Wema pirkti naudotą (20)

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 053-497, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, CNC Machining Center Manufacturer: Werkzeugmaschinenfabrik Vogtland GmbH Type: HPC FLEX-V100 (special-purpose machine) Year of manufacture: 2005 Serial number: 053-497 CNC special-purpose machine model HPC FLEX-V100 from Werkzeugmaschinenfabrik Vogtland. The system is designed as a single-spindle machining module with horizontal and vertical machining capabilities and an automatic pallet changer system, specifically planned for the machining of rolling bearing cages. The machining unit is based on a combination of two NC rotary tables (A and B axes), allowing access to various machining positions and division angles. With this 2-axis combination, a pallet with clamping fixture is pivoted from the loading position into the machining position. Loading is performed via an automatic pallet changer with a separate pallet loading station. Direct loading inside the work area is not foreseen by design. The system is equipped with extensive peripherals, including a coolant system with high-pressure unit, chip conveyor, hydraulic power unit, recooling system, central lubrication, and oil/mist extraction system. Machine control is handled by a Siemens SINUMERIK 840D. Used industrial special-purpose machine from production environment. The system is fully assembled and equipped with comprehensive peripherals. Visually, the machine exhibits normal signs of use consistent with age and previous operation, particularly in the working area. Inspection by appointment is possible. Dismantling, loading, and transport are to be arranged by the buyer. Machine Specifications • Installation dimensions (L × W × H): approx. 14,900 × 8,100 × 4,800 mm • Total weight: approx. 85 t • Max. transport unit: approx. 18 t • Number of machining stations: 1 • Machine capacity: approx. 1 workpiece/hour (depending on type) Machining • Workpieces: various rolling bearing cages • Material: CuZn40Pb2 • Operations: drilling, tapping, milling, facing, brushing Workpiece Clamping • Manufacturer: RAKO GmbH • Design: 12-jaw chuck • Actuation: manual with screwdriver • Pallet size: 1250 × 1250 mm Controls and Drives • CNC control: Siemens SINUMERIK 840D • System control: Siemens S7 • NC axis drives: Siemens 1FT6 • Main spindle: KESSLER DMS132.AL.4.FFS • Drive controllers: Siemens SIMODRIVE 611D Electrical Data Ihodpfxsyt I I Ue Agfow • Operating voltage: 400 V • Frequency: 50 Hz • Rated current: 300 A • Connected load: 150 kW • Control voltage: 24 V DC Hydraulic System • Manufacturer: Parker Hannifin GmbH • Hydraulic oil: HLP 46 • Tank capacity: 90 l • Max. pressure: 130 bar Pneumatics • Operating pressure: 6 ± 0.6 bar • Air consumption: approx. 300 m³/h Central Lubrication • Manufacturer: Willy Vogel AG • Type: MFE5-KW6-S1+299 • Lubricant: CGLP 220 • Lubrication interval: every 10 min • Tank capacity: 6 l Coolant System • Manufacturer: MANN + HUMMEL • Filtration system: K90 L T63-PF750D-T-ND-SSP • Pump output: 500 l/min at 4.4 bar (10 µm filter) High-Pressure System • Manufacturer: MANN + HUMMEL • High pressure: 80 bar • Pump output: 50 l/min • Pump: ALLWEILER Chip Disposal • Scraper belt conveyor with pump unit • Pump output: 550 l/min at 1.3 bar Extraction System • Manufacturer: IFS Industriefilter GmbH • Type: IFM 2000 Recooling Unit • Manufacturer: BKW GmbH • Type: WRK30-2KK2P • Output: 8 kW Pallet Changer • Manufacturer: Fördertechnik Mayer GmbH & Co

Būklė: naudotas, Gamybos metai: 2009, Maximum inner diameter: 600 mm Maximum grinding depth: 800 mm Maximum grinding length: 600 mm Control system: Siemens 840 D Maximum inner grinding diameter: 600 mm Maximum outer grinding diameter: 800 mm Maximum workpiece length: 380 mm Maximum external grinding length: 600 mm Travel - X1 axis: 150 mm Travel - Z1 axis: 1100 mm Travel - X2 axis: 470 mm Travel - Z2 axis: 800 mm Workpiece spindle power: 8.5 kW Stepless speed range: 1–795 rpm Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U axis): 300 mm - Swivel angle (B1 axis): -0.5°/+12° - Workpiece spindle drive power: 8.5 kW - Stepless speed range: 1–795 rpm - Setup speed (jog mode): 10 rpm - Spindle head size A8 as per DIN 55026 - Through-hole: 58.5 mm - Maximum workpiece diameter: 830 mm Ijdpowp S Tnofx Agfehw - Max. workpiece length (supported at one end): 800 mm - Max. workpiece length (between centers): 800 mm - Max. spindle head load capacity: 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of the internal grinding axis on table: 780 mm - Stepless drive power of internal grinding spindles (belt-driven): 7.5 kW - Grinding spindle mounting bore (diameter): 100 mm / 125 mm - Grinding spindle mounting length: 220 mm - Maximum grinding diameter: 600 mm - Maximum grinding depth: 800 mm External and face grinding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - External grinding spindle drive power: 7.5 kW - Grinding spindle mounting bore: Ø 140 mm - Maximum grinding diameter: 800 mm - Maximum grinding length: 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm

