APDIRBIMO CENTRAS

AWEA BM-1500 II

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 13 450 mm, bendras plotis: 4 135 mm, bendras ilgis: 3 092 mm, keliamoji galia vienai sandėliavimo sekcijai: 400 kg, įėjimo įtampa: 400 V, keliamoji galia: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Number of trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid while the system is still available Technical specifications for each Logimat: – Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg – Maximum tray capacity (approx.): 91 trays, 400 kg each, evenly distributed – Tray dimensions: 3625 x 815 x 100 mm – Tray dead weight: 70 kg – Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm Djdpferu A Atsx Admjcr – System footprint (approx.): 12.8 m² – Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² – Average tray retrieval time: 26 sec – Maximum tray retrieval time: 26 sec – Average tray exchange time: 51 sec – Maximum tray exchange time: 72 sec – Machine weight without trays: 5200 kg – Equipped with LogiTilt – Equipped with LogiPointer – Equipped with LogiGate – Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if required. Photos and videos of operation and dismantling available upon request by email. Price: special export price Price: excl. VAT Availability: in stock We have 3 Schäfer Logimat units in stock Machinehandel De Leeuw BV specializes in used paternoster systems, including Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Sąlyga: geras (naudotas), Gamybos metai: 2015, Labai geras įrenginys – tikslus ir patikimas... dirbo tik vienoje pamainoje (8–10 valandų per dieną) Dedpfx Adov Acphomscr

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 1 139 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 599 mm, tekėjimo skersmuo: 530 mm, ašies variklio galia: 11 000 W, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno skylė: 56 mm, X ašies eiga: 530 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 599 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, Outstanding machine with the option for integration with a brand new IEMCA Master 52 bar feeder, featuring only 1,100 operating hours. Multitasking capability enables simultaneous milling and turning operations. Rugged and precise construction with a rigid cast iron frame. Dcjdpfevv Tvfex Admor Dual tool magazines: Revolver turret plus an internal magazine housing an additional 12 CAPTO tools stored securely inside, 12 tools mounted on the turret, and 6 hybrid square 25 mm tool holders (refer to the attached technical data sheet). Twin spindle design allows for secondary operations. Equipped with Fanuc 0i-TF CNC and Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Full documentation provided. Also equipped with transformer, chip conveyor, 15-bar coolant pump, presetting device, parts catcher and finished part output conveyor, and work lamp.

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Dcodpsu Atmujfx Admsr Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Machine Type: Vertical Machining Center Manufacturer: DMG MORI Model: CMX 600 V Year of Manufacture: 2020 Control: 840D SL Slimline Multi Touch Operate 4.7 Country of Origin: DE- Delivery Time: By arrangement Freight Terms: Ex location Technical Details X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 510 mm Control: 840D SL Slimline Multi Touch Operate 4.7 Main Spindle: Max. speed: 12,000 rpm Drive power - main spindle: 13 / 9 kW Max. torque: 82 / 54 Nm Tool holder: SK 40 Distance spindle nose to table: 120 - 630 mm Work Table: Dcodporwi Swsfx Admsr Clamping surface: 900 x 560 mm Max. table load: 600 kg T-slots: 5 Working height: 850 mm Tool Magazine: Number of tool stations: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter (with adjacent stations empty): 130 mm Max. tool length: 300 mm Max. tool weight: 8.0 kg Tool change time (tool-to-tool): 2.4 sec Tool change time (chip-to-chip): 6.7 sec Feed Rates: Rapid traverse: 30 m/min Feed force: 5 kN Max. feed rate: 30,000 mm/min Total Power Requirement: 32 kVA Machine Weight approx.: 5.0 t Floor Space approx.: 4.0 x 5.0 x 3.0 m Accessories Documentation Chip conveyor Coolant system High-pressure coolant: 12 bar Internal coolant supply Electronic handwheel Signal lamp – 4 colors Measuring probe: PP40 Tool measurement

Sąlyga: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, MITUTOYO Contracer CV-2100M4 Contour Measuring Machine Measuring range horizontal X = 100 mm Measuring range vertical Z = 50 mm Column travel range Z2 = 350 mm Inclination +/- 45° Dcedpfx Adsvun Tpsmer Dimensions (W x D x H): 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Including PC system Including 218-001 cross table Including 2028-003 rotating vise

