Perdavimo mašinos pirkti naudotą (51)

Būklė: naudotas, 2x Pfiffner RT 100 Description: Gjdpsw Si T Asfx Agdotw Rotary Index Table / Spindles: Clamping stations: 12 motor spindles Drive: Torque drive, water-cooled Measuring system: Direct Index time: 1.5 seconds Spindles: Water-cooled motor spindles C-axes: 0.001°, hydraulic clamping Speed: 5,500 rpm Power: 11 kW Clamping device: Chuck Base modules: Technology: Positioning module, 3-axis X-axis: 50 mm Y-axis: 100 mm Z-axis: 100 mm Measuring systems: Direct on all axes Coolant supply: Integrated Workpiece size (max.): 100 x 100 x 100 mm Station 1: Horizontal: Raw part feed (indexing conveyor + Stäubli robot) Vertical: Raw part measurement Station 2: Horizontal: 4-position turret, non-driven Vertical: Re-clamping error measurement (C-axis zeroing) Station 3: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 4: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 5: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: 6-position turret with WAN, 10,000 rpm Station 6: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 7: Horizontal: Not equipped Vertical: 6-position turret with WAN, 10,000 rpm Station 8: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: Not equipped Station 9: Horizontal: 4-position turret, non-driven Vertical: Not equipped Station 10: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: Not equipped Station 11: Horizontal: 6-position turret with WAN, 10,000 rpm Vertical: 6-position turret with WAN, 10,000 rpm Station 12: Horizontal: Loading/unloading device with double swing gripper + unloading conveyor Features / Accessories: Chip management: Chip conveyor High-pressure unit: 50 bar Tool monitoring: ARTIS breakage control Raw material feed: Conveyor belt with robot Finished part discharge: Unloading conveyor with 3-way separator Oil mist separator: Electrostatic filter Fire extinguishing system: Kraft und Bauer Part marking: Laser Parts cleaning: HESO cleaning system

Būklė: naudotas, Description: General: Year of manufacture: 2018 Control: Fanuc Machining stations: 5 units Loading station: 1 unit Travel range: X-axis: 450 mm Y-axis: 500 mm Z-axis: 450 mm Rapid traverse X/Y/Z: 50 m/min Turret: Gsdpfx Aevr Az Njgdotw Number of positions: 8 Spindle speed: 13,300 rpm Torque: 58 Nm Tool holder: HSK 63 C Workpiece/fixture: Maximum dimensions: 350 x 350 x 350 mm Maximum permissible mass: 250 kg Media feed: 6 units NC rotary swiveling table: A-axis: +/- 150° B-axis: 360° Maximum load: 250 kg Table diameter: 320 mm Equipment / Accessories: Loading/unloading: Fanuc Robot M20i-A Chip disposal: 2x chip conveyors Coolant supply: high-pressure system, 20 bar Position measuring systems: Direct in all axes

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, EUBAMA S6, year 2010. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 450 mm Maximum output (cycles/minute): 40 Hydraulic clamping system Machine control: CNC Siemens 840 D Number of machining units: 15 PRA 52 P IEMCA bar feeder Magazine loading capacity: 4 meters KNOLL chip conveyor KNOLL coolant reservoir The machine is in working condition. Godpfx Aov Ef N Aegdetw

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: K.966610 M, bendras aukštis: 3 056 mm, bendras ilgis: 4 825 mm, bendras plotis: 3 500 mm, Siūlome labai gerai išsilaikiusią Mikron Multifactor 60.015 modelio diskinių skydinių automatinę staklę. 1997 metų staklės yra puikiai prižiūrėtos ir paruoštos darbui. Tekintinių detalių apdirbimas galimas iki 15 stočių (maks. 60 ciklų per minutę). Galimas tiek strypinės, tiek žiedinės medžiagos padavimas. Gedox Ura Ejpfx Agdotw Jei turite klausimų ar reikia daugiau informacijos, susisiekite su mumis!