Būklė: geras (naudotas), Maximum pressing force: 10 tonnes. Operating pressure: 16 MPa Cylinder stroke: 400 mm Downward speed: 100 mm/sec Speed up to 450 mm/sec Power requirement: 5.2 kW Weight: 1.3 tonnes Ihodpfx Aoydlvkegfsw Clamping table modified! Not the original table!

Būklė: naudotas, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Machine weight approx.: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Required floor space approx. LxWxH: 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 workstations featuring 15 drilling and milling spindles For example, suitable for large batch production of fittings. Further technical specifications: - Workpiece carrier: workpiece holding drum Ø 800 mm with 8 workpiece clamping stations, cycle time 10 sec. Isdpfx Aeu Idvwsgfshw - Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left side: 3x drilling and milling spindles and 2x tapping spindles - Right side: 2x drilling and milling spindles, 2x tapping spindles, 1x U-axis, plus 2x radial tapping spindles adjustable, 2x drilling/milling spindles (1 adjustable), 1x U-axis adjustable - 1st Tapping unit: SK 40 tool holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm, reversible - 2nd Tapping unit: SK 40 tool holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm, reversible Equipment: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Operator panel - Manual pushbutton Subject to prior sale.

Būklė: naudotas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Approx. machine weight: 17.0 t Isdpfeu Idxfsx Agfshw Total connected load: 83.0 kW Machine dimensions (LxWxH): 2400x2800x2800 mm Control cabinet dimensions: - No. 1: LxWxH: 1000x850x2350 mm - No. 2: LxWxH: 1250x650x2230 mm - No. 3: LxWxH: 650x600x1700 mm - No. 4: LxWxH: 1000x500x1350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations equipped with 15 drilling and milling spindles Suitable, for example, for the production of industrial valves in larger quantities (see photo) Further technical specifications: - Workpiece carrier: workpiece drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling-milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes - Thread cutting unit 1: SK 40 tool holder; quill Ø 125 mm; stroke 125 mm; speed 35.5 - 900 rpm; right/left rotation - Thread cutting unit 2: SK 40 tool holder; quill Ø 125 mm; stroke 80 mm; speed 45 - 560 rpm; right/left rotation Equipment: - 2 hydraulic units - Chip conveyor system - Band filter, manufacturer: Filtertechnik Gera (conveyor belt width 430 mm) - Operator panel - Hand-held control transmitter This machine is not connected. Sale as is! i. D.

Būklė: naudotas, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Machine weight approx.: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No.1: LxWxH: 1000 x 850 x 2300 mm No.2: LxWxH: 1250 x 850 x 2500 mm No.3: LxWxH: 1000 x 850 x 2100 mm No.4: LxWxH: 1000 x 500 x 2350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT with 3 working stations, equipped with 15 drilling and milling spindles For example: Production of large batches of fittings Further technical specifications of the machine: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 workpiece clamping stations, indexing time 10 sec. - Drilling-milling unit: SK40 taper; spindle stroke 125 mm; feed 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left side: 3x drilling and milling spindles, 2x tapping spindles - Right side: 2x drilling and milling spindles, 2x tapping spindles, 1x U-axis; additionally, 2x radial tapping spindles adjustable, 2x drilling/milling spindles (one of which adjustable), and 1x U-axis adjustable - 1st Tapping unit: SK40 taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left - 2nd Tapping unit: SK40 taper; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left Equipment: - 2 hydraulic power units - Swarf conveyor system - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Operating panel - Handheld control unit Subject to prior sale. Ihedpfx Agju Idv Djfow

Būklė: naudotas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Approx. machine weight: 17.0 t Space requirements approx. LxWxH: 5.0 x 6.2 x 3.8 m Machine dimensions LxWxH: 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 2300 mm No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 processing stations and 15 drilling/milling spindles For example, for the high-volume production of fittings Additional technical data for the machine: - Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec - Drilling/milling unit: SK 40 spindle taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right side: 4x drilling and milling spindles with 18 speed steps and 1x hydraulic tapping spindle with 14 - 224 rpm - Left side: 4x drilling and milling spindles with 18 speed steps and 1x hydraulic tapping spindle with 14 - 224 rpm plus 3x radial drilling and milling spindles, including 1x U-axis and 1x tapping spindle - 1st tapping unit: SK 40 spindle taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5 - 900 rpm; right/left rotation - 2nd tapping unit: SK 40 spindle taper; quill Ø 125 mm; working stroke 80 mm; speed 45 - 560 rpm; right/left rotation Equipment: - 2 hydraulic power units - Swarf conveyor system - Belt filter manufactured by Filtertechnik Gera (fleece belt 430 mm) - Operator panel Ihjdpfx Ageu Idxrjfew - Hand-held control unit subject to prior sale.

