Šerdelės vamzdžių lenkimo staklės
Jutec Biegesysteme GmbH & Co. KG Dornbiegemaschine Biegesystem 5000S

Name: Jutec Biegesysteme GmbH & Co. KG Dornbiegemaschine Biegesystem 5000S
Brand: Jutec Biegesysteme GmbH & Co. KG
Availability: InStock

Gamybos metai

2026

Sąlyga

Naujas

Vieta

Limburg an der Lahn Vokietija

Šerdelės vamzdžių lenkimo staklės Jutec Biegesysteme GmbH & Co. KG Dornbiegemaschine Biegesystem 5000S

Jutec Biegesysteme GmbH & Co. KG Dornbiegemaschine Biegesystem 5000S

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Šerdelės vamzdžių lenkimo staklės

Gamintojas:: Jutec Biegesysteme GmbH & Co. KG

Modelis:: Dornbiegemaschine Biegesystem 5000S

Gamybos metai:: 2026

Sąlyga:: naujas

Kaina ir vieta

Vieta:: Robert-Bosch-Straße 8, 65549 Limburg an der Lahn, Deutschland

nuoma:: yra įmanoma

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A11723360

Naujinta paskutinį kartą:: Data 2026.01.09

Aprašymas

THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII:

The bending machine with a free-standing bending head can be easily converted for complex geometries to right or left bending. The plug-in bending tools enable rapid changeover to different tube sizes. Fast hydraulics to reduce non-productive time is an important factor for series production.

The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick as required) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, length measurements, and rotation angles for up to 50 bending sequences on one tube length. To monitor springback values, there is a freely programmable database for up to 200 materials.

The machine has 2 operating modes: In "Simple Bending", the length and rotation of the arcs relative to each other are automatically displayed. In "Controlled Bending" mode, the data is entered beforehand, and during bending a continuous actual/target comparison occurs.

This ensures mispositions within a tolerance window are eliminated, minimizing user-related error rates. General error messages are displayed in full text on the large screen. Mandrel retraction is programmable and can be automatically withdrawn early once the bend angle is reached.

The compact drive unit with detachable mandrel holder offers advantages for use on-site as well as for special applications with very large tube feed and is also available as a stationary version with an organization system for tools and mandrel rods. The affordable alternative to fully controlled CNC machines.

POSSIBLE APPLICATIONS:

• Hydraulic piping
• Pipeline construction
• Plant engineering, e.g., chemical industry
Bjdpfx Asng Exajgiscw
• Metalworking
• Prototype construction
• Technical Data:
• Bending capacity Ø 6 to 50 x 4 mm, depending on material
• Bend radius min/max: 10 mm/140 mm
• Minimum bending radii: 1.5 x Ø (standard 2 x Ø)
• Multifunctional machine control, bend angle setting (0.1°)
• Mandrel holder lengths 1500/3000/4500/6000 mm (special versions available longer)
• Maximum 180º bending result
• Weight 800–900 kg (depending on configuration)
• Ergonomic operation via safety foot switch

OPTIONAL ACCESSORIES:

• Automatic mandrel lubrication (minimum quantity)
• Pneumatic or hydraulic quick-release chuck
• Positioning of length and rotation via automatic brake function or manual stops with foot switch
• Automatic positioning of length and rotation via servo motors
• Pneumatic rotation stop
• Tube calculation software
• Laser-assisted tool monitoring for checking tool clamping force
• 10-inch touch screen with integrated tube calculation
• Bending radius up to 250 mm
• Data transfer via cable (LAN), wireless (WLAN), or USB

OUR ON-SITE SERVICE:

• Welcome to test production in our demo room
• Consultation and information session at your site
• Consulting and handling of leasing/financing purchase through JUTEC
• Trade-in of your current machine
• Service contracts, maintenance at your location

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2023

10 Skelbimai internetu

Skambinti

Pateikti užklausą

Pranešimas*

Pavadinimas*

El. paštas:*

Telefonas

Bendrovė

Pašto kodas ir miestasžemė

Esu prekybos agentas

Gaukite pasiūlymus dėl panašių mašinų

Pastaba: Jūsų užklausa bus perduota visiems šios mašinų kategorijos pardavėjams. Dėl to galite gauti labai daug pasiūlymų.

