Perdavimo mašina

WEMA Vogtland BTrPi 900/8

Būklė: naudotas, Technical Details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Machine weight approx.: 18.0 t Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2300 mm No. 2: LxWxH: 1250 x 850 x 2500 mm No. 3: LxWxH: 1000 x 850 x 2100 mm No. 4: LxWxH: 1000 x 500 x 2350 mm Todpfxou Idvwj An Hjc Required floor space approx. LxWxH: 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 workstations featuring 15 drilling and milling spindles For example, suitable for large batch production of fittings. Further technical specifications: - Workpiece carrier: workpiece holding drum Ø 800 mm with 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Left side: 3x drilling and milling spindles and 2x tapping spindles - Right side: 2x drilling and milling spindles, 2x tapping spindles, 1x U-axis, plus 2x radial tapping spindles adjustable, 2x drilling/milling spindles (1 adjustable), 1x U-axis adjustable - 1st Tapping unit: SK 40 tool holder; quill Ø 125 mm; working stroke 125 mm; speed 35.5 – 900 rpm, reversible - 2nd Tapping unit: SK 40 tool holder; quill Ø 125 mm; working stroke 80 mm; speed 45 – 560 rpm, reversible Equipment: - 2 hydraulic power units - Chip conveyor - Belt filter by Filtertechnik Gera (fleece belt 430 mm) - Operator panel - Manual pushbutton Subject to prior sale.

Būklė: naudotas, Gamybos metai: 2008, Technical details: Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Workpiece length: 66 mm Tjdpfxelqac Sj An Hsc The system was originally delivered for the following workpiece sizes: diameter 26 mm - 29 mm, length 65 mm - 66 mm. By changing parts in the clamping device, handling units, etc., diameters up to approx. Ø50 mm could likely be processed. A total length of just under 400 mm should be possible with some modifications. This is also dependent on tool lengths, processing lengths on the component, etc.

Būklė: naudotas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Approx. machine weight: 17.0 t Total connected load: 83.0 kW Machine dimensions (LxWxH): 2400x2800x2800 mm Control cabinet dimensions: - No. 1: LxWxH: 1000x850x2350 mm - No. 2: LxWxH: 1250x650x2230 mm - No. 3: LxWxH: 650x600x1700 mm Todpou Idxfofx An Hec - No. 4: LxWxH: 1000x500x1350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER MACHINE with 3 working stations equipped with 15 drilling and milling spindles Suitable, for example, for the production of industrial valves in larger quantities (see photo) Further technical specifications: - Workpiece carrier: workpiece drum Ø 800 mm for 8 clamping stations, cycle time 10 sec. - Drilling-milling unit: SK 40 tool holder; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes - Left side: 3x drilling and milling spindles, 1x tapping spindle, 1x U-axis, plus 2x radial drilling-milling spindles adjustable, 1x adjustable tapping spindle, and 2x adjustable U-axes - Thread cutting unit 1: SK 40 tool holder; quill Ø 125 mm; stroke 125 mm; speed 35.5 - 900 rpm; right/left rotation - Thread cutting unit 2: SK 40 tool holder; quill Ø 125 mm; stroke 80 mm; speed 45 - 560 rpm; right/left rotation Equipment: - 2 hydraulic units - Chip conveyor system - Band filter, manufacturer: Filtertechnik Gera (conveyor belt width 430 mm) - Operator panel - Hand-held control transmitter This machine is not connected. Sale as is! i. D.