Būklė: labai geros būklės (naudotas), Žievės disko skersmuo: 600 mm Peilių skaičius: 6 Įtampa: 380 V, 50 Hz Ihjdpfx Aoxz Unpegfsw Variklio galia: 11 kW

Būklė: naudotas, Wema Probst profile milling machine Ihsdpfx Agoc N N U Njfow Main motor: 11 kW Dismantled and ready for loading

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, bendras aukštis: 34 500 mm, įrengimo aukštis: 800 mm, bendras plotis: 12 500 mm, bendras ilgis: 22 000 mm, gerklės gylis: 800 mm, spaudimo jėga: 160 t, stalo plotis: 900 mm, stalo ilgis: 630 mm, darbinis greitis: 200 mm/s, bendras svoris: 7 000 kg, atbulinės eigos greitis: 125 mm/s, stūmoklio plokštės plotis: 700 mm, ramplokštės ilgis: 450 mm, įvesties srovės tipas: trifazis, eigos ilgis: 500 mm, darbinis slėgis: 160 juosta, slėgis: 250 juosta, alyvos bako talpa: 500 l, galia: 17 kW (23,11 AG), Hidraulinė presas PYE 160 S/1M. Gamybos metai: 1984. Gamintojas: VEB Wema Zeulenroda (Vokietija). Mašina po kapitalinio patikrinimo. Parametrai: Didžiausia presavimo jėga – 160 t. Darbinis slėgis 16 MPa. Viršutinis stalas 700 x 450 mm. Apatinis stalas 900 x 630 mm. Praėjimas 800 mm. Cilindro eiga 500 mm. Nuleidimo greitis 200 mm/sek. Pakėlimo greitis 125 mm/sek. Galingumo poreikis 17 kW. Alyvos bako talpa 500 l. Svoris 7000 kg. Aukštis 3450 mm, ilgis 2200 mm, plotis 1250 mm. Mašina labai geros būklės. Yra galimybė apžiūrėti bei patikrinti presą veikimo metu. Iodpjqy E I Rofx Agfehw

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 3 700 mm, bendras plotis: 1 250 mm, bendras ilgis: 2 200 mm, gerklės gylis: 800 mm, spaudimo jėga: 250 t, stalo plotis: 900 mm, stalo ilgis: 630 mm, darbinis greitis: 200 mm/s, bendras svoris: 8 000 kg, atbulinės eigos greitis: 110 mm/s, stūmoklio plokštės plotis: 750 mm, ramplokštės ilgis: 450 mm, eigos ilgis: 500 mm, alyvos bako talpa: 500 l, Hidraulinė presas PYE 250 SS. Gamintojas: WMW VEB Zeulenroda (Vokietija), pagaminta 1985 m. Parametrai: Didžiausia presavimo jėga 250 tonų. Darbinis slėgis 18,6 MPa. Viršutinis stalas – 750x450 mm. Apatinis stalas – 900x630 mm. Praėjimas – 800 mm. Cilindro eiga – 500 mm. Leidimosi greitis – 200 mm/s. Pakilimo greitis – 220 mm/s. Galia – 24 kW. Svoris – 8 500 kg. Aukštis – 3 680 mm, ilgis – 2 200 mm, plotis – 1 250 mm. Techninė būklė labai gera. Po kapitalinio remonto. Ihjdpfxsvcb Tle Agfsw

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, veikimo valandos: 308 181 h, Funkcionalumas: visiškai funkcionalus, Staklė: WEMA PROBST RHM (antros kartos) Pagaminimo metai: apie 1999 Medienos skersmuo: 30 – 120 mm Pagrindinis variklis (pjovimas): 15 kW / 380 V Pavaros varikliai: 1,5 kW Bendra galia: apie 17 kW Ihedjydmp Sepfx Agfjw Būklė: Puiki techninė ir vizualinė būklė Papildomai: Į komplektą įeina keli visiškai naujų peilių komplektai Vieta: Bulgarija, Vrani kon 7940 Kaina: Pagal užklausą Demonstracija galima vietoje!

