2400 mm - svoris: 860 kg Pastūma: - metalinis dantytas traukimo volelis - penki pastūmos greičiai su keitimu diržu - volelio aukštis: 30 mm - pastūmos variklis: 0,75 kW - spaudimas

Būklė: naujas, Glass Bead Nailing Machine "2 P Jumbo automatic E.C." – new – Your Advantages: - The corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames are easy to match 2P Jumbo Automatic E.C. Staple Corner Jointing Machine For stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, top and front clamping device Pressure can be adjusted independently. Insertion of parallel and overlapping staples via electronic programmable control possible. Stapling unit can be mounted on a suitable work table, Operation via foot valve. ----- Price for this version on request! Plus statutory VAT as well as packaging/shipping ----- Images show the 2P Staple Corner Jointing Machine with the optional movable work table (see details under Surcharges) Surcharges: ----- Movable work table Height-adjustable from 700 – 1000 mm, 2 plug-in support rails 1000 mm long, 2 tiltable and movable support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 of which with locking device. ----- Surcharge: 1,321.00 Euros net Staples: Packages 15 mm staples (pack of 2,000 pcs.): price 22.00 Euros 12 mm staples (pack of 3,000 pcs.): price 32.00 Euros 10 mm staples (pack of 3,000 pcs.): price 32.00 Euros Dimensions and Weights ----- Jumbo Automatic E.C.: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices are net. Plus statutory VAT. Ex works plus packaging and shipping Ijdpfx Ajvnh T Noauoar (Technical data according to manufacturer – no liability accepted!)