CNC šveicariško tipo tekinimo staklės

TSUGAMI B0205E-III

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Kwedpfx Aevivx Njf Ijt Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2013, veikimo valandos: 1 265 h, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 20 000 aps./min, tekėjimo skersmuo: 4 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Citizen R serisi otomatik torna tezgahları, küçük çaplı iş parçalarının işlenmesine yönelik olarak tasarlanmıştır. Bu makine çok az kullanılmıştır (yalnızca 15.800 parça işlenmiştir). Üretim yılı 2013. ASP-04 çubuk sürücü ile birlikte verilmektedir. Satış Türkiye dışına gerçekleşirse KDV alınmaz. Kwsdsvtancepfx Af Ijt

Sąlyga: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Kwsdpjt E Dbyjfx Af Iot Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Kwedsh Rdwxepfx Af Ijt Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, veikimo valandos: 47 600 h, mašinos/transporto priemonės numeris: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Driven tools at all positions X-axis Z-axis Kodjh Dzqlepfx Af Iowt C-axis Automatic tailstock Chip conveyor

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm Kwsdpfohzbipjx Af Iet - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, SIEMENS 840D SL CNC Control Kwjdewwundspfx Af Iet Travel paths: 550 x 320 x 420 mm Swiveling milling head: +100 / -10 ° Spindle mount: HSK A50 Spindle speed: up to 12,000 rpm Tool changer: 64 positions Turning spindle: 4,500 rpm NC swivel rotary table with B and C axes Tool breakage monitoring Tool length measuring system 3D measuring probe Various accessories MARCELS MASCHINEN CH

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, 7 axes Control: FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub-spindle) Max. spindle stroke 205 mm Max. spindle speed 10,000 rpm Tools Kwjdpfjwnd Dpex Af Ist 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear machining) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear-side machining

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Twin-spindle CNC lathe with 2 spindles, 3 turrets, and 3 Y-axes Each turret with 15 stations, BMT 44 Driven tools 2x C-axis 3x Y-axis Control: Fanuc 32i-TB Bar capacity: 65 mm Left spindle: 15/11 kW, Hainbuch Spanntop mini Axzug size 65 Right spindle: 11/7.5 kW, Kitagawa three-jaw chuck Finished parts gripper Conveyor belt Bar feeder interface Coolant system, separate tank 200 l Ksdpfxevxu Eas Af Iswt Cooling unit High pressure on turrets 1-3 via M-function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Tool monitoring for spindle and driven tools Spindle flushing through sub-spindle high-pressure coolant, Deublin rotary union Hinged belt chip conveyor Transformer Available immediately

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, STAR SH-12 CNC Sliding Head Lathe TECHNICAL DATA Turning diameter: 13 mm Spindle stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: approx. 950 kg Kjdpfx Afevllmhe Ijwt SCOPE OF DELIVERY Including (not a complete list): - STAR SH-12 CNC lathe - Bar feeder - Coolant pump - Transformer Exact scope of delivery as per photo documentation. We do not guarantee the accuracy, completeness, or timeliness of the information provided.