Universalus apdirbimo centras

DMG MORI DMU 60evo

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 Nwedpfxjxgnz Tj Agiec - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Sąlyga: labai geros būklės (naudotas), CNC tekinimo staklė DMG CLX 450 V3, 2018 metų, su Siemens valdymu, labai geros būklės. Nodpsx Hqh Ssfx Agiowc

Sąlyga: naudotas, Gamybos metai: 2012, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, Travel range: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B axis swivel range: -5° to +110° C axis: 360° Load capacity: 400 kg, direct measuring systems including table cooling Dynamic package: Linear drive in X/Y axes Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Active chiller for main spindle, linear drive, and table Control: Siemens 840D SL Operate Spindle: 20 - 24,000 rpm HSK-A63 according to DIN 69893 Nedpfx Asyc Tthjgiowc • Tool magazine: chain-type magazine with 60 stations • Tool length measurement and tool breakage monitoring Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (IKZ), paper filter 40 bar, 231 l/min, tank 600 l, including rotating inspection window, linear systems sealing air, bed flushing • Air blast through the spindle center selectable via M-function, conditioned air with low oil content • Electronic handwheel • Spray gun for chip flushing • Extended chip flushing • Laminated safety glass for working area door and side window • Operating mode 4 • High speed settings • Touch probe Blum HSK-A63 • 3D QuickSet preparation • Optional: oil mist extraction system • New spindle at 25,800 spindle hours

Sąlyga: naudotas, Gamybos metai: 2014, x eiga 600 mm y eiga 500 mm z eiga 500 mm Bendra energijos poreikis --- kW Staklių svoris apie 9,6 t Reikalinga erdvė apie --- m DMG MORI DMU 60 EVO (2014) X - 600 mm Y - 500 mm Z - 500 mm Nwsdpfx Agsycxinsiec Heidenhain iTNC530 su matavimo davikliu TS649 Veleno apsukos: 14 000 aps./min. Įrankių žurnalas 60 vnt. / Įrankių tvirtinimas HSK63 Juostinis filtro įrenginys su vidiniu aušinimu 40 BAR

Sąlyga: naudotas, Gamybos metai: 2012, veikimo valandos: 5 991 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11415584024, For sale is a 5-axis CNC machining center DMG MORI DMU 50, manufactured in 2012 and equipped with Siemens control. The machine is in good, well-maintained condition and was in operation until recently. A powered inspection is possible at any time by appointment. The DMU 50 is a vertical machining center with an integrated NC rotary/swivel table, ideal for precise 5-axis complete machining of complex workpieces. Typical applications include tool and mold making, the production of precision components, as well as prototypes and small to medium batch runs. Technical Data (excerpt): Manufacturer: DMG MORI / Deckel Maho Model: DMU 50 Machine type: Vertical 5-axis CNC machining center Year of manufacture: 2012 Control: Siemens Number of axes: 5 simultaneous X travel: approx. 500 mm Y travel: approx. 450 mm Z travel: approx. 400 mm Spindle: Vertical motor spindle, up to approx. 14,000 rpm Tool changer: automatic, approx. 30 tool stations Country of manufacture: Germany Worktable Simultaneous rotary/swivel table Control system 3D control: Siemens 840D solutionline Main drive Spindle speed up to 14,000 rpm, SK40 Tool magazine Tool magazine 60 positions, SK40 vertical chain Automation / Measuring / Monitoring Infrared probe TS649 DMG Direct measuring systems X/Y/Z Coolant / Chip removal Nodpox S D N Tsfx Agiewc Coolant-air switching Rinse gun for chip flushing SIEMENS control options Electronic handwheel General options Operating mode 4 Second cabin door Special features Rotating safety glass (S-K3008) Operating hours (according to counter): Machine hours: approx. 31,987 h Spindle hours: approx. 10,489 h Condition & Scope of delivery: Used, fully functional, regularly in use. Scope of delivery includes the machine as pictured; further accessories upon negotiation. Other: Location: Birkenfeld (75217)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, bendras svoris: 10 000 kg, PREMIUMLISTNING – DMG MORI DMU 60 eVo (2017) | 5-axlig | TNC 640 | 120 verktyg | Automationsklar | 40 bar Översikt Erbjuds: en högspecificerad DMG MORI DMU 60 eVo 5-axlig fleroperationsmaskin, tillverkad i Tyskland, med kraftfull utrustning för krävande produktion. Maskinen är förberedd för automation, vilket gör den idealisk för obemannad drift samt framtida pall-/robotintegrering. Viktiga egenskaper • Årsmodell: 2017 • Styrsystem: Heidenhain TNC 640 (ERGOline® styrning, 19" skärm) • 5-axlig NC-vridbord (B-axel -5° till +110°, C-axel 360°) • Verktygsmagasin med 120 platser • Höghastighetsspindel upp till 18 000 varv/min, SK40 BIG-PLUS • Automationsklar + utökad M65-interface • Geometriskt inspektionsprotokoll från DMG MORI tillgängligt Konfiguration & Utrustning (som levereras) Styrning / Programvara / Manövrering • Heidenhain TNC 640, ERGOline® styrning, 19" display • Driftläge 4 – processövervakning i produktion • Elektroniskt handratt 5-axligt bord / Mätning • NC-vridbord 600 × 500 mm • B-axel -5° till +110°, C-axel 360° • Max belastning: 400 kg • Direktmätsystem (rotationsaxlar) • Renishaw OMP60 optisk IR-mätprob Spindel / Verktyg / Magasin • Spindelanslutning: SK40 BIG-PLUS 18 000–20 000 varv/min 35 kW (40 % ED) / 25 kW (100 % ED) • Verktygsmagasin: 120 platser (kedjemagasin med dubbelgripare) • Verktygsbrottdetektering TRS2 (beröringsfri detektering; anpassad för små diametrar) Kylvätska / Spånhantering / Inkapsling • Intern kylvätskeförsörjning (IKZ), 40 bar (pappersbandsfiltertank 600 L) • Spåntransportör • Utökad spolning av arbetsområde • Spånspruta • Spindelcentrerad luftrensning (via M-funktion, konditionerad luft med låg oljehalt) • Roterande säkerhetsfönster (roterande inspektionsruta) • Oljedim- och emulsionsavskiljare (mekanisk) Nwjdpfjygky Tox Agiec • Automationsklar • Utökad M65-interface Uppkoppling / Service • DMG MORI Messenger (installationskit för maskinuppkoppling) • DMG MORI Netservice-klient (support för fjärrdiagnostik via extern PC)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Tischgröße 600 x 500 mm Durchmesser, Tischbelastung 400 kg, Verfahrwege XYZ 600 x 500 x 500 mm, B-Achse -5/+110 Grad, C-Achse 0,001 Grad, Eilgang 80 m/min, Werkzeugwechsler mit 120 Plätzen, Nwedpfxownpzaj Agioc Spindelaufnahme HSK 63, Spindeldrehzahl 20.000 U/min, Steuerung Siemens 840D eRGOline, Späneförderer, Innenkühlung durch die Spindel.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 250 mm, sukimosi skersmuo virš skersinio stumduko: 500 mm, tekėjimo skersmuo: 390 mm, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 65 mm, X ašies eiga: 450 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 1 300 mm, strypo praėjimas: 65 mm, bendras aukštis: 2 700 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, bendras svoris: 12 000 kg, Įranga: dokumentacija / vadovas, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant and chip conveyor - Differential pressure chucking main/sub spindle Nsdpfxjubyv Re Agijwc - Workpiece pick-up device - Bar feeder preparation (optional available) Technical Data: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B axis: 220° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 34 kW Sub spindle speed: 6000 rpm Sub spindle through-bore: 52 mm Sub spindle power: 20 kW Tool changer: 24 positions B-axis interface: HSK 63 B-axis spindle speed: 12000 rpm B-axis power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: - Full enclosure - CNC-controlled swivel head as B-axis - Coolant system and chip conveyor - Documentation - Geometrically within new machine tolerances Condition: - Machine fully functional - Geometry within manufacturer’s new machine tolerance - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and sub spindles overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Telescopic covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, inspection windows replaced - Maintenance according to manufacturer’s specifications performed