Privatumo pareiškimas

Telefonas & Faksas

+49 6431 ... skelbimai

Pridėti prie stebėjimo sąrašo

Dalintis Pranešti apie skelbimą

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Pluoštinio lazerio pjovimo staklės Bodor A3

Türkei

1 993 km

Pluoštinio lazerio pjovimo staklės
Bodor A3

Skambinti

Sąlyga: naujas, Gamybos metai: 2025, Taikoma medžiaga: metalas Būklė: Naujas Lazerio tipas: Pluoštinis lazeris (Fiber Laser) Pjovimo plotas: 3000*1500 mm Pjovimo greitis: 0–40 000 mm/min Palaikomi grafiniai formatai: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Pjovimo storis: 0–30 mm CNC valdymas: Taip Aušinimo būdas: Vandens aušinimas Valdymo programinė įranga: Bodor Thinker Kilmės šalis: Kinija Prekės ženklas: Bodor Sertifikatai: CCC, CE, GS, ISO, SGS Lazerio šaltinio gamintojas: Bodor Lazerio galvutės gamintojas: bodorgenius Valdymo sistemos gamintojas: bodorpro Svoris: 2200 kg Pagrindiniai pardavimo akcentai: Įleistinės jungties (lemeninės įpjovos) tipo sudurimo suvirinimo konstrukcijos lova Garantija: 3 metai Lazerio galia: 1000 W Bcedpog Eghdofx Agisw Maitinimas: 110V / 220V / 380V, 50Hz / 60Hz

Peržiūrėti detales

Mažas skelbimas

Lakštinio metalo šalinimo mašina TFON Surfacer® TF-RB 2510

Fevziçakmak

2 026 km

Lakštinio metalo šalinimo mašina
TFONSurfacer® TF-RB 2510

Skambinti

Sąlyga: naujas, Gamybos metai: 2025, -TFON – Sistema de Precisión para Redondeo y Acabado de Bordes -Diseñado para ofrecer acabados superficiales superiores y redondeo de bordes precisos en una amplia gama de materiales e industrias, el sistema TFON combina automatización avanzada con configuraciones versátiles para adaptarse exactamente a sus necesidades de producción. Compatibilidad de materiales: Adecuado para aplicaciones en aluminio, acero inoxidable y acero al carbono. Amplio rango de espesores: Procesa materiales de manera eficiente desde 0 hasta 120 mm de espesor. Excelencia en acabado: Especialmente diseñado para proporcionar acabados superficiales de alta calidad que mejoran la estética y la funcionalidad del producto. Versatilidad industrial: Bjdpfxshq A Txs Agiocw Ideal para los sectores de dispositivos médicos, equipamiento para cocinas industriales, piezas automotrices y accesorios metálicos. Precisión en redondeo de bordes: Proporciona un redondeo de bordes preciso con radio 2, mejorando la seguridad y la presentación del producto final. Automatización avanzada: Sistema de control Siemens integrado que garantiza una mayor precisión y fiabilidad operativa. Estaciones de procesamiento independientes: Permiten un procesamiento flexible y eficiente en múltiples etapas, adaptado a flujos de trabajo complejos. Opciones de ancho de mesa: Disponible en anchos de mesa de 650 mm, 1000 mm o 1300 mm para satisfacer diversos requerimientos de producción. Opciones personalizables de transporte: Elija entre sistemas de transporte por vacío, semi-magnéticos o semi-vacío para una manipulación segura y fiable de las piezas. Limpieza de superficie: Elimina eficazmente óxido, óxidos y contaminantes superficiales, preparando las piezas para procesos posteriores. Seguridad mejorada para el operador: La estación de redondeo minimiza el riesgo de cortes y lesiones por bordes afilados. Acabado de alto rendimiento: Equipado con tecnología de abrasivo Scotch para obtener acabados suaves y homogéneos. Mayor vida útil de abrasivos: El sistema de oscilación neumática maximiza la duración de las bandas abrasivas y de los abrasivos tipo Scotch, reduciendo los tiempos de parada. Producción uniforme de radios: Seis ruedas flap aseguran un radio de borde uniforme en cada pieza, garantizando una calidad constante. Diseñado para el rendimiento. Pensado para la seguridad. Construido para la versatilidad industrial. TFON – Perfección superficial, siempre.

