"Hydromat HW25/12

Pfiffner HW 25/12

Sąlyga: naudotas, TECHNICAL DATA - Number of stations: 12 - Table indexing: 12 x 30 [°] - Collet type: SCHAUBLIN W25 - Max. clamping diameter: 25 [mm] - Max. workpiece length: 100 [mm] - Supply voltage: 3x 400 [V] - Installed power: 32 [kW] - Machine dimensions: 2700 x 2700 x 2500 [mm] - Weight: 4000 [kg] EQUIPMENT - CNC control: SIEMENS Sinumerik 805 - Bar loader: HYDROMAT 5.07.018-4, capacity 4200 mm - Station 1: Cut-off - Station 2: Longitudinal drilling 30/60 - Station 3: Longitudinal drilling 30/60 - Station 4: CNC turning, 2 axes - Station 5: Reversal - Station 6: Radial drilling 30/60 - Station 7: CNC turning, 2 axes - Station 8: Angular drilling 30/60 - Station 9: Radial drilling 30/60 - Station 10: Angular drilling 20/50 - Station 11: Radial drilling 20/50 - Station 12: Longitudinal drilling 30/60 - Ejection between station 12 and 1 - Parts conveyor - Chip conveyor: KNOLL 450 K-1/2000 - Coolant tank: KNOLL KTS-25-60-T - High-pressure pump: 40 [bar] Lhedpfeuhbwcex Af Ijb - Filtration: KNOLL VRF 500

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Įranga: 1 važiuoklės įtraukimas dešinėje 1 ekscentrinė presė 250 kN 4 standartiniai važiuoklės agregatai Lhedpfx Aor D N Eqsf Iob 1 siauras važiuoklės agregatas Darbinė sritis: Vielos storio diapazonas: iki 6,0 mm Juostos plotis: iki 80 mm Pritraukimo ilgis: iki 520 mm Galingumas: 10 - 250 vnt./min.

Sąlyga: naudotas, Used vacuum disc rotary evaporator Alfa Laval "Centritherm" model CT-6. Maximum evaporated water capacity approx. 800 kg/h. This is a complete evaporation unit consisting of: 1. CT-6 Centritherm disc vacuum evaporator, mounted on a platform Ljdpfx Afslc Dwvj Ishb 2. Alfa Laval plate heat exchanger, model P2-HL 3. Control panel 4. Feed pump 5. Concentrate pump 6. Condensate pump 7. Vacuum pump 8. Connecting pipelines 9. Assembly tools for disassembly of discs and the main drum

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 810 mm, sukimosi skersmuo virš skersinio stumduko: 800 mm, tekėjimo skersmuo: 320 mm, ašies variklio galia: 25 000 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 73 mm, X ašies eiga: 210 mm, Y ašies eiga: 110 mm, Z ašies eigos atstumas: 810 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 50 m/min, sukimosi greitis (maks.): 6 000 aps./min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing Diameter Over Bed: 800 mm Swing Diameter Over Cross Slide: 800 mm Lhjdpowlvlgjfx Af Iob Maximum Turning Diameter: 320 mm Standard Turning Diameter: 200 mm Maximum Distance Between Centers: 1,130 mm Maximum Turning Length: 810 mm Maximum Workpiece Dimensions: 300 mm TRAVELS Turret Axis X1 & X2: 210 mm Turret Axis Y1 & Y2: +65 / -45 mm Turret Axis Z1 & Z2: 810 mm Head Axis B2: 920 mm MAIN SPINDLE Maximum Spindle Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Machinable Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° SUBSPINDLE Maximum Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° FEED RATES Turret 1 Rapid Traverse X/Y/Z: 30/20/50 m/min Turret 2 Rapid Traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of Turrets: 2 Number of Tool Stations per Turret: 16 Turning Tool Shank Cross Section: 20 x 20 mm Max Boring Bar Diameter: 32 mm Turret Indexing Time (1 station): 0.18 s Max Speed of Driven Tools: 6,000 rpm Driven Tool Motor Power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Installation Area with Chip Conveyor: 5,120 x 2,720 mm Net Weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Interface for bar feeder • Gantry parts unloading arm • Tool load monitoring and load management system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 self-centering chucks, Ø 210 mm • 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacture: 2010

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Lodsv Scrbopfx Af Iehb

Sąlyga: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Lhedpfx Ajt E Dbysf Ieb Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, veikimo valandos: 47 600 h, mašinos/transporto priemonės numeris: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Ljdpfx Afjh Dzqlo Iehb Driven tools at all positions X-axis Z-axis C-axis Automatic tailstock Chip conveyor

Gamybos metai: 2006, Sąlyga: paruoštas naudoti (naudotas), A 3-axis precision milling machine DMG Mori is available. Travel X/Y/Z: 200 mm / 200 mm / 190 mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001 mm. Machine dimensions X/Y/Z: approx. 1800 mm / 1550 mm / 1850 mm, weight: approx. 2200 kg, control: Siemens 840D, operating hours: 4979 h, spindle hours: 1041 h. The spindle was fully overhauled in 2023. An on-site inspection is possible. Lhedpfx Asvi N D Sof Ijb

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: XD-38II-CP-0703-H, sukimosi skersmuo virš skersinio stumduko: 38 mm, veleno greitis (maks.): 6 500 aps./min, tekėjimo skersmuo: 38 mm, veleno skylė: 39 mm, galia: 7,5 kW (10,20 AG), The machine can be inspected at our premises in Immendingen by prior arrangement. Included in the scope of delivery are the original chip conveyor, as well as a bar feeder from FMB type 3-36 turbo. Also included is a Büchele SFB-301 high-pressure unit, 150 bar, with 4 valves. Ledpfxjvtmalo Af Ishb

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. Ljdpfx Ajtzdyzsf Iehb WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!