Būklė: naudotas, Technical details: Number of spindles: 15 units Number of stations: 8 units Tedpfx Aneu Idxrs Hsc Control system: PS 2000 Total power requirement: 83.0 kW Approx. machine weight: 17.0 t Space requirements approx. LxWxH: 5.0 x 6.2 x 3.8 m Machine dimensions LxWxH: 2400 x 2800 x 2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000 x 850 x 2350 mm No. 2: LxWxH: 1250 x 650 x 2230 mm No. 3: LxWxH: 650 x 600 x 2300 mm No. 4: LxWxH: 1300 x 650 x 2350 mm TRANSFER AUTOMAT with 3 processing stations and 15 drilling/milling spindles For example, for the high-volume production of fittings Additional technical data for the machine: - Workpiece carrier: workpiece drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec - Drilling/milling unit: SK 40 spindle taper; spindle stroke 125 mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right side: 4x drilling and milling spindles with 18 speed steps and 1x hydraulic tapping spindle with 14 - 224 rpm - Left side: 4x drilling and milling spindles with 18 speed steps and 1x hydraulic tapping spindle with 14 - 224 rpm plus 3x radial drilling and milling spindles, including 1x U-axis and 1x tapping spindle - 1st tapping unit: SK 40 spindle taper; quill Ø 125 mm; working stroke 125 mm; speed 35.5 - 900 rpm; right/left rotation - 2nd tapping unit: SK 40 spindle taper; quill Ø 125 mm; working stroke 80 mm; speed 45 - 560 rpm; right/left rotation Equipment: - 2 hydraulic power units - Swarf conveyor system - Belt filter manufactured by Filtertechnik Gera (fleece belt 430 mm) - Operator panel - Hand-held control unit subject to prior sale.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1987, Gebrauchte Giddings & Lewis Modell MC 50 Twin Pallet Horizontal-Bearbeitungszentrum mit angetriebener Spindel, 60-fach Werkzeugwechsler (ATC) und G&L 8000A Steuerungssystem. Seriennummer: 445-1052. Baujahr: 1987 Die Maschine war zuvor bei Rolls Royce Plc in Derby, UK, installiert. Sofort verfügbar und nun in Belgien, wo sie besichtigt werden kann. Spindeldurchmesser – 130 mm Spindelaufnahme – ISO 50 Spindelhub (Z-Achse) – 915 mm Spindeldrehzahlen (4 Bereiche) – 5 bis 1.500 min⁻¹ Hauptantrieb – 30 PS Palettengröße – 1.219 x 1.245 mm Palettenindexierung – 0,001° (360.000 Positionen) Max. Palettenwechsellast – 5.000 kg Maximale Auflast ohne APC – 9.000 kg Längsverfahrweg (W) – 1.700 mm Tsdpfeu Dahnsx An Hec Vertikalverfahrweg (Y) – 1.500 mm Querweg (X) – 1.800 mm Vorschubgeschwindigkeit – 1,0 mm/min bis Eilgang Eilgangsgeschwindigkeit (X und Y) – 4.500 mm/min Eilgangsgeschwindigkeit (Z und W) – 3.000 mm/min Automatischer Werkzeugwechsler – 60 Plätze Stromversorgung – 415 V, 3 Phasen, 50 Hz Ausstattung und Merkmale: - Hochdruck-Kühlmittelzufuhr durch die Spindel (25 bar) - Hochpräzise Maschine, regelmäßig vom Hersteller gewartet und kalibriert - Renishaw-Tastsystem Abmessungen: Länge – 11.679 mm Breite – 6.502 mm Höhe – 4.423 mm Gewicht – 40.329 kg

Būklė: paruoštas naudoti (naudotas), Length: 8,225 mm, width: 3,200 mm, with documentation. Todpfx Aji Ew Dpjn Hsc

Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), Max. workpiece diameter: 42 mm, connected load: 132 kVA, length: 4600 mm, width: 7500 mm, height: 3000 mm, equipped with bar feeder. Tjdpsp S Sq Defx An Hsc

Būklė: naudotas, Gamybos metai: 1997, Stations: 10 / 22 Tool Holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total Power Requirement: approx. 130 kW = Transfer Machine Rotary indexing drum with 10 workpiece stations, 22 machining units (10 drilling units, 5 drilling and tapping units, 3 drilling and countersinking units, 1 drilling, countersinking and tapping unit, 3 tapping units), Each unit equipped with SK 40 tool holder, motor power per unit between 4.5 and 5.5 kW, Control system: SIEMENS SIMATIC OP 3, Loading robot: ABB Accessories: chuck (without jaws), chip conveyor, coolant system Tedpstqqlrjfx An Hjc

Būklė: naudotas, Gamybos metai: 2001, Stations: 10 / 22 Tool holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total power requirement: approx. 112 kW Tsdotqqlqopfx An Hoc = Transfer machine Indexing drum with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Tapping: 8 units; Drilling & Counterboring: 5 units; Drilling, Counterboring & Tapping: 2 units), Each machining unit equipped with SK 40 tool holder, Motor power per unit 4.0 to 4.5 kW, SIEMENS SIMATIC OP 3 control, ABB loading robot Accessories: Collet chuck (without jaws), chip conveyor, coolant system

Būklė: geras (naudotas), Gamybos metai: 2002, Tai yra 2002 metų EUBAMA S6 staklės. Spaudimo (žnyplių) stočių skaičius: 8 Tedpsv Ef N Ajfx An Hsc 2 žnyplių griebtuvo sistema Maksimalus spaudimo skersmuo: 40 mm Maksimalus ruošinio ilgis: 330 mm Maksimalus našumas (ciklų/min): 40 Hidraulinė spaudimo sistema Staklių valdymas: CNC Siemens SINUMERIK Apdirbimo agregatų skaičius: 15 FMB MT/42/4200/B strypų padavimo žurnalas Žurnalo talpa: 4,2 metro KNOLL drožlių transporteris KNOLL aušinimo skysčio bakas (VRF 250/1250) Staklės yra darbinės būklės.