Peržiūrėti detales

Mažas skelbimas

Hidraulinis presas Hidralmac 40 T Einständerpresse

Ennepetal

1 181 km

Hidraulinis presas
Hidralmac40 T Einständerpresse

Skambinti

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Bedpfx Ajfxyhfegijcw Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Peržiūrėti detales

Mažas skelbimas

Kraštų užapvalinimo ir nušlifavimo staklės Lissmac SBM-XS-300 G1E1

Strassberg

1 278 km

Kraštų užapvalinimo ir nušlifavimo staklės
LissmacSBM-XS-300 G1E1

Skambinti

Sąlyga: naudotas, Gamybos metai: 2016, Operating hours (machine): 5,320 h Max. feed width: 300 mm Processable sheet thickness: 1–15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Feed speed, stepless: 0–2 m/min Length: 2,600 mm Width: 2,300 mm Height: 1,300 mm Machine weight: 1,900 kg Standard equipment - Equipped with a vacuum table for processing steel, stainless steel, and aluminium for part sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming flipping and reworking of parts is eliminated - By folding away the innovative turning station, parts with an edge length of more than 200 mm can also be processed on one side - High degree of automation enables economical and reliable processing even for large quantities of parts - High and consistent processing quality - Dry processing (no chemical additives necessary as with vibratory finishing) Bjdpfx Aov N I Hlegiscw - Small parts are discharged on the infeed side into a collection box - No additional walking distances for the operator - Energy efficient - The processing principle ensures uniform tool wear across the entire working width - Fast and easy tool changes - Simple and intuitive machine operation - Modern, compact machine design Additional equipment Extraction unit: Lissmac DDE 1500

Peržiūrėti detales

Mažas skelbimas

Uždaras plieninis konteineris Other 40 FT Seecontainer Hellgrau

Hamburg

919 km

Uždaras plieninis konteineris
Other40 FT Seecontainer Hellgrau

2 490 €

fiksuota kaina neįskaitant PVM

Skambinti

Mažas skelbimas

Vamzdžių lenkimo staklės Transfluid DB 2090 DB CNC

Thurgoona

15 287 km

Vamzdžių lenkimo staklės
TransfluidDB 2090 DB CNC

18 999 USD

EXW Pradinė kaina neįskaitant PVM

Skambinti

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: ribota funkcionalumas, Gamybos metai: 2003, veikimo valandos: 24 000 h, Vamzdžio skersmuo (maks.): 100 mm, Vamzdžio ilgis (maks.): 4 100 mm, Lenkimo kampas (maks.): 183 °, lenkimo spindulys (maks.): 300 mm, sienelės storis: 8 mm, Transfluid DB 2090 DB CNC Dornbiegemaschine für Rohre. Exzellente, hochwertige deutsche Maschine, mit komplett überholten Haupt-Hydraulikpumpen und einem komplett generalüberholten Hauptbiegekopf. Es muss lediglich ein neuer Encoder installiert werden und die Maschine ist sofort einsatzbereit. Ausstattungsmerkmale: - Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D - Vorauseilender Dornrückzug - Vollautomatische Einrichtung von Spann- und Nachschubklemmungen - Verstärkter Nachschub für das Biegen von dünnwandigen Rohren mit engem Radius - Langes Maschinenbett mit 4000 mm über Dorn - Umfangreiches Werkzeugsortiment im Wert von über 150.000 AUD ist im Lieferumfang enthalten. Enthaltene Werkzeuge: * 101,6 mm | 152 mm Biegeradius (CLR) * 101,6 mm | 200 mm CLR * 76,2 mm | 114 mm CLR * 76,2 mm | 200 mm CLR * 76,2 mm | 238 mm CLR * 63,5 mm | 96 mm CLR * 57,2 mm | 86 mm CLR Bcjdpfx Agstrd T Teijw * 50,8 mm | 76 mm CLR * 44,5 mm | 67 mm CLR * 40 x 40 mm | 120 mm CLR * 50 x 50 mm | 150 mm CLR * 60,3 mm | 150 mm CLR * 48,3 mm | 120 mm CLR

