Perdavimo mašina

EUBAMA S6

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61062, strypo praėjimas: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar feeder Model: IEMCA PRA52 F33 Year of manufacture: 2004 Maximum bar length: 3300 mm Maximum bar diameter: 9.1 mm Control unit: Siemens S7-200 Drive for parting-off unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Face turning chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen tool monitor Chip conveyor (Knoll 500 K-1/450, year of manufacture 2004) Oil filtration system (Knoll FKA 150) Scraper-belt conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic unit Central lubrication Hydraulic circuit diagram and accessories Pressure booster HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air maintenance unit DA 300 Chuck plate for jaw chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear drive Clamping flange (diameter: 100 mm) Spindle unit complete with toothed belt drive Coolant supply Cover plates for void stations Material stop (60 mm stroke) Parting unit extended by 35 mm Z-axis measuring system Spindle unit with hydraulic NC-axis Device for flushing out clamping jaws Change parts for material clamping Stops for hydraulic unit carrier Change parts for bar loader magazine Tools Tool holders Additional clamping with collet chuck Kedpfx Acsyx Ia Neisdt Further details about the machine can be found in the attached documents.

Būklė: nepatikrintas (naudotas), Gamybos metai: 1996, tuščias svoris: 800 kg, skersmuo 1,5–160 mm eiga 400 mm svoris 800 kg Kjdpjwgm Saofx Acijdt

Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), Šis EUBAMA S6 rotacinis transporteris pagamintas 2006 m. Jis turi tvirtą pagrindo rėmą, hidraulinę armatūrą, "Stöber" servo variklį su planetine pavarų dėže ir frezavimo įrenginį su NC padavimu. Idealiai tikslioje įrangoje taip pat yra paviršiaus tekinimo galvutė ir ilgio kontrolės sistema su pneumatiniu cilindru ir lazeriu. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. • Pagrindo rėmas • Pagrindo rėmo priedai • Hidraulinės jungtys • Įrenginio laikiklis (kairysis) TK420 • 108 kiaurymės • Vamzdis (aušinimo skysčio grąžinimas) • Flanšinis velenas su priekine pavara • Stöber servo variklis su planetine pavarų dėže • Ribinio jungiklio stebėjimas • Apsauginis gaubtas • Formos tekinimo įrenginys - medžiagos kreipiklis Kdedpfx Acex D If Tsiot • Kreipiančioji ašis • Dangteliai su tuščiomis stotimis • Frezavimo įrenginys su NC padavimu • Užveržimas su dantytu diržo skriemuliu z1=16 • Dantytas diržinis skriemulys Z1=16 • Dantytas diržinis skriemulys Z2=20 • Dantytas diržas 25 AT10 / 730 • Hidraulinė jėgainė 70 100 04358 32 dm³/min • Centrinis tepimas • Deformacinė plokštė T - T Papildoma įranga • Dalies išstūmimo konsolė • Tiesinimo ir padavimo ritinėliai • Prispaudimo dalių keitimo stotis 1 • Įrankiai ir įrankių laikikliai • Darbo įrankiai S6 • Išstūmiklis su griebtuvu • Griebimo žnyplės (plokštelės) • Vidinio šešiakampio lizdo įspaudimo įtaisas • Veido tekinimo galvutė PCD 100-01-101 • Ilgio reguliavimas su pneumatiniu cilindru ir lazeriu • Ritės atrama (žvaigždinis kryžius) • Pratęsimas (ritės aukštis) • 2 žandikaulių griebtuvas • Pneumatiniai priedai (4 cilindrams) • Integruotas 24 voltų užpildymo įrenginys su avarinio stabdymo vožtuvu • DA 300 suslėgtojo oro priežiūros sistema

Būklė: naudotas, Gamybos metai: 1996, Technical details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm CNC control: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m Kdedpfx Aou Ngyzjciet CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding. - With the plunge-cut method, the maximum plunge length is 160 mm. - Automatic workpiece discharge via rail (the function/operation of which is not known to WMW AG) - Working grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, infeed angle right 0-6° and left 0-2°; wheel size 280x160 mm - Automatic grinding wheel balancing system Condition: Reference run not possible Machine does not operate in automatic mode Accessories: various grinding and regulating wheels available on request

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder Kdjdpfxeuhauye Acist - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor system KNOLL VRF 500 - Workpiece evacuation with conveyor at position 6

Būklė: naudotas, Gamybos metai: 1987, Technical details: Kjdpfjmf Aw Aox Acisdt Number of spindles: 8

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter-spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - CNC SIEMENS 840D - Counter-spindle - Polygon turning attachment: slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal system - Parts ejector - Fire protection system: KRAFT UND BAUER Kdedpouhatpofx Acist * Note: Functionality not guaranteed. Must be inspected by a qualified company engaged by the buyer.

Būklė: naudotas, Gamybos metai: 1988, Technical details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Rotational speeds: 47-94 rpm Feed rate: 0.5 – 6 mm/s Maximum stroke: 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Kdedpfxjw D Aq Ts Aciet Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Max. thread diameter 40 mm, min. thread diameter 3 mm Up to 3.5 mm pitch, max. pitch 1.75 mm Roller width min. 80 mm, max. 120 mm Spindle speed 47-94 Roller shaft diameter 40 Various rollers included as accessories

Būklė: naudotas, Gamybos metai: 2017, Technical specifications: X travel: 560 mm y travel: 560 mm z travel: 660 mm Control: Celos Siemens 840D SL Operate ERGOline Multitouch Spindle speed: 20 – 20,000 rpm Spindle motor: 25/35 kW Spindle torque: 86/130 Nm Tool holder: HSK-A63 Tool magazine capacity: 60 Kodpfx Aeyqybbjciedt Maximum tool diameter: 70 mm Tool diameter with adjacent stations free: 170 mm Maximum tool length: 450 mm Maximum tool weight: 12 kg Number of pallets: 2 Pallet size: 400 x 400 mm Maximum workpiece diameter: 630 mm Maximum workpiece height: 900 mm Table load capacity: 400 kg Rapid traverse x/y/z: 60 m/min Feed rate x/y/z: 60 m/min Internal coolant supply: 70 bar Approx. machine weight: 8.5 t Overall dimensions: 3200 x 4800 x 2900 mm Equipment: - Rotoclear viewing window - 4-color signal light - Electronic handwheel - Tool breakage and length measurement - Coolant shower - Renishaw spindle probe preparation (preparation only) - HSK taper cleaning station with brushes Horizontal machining center with Siemens Celos control, 4th axis rotary table, magazine for 123 HSK-A63 tools and 40 bar ICS. The machine has just been fitted with a new spindle.

Būklė: naudotas, Gamybos metai: 2008, Technical details: Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Kdsdpfxelqac So Acijt Workpiece length: 66 mm The system was originally delivered for the following workpiece sizes: diameter 26 mm - 29 mm, length 65 mm - 66 mm. By changing parts in the clamping device, handling units, etc., diameters up to approx. Ø50 mm could likely be processed. A total length of just under 400 mm should be possible with some modifications. This is also dependent on tool lengths, processing lengths on the component, etc.