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, DMG-Mori DMU 60 Evo Linear Valdymas Heidenhain ITNC 530 HSCI NC pasukamas-šlifuojamas stalas 600 mm x 500 mm Nwsdpfxoxvhtnj Agioc B ašies pasukimo diapazonas -5° iki +110° C ašis 360°, įskaitant stalo aušinimą Veleno apsukos 20 - 24 000 aps/min HSK 63 A Įrankių magazinas su 120 vietų Infraraudonųjų spindulių matavimo jutiklis Renishaw OMP 60 Dynamic paketas, Lazerinis įrankių matavimas IKZ su 40/80 barų su popierinės juostos filtru 980 l, drožlių transporteriu Elektrinis rankinis ratas. 3D Quickset ATC, programuojami aušinimo purkštukai per M-funkciją Darbo režimas 4 Tropic paketas

Sąlyga: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 21 000 h, Funkcionalumas: visiškai funkcionalus, DMG MORI DMU 60 Evo 5-axis simultaneous machining center (2014) Manufacturer: DMG Mori Model: DMU 60 Evo 5-axis simultaneous Year of manufacture: 2014 Condition: Good, used, new spindle in 2024 Power-on hours: 37,063 h Spindle hours: 21,313 h Control: Heidenhain ITNC 530 Condition: Used, ready for operation Travel (X/Y/Z): 600/500/500 mm Rapid traverse: 80 m/min Spindle speed: 20–14,000 rpm Tool magazine: 30 positions Tool holder: SK40 NC swiveling rotary table: 600 x 500 mm Njdpewp Ic Ejfx Agiewc Internal coolant supply (IKZ): 40 bar with belt filter system Measuring probe: TS649 Documentation

Gamybos metai: 2009, Sąlyga: naudotas, Technical Details: Tool holder: Ø 54 mm Voltage: 3-phase AC 400V / 50–60 Hz Compressed air connection: 6 bar Total power requirement: 11 kW Total weight approx.: 120 kg Dimensions L x W x H: 0.7 x 0.65 x 1.7 m Induction shrink-fit machine with water cooling (30-litre tank integrated in the housing) Nwsdpfxewp I S He Agisc Application: for ultra-fast tool changing via targeted induction heating Cooling medium: Emulsion For tools Ø 3–50 mm (solid carbide) and Ø 6–50 mm (HSS) Tool holder Ø 54 mm Runout accuracy < 0.003 mm ThermoGrip shrink chuck ISGS 3200-1, Ø 3–32 mm Operation via control panel