Peržiūrėti detales

Mažas skelbimas

PRESS STABDYS Dener Abkantpresse XL30220

Dinkelsbühl

1 145 km

PRESS STABDYS
Dener AbkantpresseXL30220

Skambinti

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Press force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/sec R-axis travel 250 mm R-axis speed 100 mm/sec Clear distance between frames 2555 mm Bcjdpfx Asq D Dzljgiew Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 11500 kg (Technical data may vary depending on equipment) Standard equipment: • 3 CNC axes (Y1, Y2, X) • Double-guided press beam, stable and precise • Robust double-guided backgauge • Manually adjustable backgauge fingers, double-guided on linear guide • Movable front arms with height adjustment • Lateral and rear safety covers • Lower die adapter rail 60 mm • Manual upper tool clamping system (Promecam system) • Manual crowning • Foot switch with emergency stop • 380 V, 50-60 Hz, 3 phase • LED lighting Including the following options: • Delem control DA 66T • Fiessler AKAS 2M laser finger guard • FPSC Safety PLC (manual) • X-R axis with servomotors • CNC crowning for high bending precision • 2 additional backgauge fingers - Other bending lengths and thicknesses are available upon request with the appropriate accessories! -

Peržiūrėti detales

Mažas skelbimas

Mierlo

1 279 km

Vamzdžių lenkimo staklės
Herber150RL

Skambinti

Sąlyga: naujas, Capaciteit, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Gewicht ----- 2.200 kg Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Draaibeweging van de buigkop ----- 0,75 sec Standaard componenten voldoen aan VDMA-, ISO- en DIN-normen. OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaaddetector en buispositioneerder via elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie/Collision Control * Verlenging van het bed Bcsdpoga T Exefx Agiow

Peržiūrėti detales

Mažas skelbimas

Stulpinė gręžimo staklės MK4, stovimos gręžimo staklės, stacionarios gręžimo staklės, gręžimo staklė ALZMETALL AB 4 SV

Hessisch Lichtenau

1 040 km

Stulpinė gręžimo staklės MK4, stovimos gręžimo staklės, stacionarios gręžimo staklės, gręžimo staklė
ALZMETALLAB 4 SV

4 000 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: naudotas, Column Drilling Machine ALZMETALL Type AB 4 SV Mach. No. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle taper: MK 4 - short quill Throat depth: 340 mm Quill stroke: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, stepless Motor power: 2.3 and 3.4 kW, pole-switchable Power supply: 380 Volt, 50 Hz - Spindle speed adjustment via 2 motor speeds and stepless variator gearbox - Intermediate gear with 2 speed settings for high torque at low speeds - Spindle On/Off via rotary switch or electric foot switch Bcedpen N Ekcjfx Agijw - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting unit Required space (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg Good condition

Peržiūrėti detales

Mažas skelbimas

Vakuuminis membraninis presas Istra TF-300HV

Egenhofen

1 164 km

Vakuuminis membraninis presas
IstraTF-300HV

18 500 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump delivery rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating capacity: 16 kW Bcsdou Egp Iepfx Agijw Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Peržiūrėti detales

Reklamuokite čia