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Elastingumas: Mūsų Rotaflex mašinos išsiskiria išskirtiniu lankstumu, pranokstančiu konkurentus. Šios mašinos yra universalios ir gali atlikti įvairias operacijas, tokias kaip tekinimas, frezavimas, sriegimas ir griovelių darymas. Kiekviena stotis veikia nepriklausomai ir gali turėti iki 5 ašių, užtikrindama efektyvų ir tikslų apdirbimą. Pažangios tekinimo galimybės: Rotaflex mašinos sukurtos tikriems tekinimo darbams — jos turi griebtuvus, galinčius pozicionuotis B ašyje ir vienu metu atlikti tekinimą iki 6500 aps./min. Prašome peržiūrėti demonstracinius vaizdo įrašus žemiau: Gtjdpfx Agsyg Nwdodew Inovatyvūs Plug-and-Run griebtuvai: Mūsų Plug-and-Run griebtuvai leidžia griebtuvą pakeisti per kelias sekundes, todėl darbo perjungimas vyksta greitai ir efektyviai. Ši technologija išskiria Technica iš kitų rotacinio perdavimo staklių gamintojų. Kodėl verta rinktis Technica Rotaflex mašinas: Technica mašinos pasižymi neprilygstamu universalumu ir tikslumu, todėl puikiai tinka didelės apimties gamybai, kur reikalingi kokybiški ir prisitaikantys įrenginiai. Derinant šveicarišką inžinerijos tikslumą ir daugiafunkciškumą, mūsų įranga užtikrina patikimą ir efektyvų veikimą.

Būklė: naudotas, Gamybos metai: 2011, Funkcionalumas: neveikiantis, bendras aukštis: 2 500 mm, bendras ilgis: 12 000 mm, bendras plotis: 4 mm, galia: 65 kW (88,38 AG), bendras svoris: 10 305 kg, Strypo skersmuo (maks.): 110 mm, Vamzdžio skersmuo (maks.): 110 mm, tekėjimo ilgis: 350 mm, ruošinio skersmuo (maks.): 110 mm, Įranga: dokumentacija / vadovas, We offer this used Sinico SIN-O-MATIC TOP 2000 saw and end finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 kW max NUM brand CNC control Automatic machine for cutting to length and end machining. Transfer machine with horizontal axis table for cutting and end processing of tubes and bars. Flexible and highly adaptable CNC machine. It guarantees high productivity of up to 2,500 parts/hour and is designed for machining small to large workpieces: bar diameter up to 110 mm, finished part length up to 350 mm. Maximum versatility in processing tubes and bars. It is capable of performing the following operations: Beveling – Face milling – Thread cutting – Forming – Marking A variety of spare parts, clamping jaws, and accessories are included. The machine is still assembled but currently has a fault and therefore cannot be demonstrated. If you have any questions or require further information, feel free to send us a message or give us a call. Gtsdpfjycr Nhsx Agdew

Būklė: naudotas, Technica prekės ženklo, Stemoflex modelio rotacinė perdavimo staklė Gtedpfx Ajydcm Hsgdow

Būklė: naudotas, Gamybos metai: 2013, Article: Rotary Transfer Machine Manufacturer: Pfiffner Model: Hydromat HB 32-45/16 CNC Year of manufacture: 2013 Electro-hydraulic control, fully automatic Offer extract: - Coolant system with chip conveyor and Knoll vacuum rotary filter - High-pressure pump 50 bar - Second coolant ring - Water cooler type 1600 - Collets type B32-45 UP - Control unit: Siemens Sinumerik 840D – CNC / S7-PLC incl. modem (for remote service) Gtodpfx Ajruvaqjgdjw - 1 bar feeder type IEMCA: bundle loader (year 2011) - 1 cut-off unit: saw blade D250mm - 2 feed units VE 26/80-HSK: spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32 - 2 vertical slides 26/80 with 36° angle position - 2 drilling heads 26/80-HSK: HSK 32 - 1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40 - 4 feed units VE 36/100-HSK with internal cooling: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply - 6 drilling heads 36/1000-HSK: HSK 40 - 2 CNC X-Y-Z rotary devices outside the collet plate: pick-up unit NC 26/100; 2 deburring spindles - 1 CNC horizontal cross slide 26100-HSK: X/Y travel - 1 CNC feed unit VE 36/100-HSK with internal cooling: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply - 2 CNC turning units 50/100-PSK: with facing slide head ES-PDK-12 (slide with 2 tool holders); Z-axis 100mm; X-axis 12mm; n max. 5000 rpm; 4kW - 1 turning unit WDE 30/60 - 1 turning tube with push-in rod - 3 chip breaker valves SBV-100 - Tool monitoring Please contact us for further information and images via mail(at) or

