Rotacinė perkėlimo mašina

RIELLO AZ.21/104/10-V

Sąlyga: naudotas, Gamybos metai: 2008, Sukimas virš kreipiamųjų 923,8 mm Sukimas virš skersinio stalo 755 mm Maks. tekinimo skersmuo 356 mm Maks. tekinimo ilgis 510 mm X/Z eiga 260/590 mm Nedpfx Afju Sn Hze Nowb Veleno apsisukimai 5000 aps./min Revolveris su 12 stotelių Veleno gręžimo anga 73 mm Valdymas: MSX-850 III Įranga: Įvorinio prispaudimo įranga su įvorėmis Drožlių konvejeris 3 standartiniai įrankių laikikliai Be portalo pakrovėjo komplekte

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 810 mm, sukimosi skersmuo virš skersinio stumduko: 800 mm, tekėjimo skersmuo: 320 mm, ašies variklio galia: 25 000 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 73 mm, X ašies eiga: 210 mm, Y ašies eiga: 110 mm, Z ašies eigos atstumas: 810 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 50 m/min, sukimosi greitis (maks.): 6 000 aps./min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing Diameter Over Bed: 800 mm Swing Diameter Over Cross Slide: 800 mm Maximum Turning Diameter: 320 mm Standard Turning Diameter: 200 mm Maximum Distance Between Centers: 1,130 mm Maximum Turning Length: 810 mm Maximum Workpiece Dimensions: 300 mm TRAVELS Turret Axis X1 & X2: 210 mm Turret Axis Y1 & Y2: +65 / -45 mm Turret Axis Z1 & Z2: 810 mm Head Axis B2: 920 mm MAIN SPINDLE Maximum Spindle Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Machinable Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° Nsdpfx Aewlvlgsf Nowb SUBSPINDLE Maximum Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° FEED RATES Turret 1 Rapid Traverse X/Y/Z: 30/20/50 m/min Turret 2 Rapid Traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of Turrets: 2 Number of Tool Stations per Turret: 16 Turning Tool Shank Cross Section: 20 x 20 mm Max Boring Bar Diameter: 32 mm Turret Indexing Time (1 station): 0.18 s Max Speed of Driven Tools: 6,000 rpm Driven Tool Motor Power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Installation Area with Chip Conveyor: 5,120 x 2,720 mm Net Weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Interface for bar feeder • Gantry parts unloading arm • Tool load monitoring and load management system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 self-centering chucks, Ø 210 mm • 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacture: 2010

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Įranga: 1 važiuoklės įtraukimas dešinėje 1 ekscentrinė presė 250 kN 4 standartiniai važiuoklės agregatai 1 siauras važiuoklės agregatas Nwodpfx Ajr D N Eqef Nob Darbinė sritis: Vielos storio diapazonas: iki 6,0 mm Juostos plotis: iki 80 mm Pritraukimo ilgis: iki 520 mm Galingumas: 10 - 250 vnt./min.

Sąlyga: naudotas, Used vacuum disc rotary evaporator Alfa Laval "Centritherm" model CT-6. Maximum evaporated water capacity approx. 800 kg/h. This is a complete evaporation unit consisting of: 1. CT-6 Centritherm disc vacuum evaporator, mounted on a platform 2. Alfa Laval plate heat exchanger, model P2-HL 3. Control panel 4. Feed pump 5. Concentrate pump 6. Condensate pump 7. Vacuum pump 8. Connecting pipelines 9. Assembly tools for disassembly of discs and the main drum Nedelc Dwvjpfx Af Newb

Sąlyga: naudotas, CNC multi-spindle automatic lathe INDEX MS 32 C Nwjdpeuhaqbsfx Af Nob

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Nwjdpfotzdyzjx Af Njb Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: geras (naudotas), Gamybos metai: 1989, mašinos/transporto priemonės numeris: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42, each in 4/42mm configuration (5x available) with Müdata, Mütrans, without creel, exceptionally clean machines from Germany, 2nd hand NF42 in 4/42mm from 1988–1990 AN. No.: 88.04.017 H ex Alge, with Müdata, 16 shafts, very clean, €7,000 Nwodpfx Afor I Am He Neb AN. No.: 88.04.169 D ex Alge, with Müdata, 16 shafts, very clean, €7,000 No. 213 AN. No.: 89.04.019 B ex Alge, with Müdata, 16 shafts, very clean, €7,000 No. 223 AN. No.: 89.04.046 B ex Alge, with Müdata, 16 shafts, very clean, €7,000 AN. No.: 90.00.066 B ex Alge, with Müdata, 16 shafts, very clean, €7,000

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Vertical Boring Mill – Double Column / Manufacturer: SCHIESS BRIGHTON Model: Vertimaster / Year of manufacture: 2009 The machine can be inspected by appointment. Condition: Fully functional / ready for operation. TECHNICAL DATA: Working Area and Axes Travels: - Max. machining / swing diameter: 9,000 mm - Max. machining height: 6,000 mm - Table diameter: 6,000 mm - Clearance between columns: 8,300 mm - Main drive: 240 kW - Max. torque at table: 250 kN m - Max. workpiece weight: 150 t Drilling and Milling Attachment: - Max. drive power: 63 kW - Spindle speeds: 0 – 2,500 rpm - Max. torque: 2,200 Nm Nwodpsxgv Egofx Af Njb Ram: - Cross-section: 520 x 420 mm - Minimum plunge diameter: 750 mm - Max. cutting force at 6 m diameter: 75 kN EQUIPMENT: - CNC control: SIEMENS Sinumerik 840D - Tool holder: SK 50 - Operator platform - Chip conveyor - Documentation - Further high-quality features ... No guarantee for completeness and accuracy of technical data and equipment details. – Subject to prior sale – A detailed technical specification sheet and additional equipment information available upon request.

Sąlyga: naudotas, Gamybos metai: 2013, valdiklių gamintojas: Siemens, valdiklio modelis: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Nwsdpjw Tg Adefx Af Nob Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector: Pneumatic Z-axis travel: 750 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feed: Short bar loader, EMCO LM 1200 Finished parts removal: Workpiece pick-off device (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, Absolent make Tool holders: Various fixed and driven holders Additional equipment: Spindle chiller unit

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machinable length: 184 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1 degrees SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1 degrees TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm SUBSPINDLE TOOLING - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kVA MACHINE HOURS - Operating hours: 54,035 h EQUIPMENT - CNC control: Fanuc PNC DECO - Driven tooling motorisation at: S2, S3, S5, S6 - Powered guiding bush Nsdpfouhhp Sex Af Nowb - Part extraction unit - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company on the buyer's side. - Number of driven tool holders: 3