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Máquina fresadora Wema Probst RHM 250 II-H NUEVA - Diámetros de 100mm a 250mm - Control electrónico de avance - 2 cabezales de fresado - Cabezal 1 = diámetro 150-300mm Isdpfjubbryjx Agfjhw - Cabezal 2 = diámetro 100-250mm - velocidad de avance 6-34m/min - armario eléctrico completo + panel de control

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Wema Probst QF50 cross machining center Iedpfx Aswc Tdnsgfshw Cross milling machine for processing round timber, equipped with a swiveling table to adjust the milling angle. 2x processing stations 1x cross milling unit 1x drilling unit

Būklė: naujas, VKM supplies spare parts for the complete range of VKM and Oswald equipment, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and custom replacement knives produced to drawing for a wide variety of woodworking machines. Many items are available from stock. Below is a list of some of the most frequently requested parts: Ihjdpfx Ajg Rn Avegfew Centering rollers, 40 mm bore €112.00/each Centering rollers, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Discharge roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide slide RM7072W €302.00/each Oswald RM162 knife holder RM7066W €215.00/each We will be happy to provide a quotation including commercial terms. Additional spare parts are available upon request.

Būklė: naujas, Gamybos metai: 2025, VKM supplies spare parts for VKM, Oswald (the full delivery range), and selected Bezner-Oswald and Wema Probst machines, as well as BÖGLI bandsaws and replacement knives manufactured according to drawings for a variety of woodworking machines. Some parts are available from stock. Below are some of the most frequently requested parts: Centring rollers, 40mm bore €112.00/each Centring rollers, 50mm bore €156.00/each Feed roller, 40mm bore €118.00/each Feed roller, 50mm bore €138.00/each Discharge roller, 40mm bore €102.00/each Iedowagxmjpfx Agfohw Feed roller, 50mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife holder RM7066W €215.00/each We are happy to provide a quotation including commercial terms. Further spare parts available on request.

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), Singulation unit for small-diameter timber and stakes, suitable for RH milling machines or other applications. Consisting of: inclined infeed with retaining hooks; disc-type singulation/cascade unit with 3 singulation stages. Wood length: 0.3 m to 5.5 m. Wood diameter: up to approx. 12 cm. Ready for demonstration. Iodpfx Aowqdc Rogfshw

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Singulation unit for small-diameter timber and stakes, suitable for RH milling machines or other applications. Consisting of: inclined infeed with retaining hooks; disc-type singulation/cascade unit with 3 singulation stages. Iodpfxjwqf S Hs Agfjhw Wood length: 0.3 m to 5.5 m. Wood diameter: up to approx. 12 cm. Ready for demonstration.

Gamybos metai: 2020, būklė: naudotas, No. 3233 Cross Drilling Machine Wema Probst QBV 200 Used, year of manufacture 2020 The machine is in an as-new condition and has completed fewer than 30 drilling operations. Suitable for machining transverse slots and boreholes in round-milled or profiled timber. With this machine, form-fitting joints can be produced in round timber with three-dimensional manual adjustment. Typical applications include corner joints for log houses, timber frame constructions, and other products in the "garden timber" segment, such as fences, carports, planters, raised beds, guardrails, etc. The cross drilling machine consists of a base frame in welded steel construction with a pivoting drilling unit, gas spring-supported drill column, and adjustable column positioning. Timber is clamped by two centering vices. With the special tool (circular saw), asymmetric or end-face machining is also possible. The machine also enables 90° holes up to 120 mm diameter in timber using flat drill bits. Accessories: Collet chuck with 25 mm diameter for tool holding, no tools included Timber diameter: 60 – 200 mm Tool adjustment range: +/- 60° at a 60 mm diameter / +/- 45° at 80–140 mm diameter / +/- 30° at 160–200 mm diameter Motor power: 2.2 kW Speed: 1,200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1,200 x 1,400 x 2,400 mm (L x W x H) Weight approx. 380 kg Iodpfx Aowt Abwogfohw Sale on behalf of the customer, ex location near 46026 Valencia (Spain), without disassembly, transport, or installation Optional: Disassembly, loading, and transport by us available on request Errors in description or price excepted To avoid misunderstandings, viewing on site by appointment is possible and recommended Sale is as is Technical data, condition description, year of manufacture, and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is given on used machines; they are sold “as inspected” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, 1- Loading of logs 2 - Entry to cylinder 3 - Cylinder The resulting roll diameter is 75–200 mm Minimum input material length 1100 mm 15 kW cutter head drive motor stepless regulation of feed speed + forward / reverse + 1.7 kW feed motor Simultaneously: 2 + toothed sprocket rollers Cutter head 4 + 2 + smooth feed rollers electrically adjustable cutter head 0.25 kW electrically adjustable axes 1.1 kW Isdpfxjthqqmo Agfehw Dimensions (L/W/H): 3570x1300x1700 mm Weight approx. 4000 kg 4-cylinder outlet