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. Dcodpfxotyyn He Admer 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Sąlyga: geras (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 550 mm, CNC control Heidenhain TNC620 4th axis (NC rotary table) Electronic handwheel 24-position tool changer Dcsdpotqd E Ejfx Admjr ICS (internal coolant supply) Chip conveyor Extraction system Technical data: X-axis travel: 1000 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Spindle taper: SK40 Spindle speed range: 10,000 rpm Table clamping area: 1000 x 600 mm Number of tool positions in changer: 24 Spindle drive power 40% duty cycle: 13.5 kW Weight approx.: 6000 kg Technical data, accessories and machine description are non-binding.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 2 500 mm, Z ašies eigos atstumas: 760 mm, greitas poslinkis X ašimi: 20 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 15 m/min, ruošinio svoris (maks.): 12 000 kg, bendras aukštis: 48 500 mm, bendras ilgis: 85 800 mm, bendras plotis: 56 000 mm, stalo plotis: 2 400 mm, stalo ilgis: 3 020 mm, bendras svoris: 20 kg, veleno greitis (min.): 10 aps./min, veleno greitis (maks.): 6 000 aps./min, atstumas nuo stalo centro iki veleno galo: 960 mm, veleno nosis: ISO 50, įrankio ilgis: 350 mm, įrankio skersmuo: 127 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Vertical gantry machining centre "AWEA LP-3025" Dcsdpfx Aorl Svrjdmsr

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, centro aukštis: 100 mm, šlifavimo disko skersmuo: 350 mm, ruošinio svoris tarp centrų: 20 000 g, atstumas tarp centrų: 400 mm, įvesties srovės tipas: trifazis, šlifavimo ratuko plotis: 30 mm, veleno greitis (maks.): 1 200 aps./min, veleno greitis (min.): 30 aps./min, padavimo ilgis Z ašis: 420 mm, šlifavimo veleno variklio galia: 3 000 W, bendras svoris: 1 600 kg, paskutinio kapitalinio remonto metai: 2025, įėjimo įtampa: 400 V, Cilindrinis šlifuoklis STUDER S 20 Favorit TECHNINĖS CHARAKTERISTIKOS: Pagaminimo metai: 1997 Atstumas tarp centrų: 400 mm Centrų aukštis: 100 mm Z ašies eiga: 420 mm Darbinis padavimo greitis Z ašyje: 100 – 3500 mm/min Stalo pasukimo kampas: 0 – 30° Šlifavimo veleno variklio galia: 3 kW Didžiausias šlifavimo disko skersmuo: 350 mm Didžiausias šlifavimo disko plotis: 30 mm Dcodpfx Adewt Tgwomsr Šlifavimo disko tvirtinimo skersmuo: 127 mm Ruoinio veleno galas: W20 Ruoinio veleno min. greitis: 30 aps./min Ruoinio veleno maks. greitis: 1200 aps./min Maks. detalės masė laikiklyje tarp centrų: 20 kg Ruoinio pasukimo diapazonas: 0° / +90° Ruoinio veleno galia: 0,5 kW Uždėjimo centras: MT2 Galvutės sustūmos eiga: 20 mm Maitinimo įtampa: 400 V Bendras reikalingas galingumas: 8 kVA Staklių matmenys: 2350 x 1480 mm Svoris: 1600 kg KOMPLEKTACIJOJE: x1 popierinės juostos filtravimo įrenginys x1 SONY LH 31A dviejų ašių skaitmeninė padėties rodymo sistema x1 WALDMANN LED lempa x1 vidinio šlifavimo velenuas tipas 82060B, greičiai: 11 900–28 400 aps./min x1 SENSITRON kontaktinis indikatorius x1 šlifavimo disko balansavimo įrenginys x1 šlifavimo disko balansavimo velenas x1 trijų žandų griebtuvas FN Ø100 mm MT3 x1 magnetinis griebtuvas Ø160 mm MT3 x1 stalas su disko apdorojimo įtaisu x37 W20 griebtuvai x2 pusiniai centrai x2 pilni centrai x1 bukas centras x1 skriemulys Ø105 mm vidinio šlifavimo velenui x2 išorinio šlifavimo diskų flanšai x1 TYROLIT 494271 šlifavimo diskas išoriniam šlifavimui Įvairūs vidiniai šlifavimo diskai x4 ruoinių laikikliai Įvairūs kiti priedai Staklės įjungtos demonstruojamos mūsų patalpose tik iš anksto susitarus. Kaina pagal užklausimą, krovimas į transporto priemonę įskaičiuotas. Galimas pristatymas visame pasaulyje. Šio puslapio informacija pateikta geriausiomis mūsų žiniomis, tačiau jos tikslumas negarantuojamas. Panašūs įrenginiai: Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Vidinis ir išorinis šlifavimas (ID/OD). Taip pat galite domėtis paviršiaus šlifuokliu, tekinimo staklėmis, apdirbimo centru, frezavimo staklėmis.