Gamybos metai: 1988, būklė: naudotas, Eubama S5 Rundtaktmaschine Seriennummer: 5531 Baujahr: 1988 Top-Zustand Gsdpedg Da Ijfx Agdetw Seit 15 Jahren unbenutzt

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Hydromat HB32/16 CNC, transferinė staklė su 8x griebtuvais ir 8x įvorės laikikliais, Bosch MTX valdymas, sukomplektuota su 16 apdirbimo agregatų, iš kurių 5x CNC-50/100 tekinimo stotys ir 2x CNC 3 ašių frezavimo agregatai, Stäubli lankstus robotas, 4,2 m ilgio padavimo magazinas, KNOLL aušinimo sistema su VRF / aukšto ir žemo slėgio siurbliais. Gtodpfjxz Eavjx Agdew 2020 metais mašina buvo pilnai renovuota HME AG ir aprūpinta Bosch MTX valdymu.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, A gép működés közben megtekinthető. A gép szétszerelése, mozgatása és szállítása teljes mértékben a vevő felelőssége. Paritás: EXW Székesfehérvár Gtjdpeidqygsfx Agdew Riello VFX 300 – 6/4 – 0/ - V Vertiflex transzfergép Riello VFX 300 – 6/4 – 0/ - V Vertiflex transzfergép forgóasztallal, 6 állomással, 5 darab, fejenként 6 szerszámot tartalmazó multifunkciós fejjel, 1 munkavégző állomással, 2 beállító állomással, hűtőberendezéssel, forgácskihordóval, hűtőfolyadék-kezelő rendszerrel és szerszámzattal.

Būklė: naudotas, MIKRON Multistar CX-24 / 1500 yra didelio tikslumo apvalaus ciklo (žiedinė) transferinė staklė, sukurta maksimaliam tikslumui ir patikimumui. Pajėgumai: 24 stotys; iki 23 viršutinių, 22 apatinių, 22 šoninių apdirbimo įrankių; ruošinio skersmuo iki 24 mm; gamybos našumas 70 vnt./min (daugiapakopis 280 vnt./min). Pagrindiniai duomenys: veleno apsisukimai 500–32 000 aps./min; maitinimas 50 Hz, 3x400 V; suspausto oro slėgis 6 bar; mašinos svoris apie 3500 kg; valdymo spintos svoris apie 1200 kg. Pasiekia griežtus leistinų nuokrypių ribas; tipinės sritys: automobilių, aviacijos, medicinos, laikrodžių pramonė ir įrankių gamyba. Gtsdpfxexx U A Us Agdow

Būklė: naudotas, Gamybos metai: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General / Technical Data: Gjdsw E Hpvopfx Agdjtw 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces, featuring manual collet clamping. Drilling Units: 7 units Station 1 – Loading and Unloading Station 2 – Horizontal drilling unit, Type: BE VK, Power: 2.2/3 kW, Holder: sleeve Ø 36 mm Station 3 – Vertical drilling unit, Type: BE VK, Holder for collets Station 4 – Horizontal drilling unit, Type: BE VK, Holder: sleeve Ø 36 mm Station 5 – Vertical spindle unit, Type: BE VK, Holder: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, Type: BE VK with additional guide, Holder: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, Type: BE VK, Power: 2.2/3 kW, Holder: sleeve Ø 36 mm Station 8 – Vertical spindle unit, Type: BE VK, Power: 2.2/3 kW, Holder: sleeve Ø 28 mm Drilling units feed: mechanical feed via quill Indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manually actuated collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special Features: • Designed for large-scale series production • Equipped with a robust cast machine table, chip discharge to the rear, and a separate large coolant tank • Extensive range of clamping and auxiliary tools • Mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very stable machine bed; ideally suited for the rebuild of a special-purpose machine as well

