Perdavimo mašina

WEMA Vogtland BTrPi 900/8

Sąlyga: naudotas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Approx. machine weight: 17.0 t Total connected load: 83.0 kW Machine dimensions (LxWxH): 2400x2800x2800 mm Control cabinet dimensions: - No. 1: LxWxH: 1000x850x2350 mm - No. 2: LxWxH: 1250x650x2230 mm - No. 3: LxWxH: 650x600x1700 mm - No. 4: LxWxH: 1000x500x1350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations equipped with 15 drilling and milling spindles Suitable, for example, for the production of industrial valves in larger quantities (see photo) Further technical specifications: - Workpiece carrier: workpiece drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling-milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes - Thread cutting unit 1: SK 40 tool holder; quill Ø 125 mm; stroke 125 mm; speed 35.5 - 900 rpm; right/left rotation - Thread cutting unit 2: SK 40 tool holder; quill Ø 125 mm; stroke 80 mm; speed 45 - 560 rpm; right/left rotation Equipment: Gsdpsu Idxfofx Acujkc - 2 hydraulic units - Chip conveyor system - Band filter, manufacturer: Filtertechnik Gera (conveyor belt width 430 mm) - Operator panel - Hand-held control transmitter This machine is not connected. Sale as is! i. D.

Sąlyga: naudotas, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Machine weight approx.: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No.1: LxWxH: 1000 x 850 x 2300 mm No.2: LxWxH: 1250 x 850 x 2500 mm No.3: LxWxH: 1000 x 850 x 2100 mm No.4: LxWxH: 1000 x 500 x 2350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT with 3 working stations, equipped with 15 drilling and milling spindles For example: Production of large batches of fittings Further technical specifications of the machine: - Workpiece carrier: Workpiece holding drum Ø 800 mm for 8 workpiece clamping stations, indexing time 10 sec. - Drilling-milling unit: SK40 taper; spindle stroke 125 mm; feed 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left side: 3x drilling and milling spindles, 2x tapping spindles - Right side: 2x drilling and milling spindles, 2x tapping spindles, 1x U-axis; additionally, 2x radial tapping spindles adjustable, 2x drilling/milling spindles (one of which adjustable), and 1x U-axis adjustable - 1st Tapping unit: SK40 taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm; right/left Gkedpfxju Idv Dj Acuoc - 2nd Tapping unit: SK40 taper; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm; right/left Equipment: - 2 hydraulic power units - Swarf conveyor system - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Operating panel - Handheld control unit Subject to prior sale.

Sąlyga: naudotas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Approx. machine weight: 17.0 t Space requirements approx. LxWxH: 5.0 x 6.2 x 3.8 m Machine dimensions LxWxH: 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 2300 mm Gjdeu Idxrspfx Acuekc No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 processing stations and 15 drilling/milling spindles For example, for the high-volume production of fittings Additional technical data for the machine: - Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec - Drilling/milling unit: SK 40 spindle taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right side: 4x drilling and milling spindles with 18 speed steps and 1x hydraulic tapping spindle with 14 - 224 rpm - Left side: 4x drilling and milling spindles with 18 speed steps and 1x hydraulic tapping spindle with 14 - 224 rpm plus 3x radial drilling and milling spindles, including 1x U-axis and 1x tapping spindle - 1st tapping unit: SK 40 spindle taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5 - 900 rpm; right/left rotation - 2nd tapping unit: SK 40 spindle taper; quill Ø 125 mm; working stroke 80 mm; speed 45 - 560 rpm; right/left rotation Equipment: - 2 hydraulic power units - Swarf conveyor system - Belt filter manufactured by Filtertechnik Gera (fleece belt 430 mm) - Operator panel - Hand-held control unit subject to prior sale.