Lakštinio metalo šalinimo mašina

TFON Surfacer® TF-RB 2510

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Isdpjt Hw Shsfx Ab Njti Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: naujas, Gamybos metai: 2026, Construction size: 6 Nominal heat output: 170 kW -- Complies with BImSchV Stage 2 and CE standards -- Combustion chamber fully lined with fireclay For rooms up to: 4,800 m³ (according to DIN) Itjdpfxedlhdbj Ab Nji Fuel types: firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 40 - 50 kg/h Blower air output (free-blowing): 14,000 m³/h Outlet opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 2,150 kg SPS control cabinet: 380 Volts

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, Vielos skersmens diapazonas: 2,0–10,0 mm Įtraukimo ilgis: neribotas CNC ašių skaičius: 5 Lankstymo kampas: 0,1–240° Atstumimas atgal: maks. 600 mm Svoris: 2 400 kg Itjdpfey Ehrfsx Ab Noi Su nuolydžio formavimo įrenginiu Pilnai su varomu vielos ritės stovu Ritės skersmuo: 1 500 mm Keliamoji galia: 1 500 kg.

Būklė: naujas, Gamybos metai: 2025, keliamoji galia: 1 000 kg, Various heavy-duty welding tables, machined, partially plasma nitrided Itodowu Exzjpfx Ab Nei Sizes: - 1 x 1 meter, €1,500 - 1.2 x 1.2 meters, €1,700 - 1.5 x 1.5 meters, €1,900 - 2 x 1 meter, €2,300 (plasma nitrided: €3,300) - 2.4 x 1.2 meters, €2,900 (plasma nitrided: €3,900)

Būklė: geras (naudotas), Gamybos metai: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel dimensions (thickness 20mm): 2340 x 1240 mm Working chamber height: 60 mm Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Itsdpfxotwba Se Ab Nsi Lower movable platen (closing movement from bottom to top) Press platen opening: 230 mm Side loading width: 1400 mm PVC roll unwinder Double loading table

Būklė: naujas, Gamybos metai: 2025, keliamoji galia: 5 000 kg, Complete set including manual and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Ijdpfxjl Dq U Uo Ab Noti Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.9 rpm CE certified

Gamybos metai: 1990, būklė: naudotas, mašinos/transporto priemonės numeris: 9072492, Nominal power: 100 kVA Outreach: 500 mm Itsdpfxsz H Dyo Ab Noi Electrode arm spacing: 330 - 500 mm electrical connection: 400 V kW Space requirements: 700 x 1420 x 2000 mm Weight: 750 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, mašinos/transporto priemonės numeris: 7771, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, eigos ilgis: 300 mm, darbinis greitis: 75 mm/s, atbulinės eigos greitis: 75 mm/s, stalo aukštis: 900 mm, gerklės gylis: 1 000 mm, bendras plotis: 3 100 mm, bendras svoris: 8 900 kg, X ašies eiga: 1 000 mm, valdiklio modelis: EC20 - graficzne 2D, darbinis plotis: 3 000 mm, lenkimo jėga (didž.): 100 t, galinis atmušas: 1 000 mm, atramdų greitis R ašis: 250 mm/s, Galinio stabdiklio eiga, R ašis: 200 mm, atstumas, kurį nuvažiuoja galinis ribotuvas Z ašis: 1 000 mm, atstumas tarp stulpų: 3 000 mm, valdymo tipas: CNC valdymas, automatizacijos lygis: pusiau automatinis, atgalinio ribotuvo reguliavimas: valdomas CNC, ašių skaičius: 4, pavaros tipas: elektrinis, Įranga: CE žymėjimas, apsaugos šviesos užtvara, avarinis stabdymas, europietiška įrankių tvirtinimo sistema, Servoelektrinė lenkimo staklės SAFANDARLEY, tipas E-Brake 100-3100 NS (100T - 3060 mm) AMADA įrankių sistema Gamintojas Nyderlandai – Lochem Esame oficialus SafanDarley atstovas Lenkijoje. Itjdpfoylt Ukjx Ab Noi - Servoelektrinė pavara - Spaudimo jėga 100 T - Lenkimo ilgis 3060 mm - Eiga 300 mm - CNC valdymas Y1 / Y2 / X / R / Z1 / Z2 ašyse - Galinis atmušas – 4 ašių CNC valdymas: X / R / Z1 / Z2 - Grafinis 2D valdymas – EC20 modelis - Programuojama šviesos užuolaida - AMADA įrankių sistema - WILA įrankių sistema – apatinis prispaudimas, galimi 4V / 2V / 1V / T tipo štampai ant 60 mm pagrindo - Apatinio stalo kompensavimas – "CROWNING"

Būklė: geras (naudotas), CHIRON FZ 08 KS Magnum yra 5 ašių apdirbimo centras, sukurtas tikslumui, aukštam tikslumui ir patikimumui. Judėjimo eigos X450×Y270×Z310 mm; gręžimas 12 mm; sriegimas M8. Įrankių talpykla 24 vietos, didž. įrankio Ø 47 mm (laisva 100 mm), ilgis 160 mm, įrankio svoris 1,2 kg. HSK‑A40 0–36000 aps./min; velenas 7 kW; greitaeigis atstumas 75 m/min; 3×400V 50Hz; suslėgtas oras 6 bar; galia 14 kW (19 kVA); svoris apie 3400 kg; matmenys 2308×1405×2447 mm. Įranga: įrankio lūžio kontrolė, RS232, klimato kontrolės įrenginys elektros spintai, būsenos signalinė lemputė. Tinka tiksliai tolerancijai automobilių, aviacijos, medicinos technikos, laikrodžių gamyboje. Itodpfoyxn Hcox Ab Nji

Būklė: naudotas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact processing center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large workpieces. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belt grinder with abrasive belt length: 2620 mm Standard equipped with vacuum holding system, optionally with magnetic holding system Itsdpfx Absnah Tds Nji The use of 2620 mm long abrasive belts ensures a consistently smooth surface and reduces consumable costs due to the longer belt service life. Due to the modular design of the machine, it is possible to offer the optimal configuration for the customer’s processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal processing center for deburring and finishing operations. Please contact us for further information and images via email at mail(at) or