Būklė: nepatikrintas (naudotas), Gamybos metai: 1969, Manufacturer: Steinel Model: 6 Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK with additional guide; mounting: collet Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed of drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanically indexed to 8 positions, Ø 400 mm Gtedew H I R Rjpfx Agdsw Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (w x d x h): approx. Ø 1,800 mm x h = 2,200 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • The machine is designed for use in large-scale series production • Features a robust cast iron machine table with chip removal to the rear and a separate large coolant tank (drain at the rear) • Safety light curtain by Sick • Extensive range of accessories, spare parts, spindle units, and rotary indexing table included • Equipped with a 6-station rotary indexing table • Heavy-duty cast iron machine table, ideal for reconstructing a special-purpose machine

Būklė: nepatikrintas (naudotas), Gamybos metai: 1967, Manufacturer: Steinel Model: 5 Station BE 10 VK Year of Manufacture: 1967 Weight: approx. 3,000 kg General Information / Technical Data: 5-station rotary indexing special drilling machine for horizontal drilling operations with multi-spindle heads Drilling units: 4 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit type: BE 10 VK Station 3 – Horizontal drilling unit type: BE 10 VK Gedpfx Aew H Rh Sogdstw Station 4 – Horizontal drilling unit type: BE 10 VK Station 5 – Horizontal drilling unit type: BE 10 VK Feed for drilling units: mechanical feed via quill Drill heads: Multi-spindle drilling units Rotary table: mechanically indexed, 5 positions, Ø 400 mm Workpiece clamping: hydraulic, via centric expanding mandrel, workpiece diameter approx. 80 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V 50 Hz Accessories / Special Features: • The machine is designed for large-scale production • The machine features a robust cast iron machine table with side chip removal and separate coolant reservoir • Automatic safety door • The machine is equipped with a 5-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding a special purpose machine • Machine suitable for "rebuilding"

Būklė: naudotas, Gamybos metai: 1963, Funkcionalumas: nepatikrintas, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary index special drilling machine for vertical and horizontal drilling operations on small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread cutting unit Feed of the drilling units: mechanical feed via quill Drilling heads: single-spindle Tool diameter: approx. Ø3mm to Ø8mm Workpiece clamping: manually operated by collet Machine dimensions (w x d x h): approx. Ø 2,000 mm x h = 2,200 mm Gtedpfx Agswyn S Uedow Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Features: • The machine is designed for use in large-scale series production • The machine features a stable machine table with chip conveyor to the underside of the table center and a separate large coolant tank • Extensive range of clamping and auxiliary equipment • The machine includes a 6-station rotary indexing table

