Perdavimo mašina

Steinel

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Atstumas tarp centrų: 1 000 mm Sūkio skersmuo: 410 mm Veleno anga: 54 mm Pinolės tvirtinimas: MK 4 Staklių svoris: apie 2,1 t Komplekte trijų žiuptų griebtuvai Komplekte Multifix greito keitimo įrankių laikiklis Lhodszd S Daopfx Akvjh Komplekte sukamieji centrai

Būklė: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 100 000 h, slėgis (min.): 10 juosta, slėgis (maks.): 10 juosta, aušinimo tipas: vanduo, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally pre-piped and pre-wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigeration dryer (WorkPlace Air System™). Ljdpfou Rptysx Akvshh Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20°C Relative humidity 0% Usable flow rate at the outlet of the compact unit at operating overpressure of 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Motor rated power: 18 kW Motor rated speed: 4867 rpm Shaft power requirement at maximum operating pressure: 24 kW Shaft power requirement in idle mode: 5.6 kW Compressed air temperature after dryer: 23°C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Būklė: geras (naudotas), 2 kolonų štampavimo įrankis, atskyrimo įrankis, štampavimo įrankis, štampas, štampavimo matrica, štampo kaištis, kolonų rėmas Lhjdpfxjzcwlnj Akvsh - Gamintojas: Steinel, 2 kolonų štampavimo įrankis - Tvirtinimas: Ø 40 mm - Tarpas tarp kolonų: 165 mm - Štampavimo matmenys: 1x Ø7 mm / 1x spindulys 13 mm, žr. nuotraukas su matmenimis - Matmenys: 295/235/A250 mm - Svoris: 19 kg

Būklė: naudotas, Horizontal machining center with dual pallet changer STEINEL Type BFZ 5 featuring SIEMENS Sinumerik 810 M CNC control Serial No. 34 Year of manufacture: 1988 Travel distances: X: 500 mm, Y: 400 mm, Z: 320 mm Clamping/table area: 500 x 400 mm Tool holder: ISO 40 Spindle speed: up to 6300 rpm, infinitely variable Main spindle drive: 12 kW Power supply: 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Pallet changer with 2 stations - Data transfer interface Lhsdpfx Aksutuyiovsh - Coolant system with chip conveyor Required floor space (L x W x H): 4100 x 2500 x 2650 mm Weight: approx. 8 tons In good condition Transport dimensions: Machine (L x W x H): 3200 x 2500 x 2650 mm, approx. 7.5 tons Chip conveyor (L x W x H): 3500 x 1100 x 2100 mm, approx. 600 kg

Būklė: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC erosion machine with submerged machining; X/Y/Z travels: 550/370/410 mm; year of manufacture: 2004, CE compliant, equipped with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm Lhjdpsxd R Hmjfx Akvsh - Maximum workpiece weight: 1,000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Axis travels X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse (X, Y, Z axes): 900 mm/min - Rapid traverse (U, V axes): 450 mm/min - Work table dimensions (L x W): 780 x 600 mm - Workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1,000 kg - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Power supply: 400 V; 50/60 Hz - Total power required: 13 kW - Total machine weight: 3,100 kg

Būklė: geras (naudotas), 1 x drilling and tapping machine Steinel GT.6.52 Technical data: Speeds: 500/630/1000/1250 rpm Lsdpfx Akjma Efysvjhh Capacity in steel: M6 Max. chuck clamping diameter: 10 mm The machine can be inspected under power.

Būklė: naudotas, Gamybos metai: 1985, x-axis travel: 560 mm y-axis travel: 450 mm z-axis travel: 450 mm Rotary table diameter: 270 mm Rotary table swiveling range: 0 - 24° Spindle taper: ISO 30 Spindle speeds: 31.5 - 7100 rpm Feed rate: 1 - 10,000 mm/min Control: SINUMERIK System 8 Number of tool magazine stations: 40 Max. tool length: 255 mm Max. tool weight: 6 kg Total power requirement: 32 kW Machine weight approx.: 11.6 t = 5-axis machining center Lhsdjtycfujpfx Akvsh Accessories: various tool holders, coolant system

Būklė: naudotas, FANUC Robocut C 600 iA yra vielinė erozijos staklė, sukurta preciziškumui, aukštam tikslumui ir patikimumui. Stalas 600×400 mm; maksimalus ruošinio dydis 1050×820×300 mm; stalo apkrova 1000 kg; eigos X600 Y400 Z310 U200 V200; viela nuo 0,1 mm. Prisijungimas 50 Hz 3x 400 V; bendra galia 11 kVA; svoris apie 1500 kg; matmenys 1800×1600×2000 mm. Priedai: šviestuvas, automatinis vielos įvėrimas, Daikin skysčio aušinimas, automatinės stumdomos durys, X,Y stiklo liniuotės, rotacinis Hirschmann F velenas. Pasiekia griežtas tolerancijas; sritys: automobilių, laikrodžių, įrankių gamyba, aviacijos, medicinos technologijos. Lodpeyxprtofx Akvehh

