Universalus apdirbimo centras

DMG MORI DMU 60 eVo

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 80 m/min, greitas poslinkis Y ašis: 80 m/min, greitasis eiga Z ašyje: 50 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC530, stalo apkrova: 400 kg, veleno greitis (maks.): 24 000 aps./min, veleno veikimo valandos: 17 917 h, įrankių magazino lizdų skaičius: 60, Įranga: sūkių greitis be galo kintamas, Machine Description: - Universal 5-axis milling machine with linear drives on X and Y axes, rapid traverse 80 m/min - Spindle and geometry in very good condition - Regularly serviced - Last spindle replacement: 08/2020 / New control panel installed: 09/2025 - Current operating hours: Machine ON: 58,985 h / Spindle ON: 17,917 h - Machine location: Lower Austria (near Vienna) Travel Range: X-axis (longitudinal): 600 mm Y-axis (cross): 500 mm Z-axis (vertical): 500 mm Clamping Table / Working Area: Integrated NC rotary table: 600 x 500 mm Table load capacity: 400 kg Control System: Heidenhain iTNC530 Spindle: Kjdpfx Aeya U Ibef Iswt Speed range: 24,000 rpm Tool holder: HSK63 Coolant System and Chip Disposal: External coolant with 3 nozzles: 4 bar Internal coolant: 40 bar Paper band filter Scraper-type chip conveyor Automatic Tool Changer: Tool holder: HSK63 Positions: 60 Dimensions and Weight: Machine: Length 2,900 x Width 2,611 x Height 2,865 mm Weight: ~9,800 kg Additional Equipment and Accessories: › Heidenhain TS 649 touch probe › Heidenhain electronic handwheel › Blum laser tool measurement system on table › Chip flushing pistol › 3D Quick Set › ATC cycle package › Operating mode 4 › Integrated oil mist extraction › Operating manual / Documentation › Dynamic package: linear drive 80 m/min including active cooler

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, X ašies eiga: 2 600 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 700 mm, greitas poslinkis X ašimi: 40 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, stalo plotis: 750 mm, stalo ilgis: 2 900 mm, stalo apkrova: 2 150 kg, 5-Axis Machining Center DMG MORI - DMF 260-7 X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis travel: 360,000° B-axis travel: -110 to +110° Table length: 2900 mm Kedpfsxuqv Ajx Af Iowt Table width: 750 mm Table load capacity: 2150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant unit: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Stalo dydis 600 x 500 mm skersmens, stalo apkrova 400 kg, XYZ eiga 600 x 500 x 500 mm, B ašis -5/+110 laipsnių, C ašis 0,001 laipsnių. Greiti važiavimai 80 m/min, 60 vietų įrankių keitiklis, veleno kūgis HSK 63, veleno greitis 20 000 aps./min, Siemens 840D Ergoline valdymas, drožlių transporteris, aušinimas per veleną. Kedpfx Aew Nq E Usf Iswt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, DMG-Mori DMU 60 Evo Linear Valdymas Heidenhain ITNC 530 HSCI NC pasukamas-šlifuojamas stalas 600 mm x 500 mm B ašies pasukimo diapazonas -5° iki +110° C ašis 360°, įskaitant stalo aušinimą Veleno apsukos 20 - 24 000 aps/min HSK 63 A Įrankių magazinas su 120 vietų Infraraudonųjų spindulių matavimo jutiklis Renishaw OMP 60 Dynamic paketas, Lazerinis įrankių matavimas IKZ su 40/80 barų su popierinės juostos filtru 980 l, drožlių transporteriu Elektrinis rankinis ratas. 3D Quickset ATC, programuojami aušinimo purkštukai per M-funkciją Darbo režimas 4 Kwodpfx Afexvhtno Ist Tropic paketas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 800 mm, greitas poslinkis X ašimi: 40 m/min, greitas poslinkis Y ašis: 40 m/min, greitasis eiga Z ašyje: 40 m/min, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: TNC 530i, stalo plotis: 870 mm, stalo ilgis: 3 500 mm, stalo apkrova: 3 500 kg, sukamosios stalo skersmuo: 800 mm, bendras svoris: 24 000 kg, veleno greitis (min.): 60 aps./min, veleno greitis (maks.): 12 000 aps./min, aušinimo skysčio tiekimas: 20 juosta, ašies variklio galia: 22 W, veleno nosis: ISO 40, įrankių magazino lizdų skaičius: 60, įrankio ilgis: 300 mm, įrankio skersmuo: 76 mm, įrankio svoris: 8 g, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, Universalus naudotas apdirbimo centras su judančiu stovu, 5 ašių, su CNC Heidenhain TNC-530, pasukama galva, integruota pasukama stalu. Kwedoxixn Njpfx Af Iet

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, Įranga: drožlių transporteris, sūkių greitis be galo kintamas, DMG-MORI DMU 60 EVO linear, 2014 m. X/Y/Z eiga: 600 mm x 500 mm x 500 mm Pagrindinis velenas SK40 su 18 000 aps./min. NC pasukamas-sveriamas stalas, B ir C ašys Įrankių sandėlis su 60 vietų Šilumokaitis velenui ir stalui Kjdpsxvhrwofx Af Iowt Dynamic paketas Siemens 840 D SL valdymas su Shop-Mill Infraraudonųjų spindulių matavimo zondas Heidenhain TS 649 Blum lazerinis įrankio matavimas Grandininis transporter, IKZ su popieriniu juostiniu filtru ir 80 bar slėgiu Alyvos rūko-emulsijos separatoriaus Programuojamos aušinimo skysčio purkštukai Elektrinis rankenėlė, darbo režimas 4 Staklių tekinimo ir frezavimo ciklas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system Kwjdoxgnz Tspfx Af Iet - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 5 650 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS Bar Loader Fanuc 31iB – 5,646 operating hours Country of Manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub-spindle Maximum bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Tool set 2 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm End unit Number of positions: 4 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Kwsdpfx Afskhnqgj Ijt Subsequent machining Number of positions: 6 Number of driven positions: 6 Speed of driven tools: 8,000 rpm Electrical supply Mains voltage: 400 V All technical specifications are provided subject to errors and omissions.

Sąlyga: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 21 000 h, Funkcionalumas: visiškai funkcionalus, DMG MORI DMU 60 Evo 5-axis simultaneous machining center (2014) Manufacturer: DMG Mori Model: DMU 60 Evo 5-axis simultaneous Year of manufacture: 2014 Condition: Good, used, new spindle in 2024 Power-on hours: 37,063 h Kwsdswp Ic Espfx Af Iet Spindle hours: 21,313 h Control: Heidenhain ITNC 530 Condition: Used, ready for operation Travel (X/Y/Z): 600/500/500 mm Rapid traverse: 80 m/min Spindle speed: 20–14,000 rpm Tool magazine: 30 positions Tool holder: SK40 NC swiveling rotary table: 600 x 500 mm Internal coolant supply (IKZ): 40 bar with belt filter system Measuring probe: TS649 Documentation

Sąlyga: geras (naudotas), NC Rotary Table with Motorized Drive Infinitely Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Total Height: 319 mm T-Slots: 7 pcs T-Slot Size: 22 H7 mm T-Slot Spacing: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optionally available with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is in the sector of machining and milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service Kwsdpfx Ajfr Ih Def Ijt - Machine service - Machine overhauls - Control system modernizations