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, 3 Rotary Transfer Machines + 3 Interlinking Robots OVERVIEW - Bar feeder - Rotary transfer machine 1 (Sawing + Machining, Clamping 1) - Rotary transfer machine 2 (Machining, Clamping 2) - Placement onto conveyor belt - Marking - Deburring system - Stacking cell with rejection chute for measurement parts TECHNICAL DETAILS Process Description Step 1: Manual loading of bars onto the bar magazine Step 2: Automatic feeding of the bar and cut-off of the workpiece Step 3: Robot picks up the workpiece from the saw clamp and transfers it to the fixture of rotary transfer machine 1 (station 1) Rotary Transfer Machine 1 (Machining Clamping 1) Station 2: Profile milling left and right Station 3: Profile milling top Station 4: Slot milling (2x), drilling Ø 6.5 mm (4x) Station 5: Drilling Ø 5 mm (4x), tapping M6 (2x), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2x) Station 6: Transfer to second system Rotary Transfer Machine 2 (Machining Clamping 2) Station 1: Robot picks up part from station 6 in system 1 and loads it into the fixture of the second rotary transfer machine Station 2: Profile milling bottom Station 3: Slot milling (2x) Station 4: Profile milling bottom (2x) Station 1 (again): Unloading onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar Feeder Bar magazine: for 2,000 - 6,000 mm bar material Magazine width: approx. 2,100 mm Loading height: approx. 1,200 mm Part buffer: 10 bars Rotary Transfer Machine 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Spindle units: 5 Tool turret: 1 Feeds: 14+1+5 NC axes Rotary Transfer Machine 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Spindle units: 4 Feeds: 9+1+3 NC axes Discharge Conveyor Chain conveyor: Workpiece carriers made of plastic Incline: approx. 3° Length: 8,000 mm Part detection: at loading station / marking station / unloading station Rotary Transfer Machine 3 - SEMA REA 30/5-6S-NC-R Number of deburring positions: 5 Control: Siemens Simatic S7 Gjdpfxswqf R Ns Agdstw Feeding station: 1 Machining units: 6 Extension of deburring system: Blowing off workpieces Robot: for loading and unloading the deburring system, as well as stacking with SPC drawer MACHINE DETAILS Noise level: 80 dBA Connection: 400 V, 50 Hz Model RTA55/6-SA-NC-R Rated power: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Model RTA55/4-NC-A Rated power: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Rated power: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HB32-571, Įranga: dokumentacija / vadovas, drožlių transporteris, TECHNICAL DETAILS Number of CNC units: 8 Control system: Siemens Chip conveyor: Knoll Filtration system: Vacuum rotary filter High-pressure system: Combiloop Loading magazine: 3 m UNIT ALLOCATION PLAN Station 1: Sawing Station 2: Hydraulic drilling Station 3 H: CNC turning Station 3 V: Hydraulic drilling Station 4: CNC turning Station 5: CNC turning Station 6 H: Hydraulic drilling Station 6 V: CNC turning Station 7: No unit Station 8: CNC turning Station 9: CNC turning Station 10: Hydraulic drilling Station 11: Hydraulic drilling Gjdpfowkd A Djx Agdstw Station 12: CNC turning Station 13: CNC turning Station 14: Milling Station 15: Hydraulic drilling Station 16: Hydraulic drilling EQUIPMENT - Platform - Declaration of conformity

Būklė: naudotas, Gamybos metai: 2010, X-axis travel 450 mm Y-axis travel 400 mm Z-axis travel 320 mm Tool holder HSK 63 Spindle speed 0 - 10,000 rpm Rapid traverse 30 m/min Control system GE FANUC Series 16i System for machining fittings, valve bodies, fittings, etc. Consisting of: 1 used flexible manufacturing cell (transfer machine) by RIELLO, type VERTIFLEX VFX 450-2/1-0/1-V, year 2010, with 2 three-axis machining modules, each with 8-position tool turret, Travel ranges Module 1: X1/Y1/Z1 = 450/400/320 mm, Travel ranges Module 2: X2/Y2/Z2 = 450/400/320 mm, Each with HSK 63 taper, Rotary table with 2 integrated workpiece holders, each 400 mm ø (B-axis per workpiece holder 360 x 1°), high-pressure internal coolant Accessories: chip conveyor, cooling system Connected via ABB handling robot with 1 used flexible manufacturing cell (transfer machine) by RIELLO, type VERTIFLEX VFX 450-2/2-0/1-V, year 2003, with 3 three-axis machining modules, each with 8-position tool turret, Travel ranges Module 1: X1/Y1/Z1 = 450/400/320 mm, Travel ranges Module 2: X2/Y2/Z2 = 450/400/320 mm, Travel ranges Module 3: X3/Y3/Z3 = 450/400/320 mm, Each with HSK 63 taper, Rotary table with 2 integrated workpiece holders, each 400 mm ø (B-axis per workpiece holder 360 x 1°), high-pressure internal coolant Accessories: chip conveyor, cooling system Gtjdjtqqqmopfx Agdsw youtu.be/vo4ZI_dvEZk