Būklė: geras (naudotas), Gamybos metai: 1986, mašinos/transporto priemonės numeris: 1111, Pasiūlymas 24093 Techniniai duomenys: Ledpfxey Ibg Ij Akvohh - Maks. kniedės kotelio skersmuo: 6 mm - Pado spaudimo jėga: 1200 daN - Kniedijimo laiko nustatymas: 0–10 sek. - Išsikišimas: 140 mm - Stalo dydis: 250 x 175 mm - Montavimo aukštis / stalo aukštis reguliuojamas - Eigos ilgis: 40 mm - Darbinis slėgis: 5 bar - Slėgio ribotuvas - Pavara: 400 V / 0,6 / 0,75 kW - Užimama vieta: apie Pl 500 x A 1650 x G 650 mm - Svoris: apie 480 kg

Būklė: naudotas, Gamybos metai: 1963, Funkcionalumas: nepatikrintas, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary index special drilling machine for vertical and horizontal drilling operations on small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread cutting unit Feed of the drilling units: mechanical feed via quill Drilling heads: single-spindle Tool diameter: approx. Ø3mm to Ø8mm Workpiece clamping: manually operated by collet Machine dimensions (w x d x h): approx. Ø 2,000 mm x h = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Features: Lhedpfowyn S Uox Akvjh • The machine is designed for use in large-scale series production • The machine features a stable machine table with chip conveyor to the underside of the table center and a separate large coolant tank • Extensive range of clamping and auxiliary equipment • The machine includes a 6-station rotary indexing table

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, CNC tekinimo staklės GILDEMEISTER NEF 400 Pagaminimo metai: 2005 Siemens 840 D Techniniai duomenys: Tekinimo ilgis: 650 mm Apsisukimų skersmuo virš lovos: 400 mm Apsisukimų skersmuo virš planšetinės: 270 mm Veleno skylė: 65 mm X eiga: 220 mm Z eiga: 700 mm Maksimali pagrindinio veleno sūkių dažnis: 4.000 aps./min. 8 pozicijų įrankių revolveris Staklių svoris: apie 3.175 kg Lodpfx Ajyin Imekvshh

Būklė: nepatikrintas (naudotas), Gamybos metai: 1969, Manufacturer: Steinel Lhsdpfew H I R Rsx Akvsh Model: 6 Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK with additional guide; mounting: collet Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed of drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanically indexed to 8 positions, Ø 400 mm Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (w x d x h): approx. Ø 1,800 mm x h = 2,200 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • The machine is designed for use in large-scale series production • Features a robust cast iron machine table with chip removal to the rear and a separate large coolant tank (drain at the rear) • Safety light curtain by Sick • Extensive range of accessories, spare parts, spindle units, and rotary indexing table included • Equipped with a 6-station rotary indexing table • Heavy-duty cast iron machine table, ideal for reconstructing a special-purpose machine

Būklė: naudotas, Gamybos metai: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces, featuring manual collet clamping. Drilling Units: 7 units Station 1 – Loading and Unloading Station 2 – Horizontal drilling unit, Type: BE VK, Power: 2.2/3 kW, Holder: sleeve Ø 36 mm Station 3 – Vertical drilling unit, Type: BE VK, Holder for collets Station 4 – Horizontal drilling unit, Type: BE VK, Holder: sleeve Ø 36 mm Station 5 – Vertical spindle unit, Type: BE VK, Holder: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, Type: BE VK with additional guide, Holder: sleeve Ø 28 mm Lhjdpfsw E Hpvex Akvoh Station 7 – Horizontal drilling unit, Type: BE VK, Power: 2.2/3 kW, Holder: sleeve Ø 36 mm Station 8 – Vertical spindle unit, Type: BE VK, Power: 2.2/3 kW, Holder: sleeve Ø 28 mm Drilling units feed: mechanical feed via quill Indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manually actuated collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special Features: • Designed for large-scale series production • Equipped with a robust cast machine table, chip discharge to the rear, and a separate large coolant tank • Extensive range of clamping and auxiliary tools • Mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very stable machine bed; ideally suited for the rebuild of a special-purpose machine as well

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: XXX,

Būklė: naudotas, Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 500 mm, veleno greitis (maks.): 2 500 aps./min, ašies variklio galia: 37 W, sukimo momentas: 1 450 Nm, įvorės išorinis skersmuo: 315 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Staklio Voest Alpine Steinel tekinimo staklės WNC 500 S x 1000 Tekinimo skersmuo: 500 mm Tekinimo ilgis: 1000 mm Valdymas: Sinumerik 810 T-GA 2 2 pakopų pavara i = 4 Galia: 37 kW prie 100% darbo ciklo Maksimalus tekinimo sukimo momentas: 1450 Nm Rankinis užveržimas ir sujungimas viršutiniam centrui Maks. tekinimo greitis: 2500 aps./min Elektroninis rankinis ratas Frezavimo apdirbimui: hidrauliškai įstatomas servovariklis su 720 Nm ir maks. 18,5 aps./min. 12 vietų diskinių revolverių galvutė su varomais įrankiais, maks. 3000 aps./min. prie 4 kW Įrankių laikiklis: VDI 40 Lhedpfx Aoydfy Nskvoh Daugybė VDI 40 įrankių laikiklių tiek vidinei, tiek išorinei apdirbimui bei varomiems įrankiams, Įskaitant keletą įrankių, pvz., vidaus tekinimo peiliai, kitaip be įrankių!