Būklė: naudotas, Gamybos metai: 2001, Stations: 10 / 22 Tool holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total power requirement: approx. 112 kW = Transfer machine Gedpfx Agstqqlqodstw Indexing drum with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Tapping: 8 units; Drilling & Counterboring: 5 units; Drilling, Counterboring & Tapping: 2 units), Each machining unit equipped with SK 40 tool holder, Motor power per unit 4.0 to 4.5 kW, SIEMENS SIMATIC OP 3 control, ABB loading robot Accessories: Collet chuck (without jaws), chip conveyor, coolant system

Būklė: naudotas, Gamybos metai: 1997, Stations: 10 / 22 Tool Holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total Power Requirement: approx. 130 kW = Transfer Machine Rotary indexing drum with 10 workpiece stations, 22 machining units (10 drilling units, 5 drilling and tapping units, 3 drilling and countersinking units, 1 drilling, countersinking and tapping unit, 3 tapping units), Each unit equipped with SK 40 tool holder, motor power per unit between 4.5 and 5.5 kW, Control system: SIEMENS SIMATIC OP 3, Loading robot: ABB Gjdpfxjtqqlro Agdetw Accessories: chuck (without jaws), chip conveyor, coolant system

Būklė: labai geros būklės (naudotas), Gamybos metai: 1996, NEW ARRIVAL Godpfxjt I T N Es Agdetw +++++ 1 used, very well-maintained transfer machine / rotary indexing table machine MIKRON MULTISTAR CX 24 The machine can be inspected under power. Part feeding is not an issue. Equipped with MITSUBISHI AACPU-S1 control – Year of manufacture: 1996 – Detailed technical data as per attachment – The machine can be inspected while cutting. Modification – installation – commissioning – application can be offered. Pricing: ex location, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Technical data non-binding – errors excepted. Payment: As customary for used machinery, strictly net payment before collection.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 110 mm, Y ašies eiga: 150 mm, Z ašies eigos atstumas: 150 mm, ruošinio ilgis (maks.): 40 mm, ruošinio plotis (maks.): 80 mm, The rotary transfer machine is comprehensively equipped; the new price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 110 mm Travel distance Y-axis: 150 mm Travel distance Z-axis: 150 mm Work spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: Max. 24 Number of tools on the machine: Max. 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical data Voltage, phase frequency: 400 V / 50 Hz Weight & transport dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Rack for oil tubing, extraction system and piping Loading systems Vibratory feeders Cabinets / side panels / upper channel / top cabinet sections Platform Polycarbonate partitions Fire protection system with control console Gedpfx Agswy I Tlodstw Further information regarding the transport dimensions can be found in the attached packing list.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8450-02-001, sukamosios stalo skersmuo: 4 000 mm, Įranga: drožlių transporteris, TECHNICAL DETAILS Rotary Table Diameter: 4,000 mm Machining Stations: 12 Axis Configuration: 4 × 3 axes, 8 × 2 axes Gsdpfjxur Rujx Agdstw Clamping Jaws: 12 units for tool holders Drilling Units: NC-controlled Accessory Systems Chip Conveyor: Knoll, Type 500K-1/500, Year 2001 Coolant System: available Filtration System: available Measuring Device: integrated MACHINE DETAILS Identification Number: 8450-02-001 Customs Tariff Number: 84573010 Weight Machine: 6,000 kg Control Cabinet: 800 kg Coolant System: 600 kg Dimensions Working Height: 1,170 mm Machine Height: 2,220 mm Footprint: 5,231 × 4,540 mm EQUIPMENT FEATURES - Rotary indexing table with large 4,000 mm diameter for extensive machining operations - 12 NC drilling units equipped with 12 clamping jaws - Integrated chip conveyor type Knoll 500K-1/500 - Complete system with filtration and coolant equipment - Measuring system and automatic loading/unloading for fully automated operations

Gamybos metai: 2006, būklė: labai geros būklės (naudotas), SIEMENS 840D machine control, language English, coolant system with vacuum rotary filter, without loading magazine (retrofit possible), double production with loading at station 1 + 2 (can be modified), 4x CNC 50/100 turning stations, 4x 26/80 feed units Gjdjppt Nvepfx Agdstw