Smūgio, traukimo ir reikminės staklės pirkti naudotą (150)

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Refurbished mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: arbitrary Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height from floor without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine have been carried out: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (in emergency stop circuit) - Machine paneling below the safety door with chip protection and tool storage area - Electrical sensing of the clamping jaws (tool removal control to prevent unintentional return of the drawbridge) - Coolant swivel system with controlled solenoid valve during the swiveling process (for activating coolant before starting the broach stroke » optical lubrication flow inspection, no dry cutting!) - Routing of electrical cables in steel protective ducts - Heavy-duty control cabinet mounting for accommodating machine components - Additional oil-tight tray on the control cabinet - 3-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with permanent labeling Fpjdpfx Aew Ighijfdjh - 4 central lubrication points for the trapezoidal spindle drive Remarks: The machine has been fully overhauled; the machine body is completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, solenoid valve, and drain valve), including coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All sheet metal and panels are new - The following components have been overhauled and reused: - Machine base - Machine stand - Machine table with table inserts - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (with new brake, new bearings) The machine is in our warehouse and can be inspected under power. The pictures attached are original images of the machine. The machine is CE marked. This "CE" corresponds to the state of 1998 (first overhaul).

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, įėjimo įtampa: 400 V, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 03/2023 by Wiemers AG General Information / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" certification Tensile force: 40 kN (4,000kg) Broaching speeds: 3m/min and 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / Work area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Drive unit with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric monitoring of the clamping jaws (tool removal control to prevent accidental return of the drawbridge) - Integrated coolant system with solenoid valve (operated by swiveling system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (cross-machine reproducible) - 4 centralized lubrication points for the trapezoidal spindle drive - Enclosed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting connector) Fpjdpfsw H Dgnjx Afdeh Remarks: The machine has been completely overhauled, the machine body has been fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals have been renewed The coolant system (pump, check valve, and drain valve) including coolant/lubricant swiveling system is new - Coolant supply is controlled by a solenoid valve, switchable via the swiveling system - The drawbridge, clamping jaws, and rack segments are new - A deactivatable clamping jaw monitoring has been installed (additional safety for operator & tool breakage) - Safety door with interlock, signal indicator, and door lock - The tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches have been installed - Complete electrical system (control cabinet) is new - No PLC installed, machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - Machine has been newly painted with 2-component structural paint General The twin spindle drive ensures smooth and central pulling force as well as constant broaching speed (broaching speed selectable at 3m/min or 6m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyway slots. Thanks to the universally designed drawbridge and machine table, broaching with profile and flat broaching tools is possible without the use of additional pull heads.

Gamybos metai: 1962, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 10,000 kg Broaching length: 1,200 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Holder diameter for broach heads: 3 x Ø ___mm Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Fpodpfx Afst Dwb Djdsh Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in both the draw bridge and the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production. For optimal utilization, it ideally requires a foundation (pit) or alternatively a platform. Broach heads and mandrel ejectors are available upon request. The machine can be inspected at our warehouse.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1966, bendras svoris: 7 000 kg, įėjimo įtampa: 380 V, brošavimo ilgis: 1 500 mm, brochavimo pozicijų skaičius: 3, ruošinio skersmuo (maks.): 575 mm, bendras aukštis: 5 100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Fpjdpfx Afowql Rvodsh Weight: approx. 6,700 kg Machine no.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations drawing force: 20,000 kg broaching stroke: 1,500 mm broaching stations: 3 units spacing between broaching stations: 2x145 mm holder diameter for draw heads: 3 x Ø 85 mm passage width between columns: max. 580 mm cutting speed: hydraulically stepless, adjustable from 1 m/min up to max. 7 m/min return speed: hydraulically stepless, adjustable from 7 up to max. 25 m/min machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm height with tool feeder raised) power supply / connection load: 380 Volt 50 Hz / 14 kW Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the draw bridge and in the feeder. The machine is fitted with an integrated coolant system. Notes: The machine is designed for use in series production. For optimal operation, a foundation (pit) is ideally required, alternatively a platform. Draw heads and knockout units are available on request. The machine can be inspected under power at our warehouse. General Information: We constantly have a large selection of approx. 80 used broaching machines with drawing forces from 3,000 kg to 63,000 kg in both horizontal and vertical design in stock. A large part of our in-stock broaching machines is available for demonstration. On request we can offer you used equipment such as draw heads, knockouts, broaching tools and other specific accessories. As a contract broaching shop, we can also assist you with technical questions backed by 50 years of experience in broaching technology.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, bendras svoris: 480 kg, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, atbulinės eigos greitis: 100 mm/s, ruošinio skersmuo (maks.): 800 mm, bendras aukštis: 1 680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine by Wiemers SR 30 (100% compatible with Rausch RS 3) Pulling force: 30 kN (3,000kg) Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working surface: 430mm x 320mm / 340mm x 220mm Table aperture: Ø 90mm for standard broaching mandrels “System Rausch” Workpiece diameter: unlimited (removable coolant swing system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank) Dimensions (h x w x d): 1370mm X 680mm x 750 mm (h = table height from floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with interlock, safety query and safety monitoring - Easily removable chip chute with tool removal protection and parking facility - Externally adjustable tool length setting system (reproducible across machines) - Protective cover for the stroke adjustment and electrical control units - Oil-tight tray on the control cabinet Fpjdpfxow D E Two Afdsh - Electrical scanning of clamping jaws (tool removal control against unwanted return of the drawbridge, additional safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swing system with automatic coolant control via the swing system - Extra reinforced chip basket and chip sieve with magnet insert - Stainless steel operator panel with permanently durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for external control device (16-pin connector) - Preparation for automatic clamping jaw opening for profile broaching via roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic clamping jaw opener for easier tool removal during profile broaching - 3-sided open splash guard cabin (w x d x h) 700 x 350 x 600mm - External electrical control unit for broaching and return strokes as well as emergency stop Remark: The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4 and RS 6 series. All fixtures, tools and mandrels are fully usable. General The twin spindle drive ensures smooth and central pulling as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm (from 16mm groove tools only with stepped tool shanks). Thanks to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyway cutting. Through the universally designed drawbridge and machine table, both profile and flat broaching tools can be used. Profile broaching can be carried out without additional broaching heads, using simple centering bushings. Broaching tools and mandrels suitable for the machine are available upon request.

Būklė: naudotas, Gamybos metai: 1986, bendras svoris: 6 500 kg, galia: 42 kW (57,10 AG), įėjimo įtampa: 380 V, brošavimo ilgis: 1 600 mm, brochavimo pozicijų skaičius: 1, ruošinio skersmuo (maks.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine No.: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with a single broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Broaching stations: 1 unit! Passage width between cylinders: max. 540 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 8 m/min Return speed: hydraulically infinitely variable up to max. 18 m/min Space requirement of the machine: see machine layout diagram Power supply / Connected load: 380 Volt 50 Hz / 42 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is fitted with a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The tool feed system is hydraulically and mechanically locked. The machine features a coolant system with integrated chip conveyor, designed for installation in a pit. Remarks: The machine still has its original paint. It is designed for series production of medium and large batch sizes. For optimal use, a foundation (pit) is ideally required. Pull heads and needle ejectors are available on request. The machine can be inspected at our warehouse. General Information Fpjdjwqmaxjpfx Afdsh We always have a large selection of approximately 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg, available in both horizontal and vertical versions in stock. A large number of the broaching machines in stock are available for demonstration. If required, we can also offer you used equipment such as pull heads, needle ejectors, broaching tools and further specific accessories. As a contract broaching specialist with over 50 years of experience in broaching technology, we are also glad to assist you with technical questions.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, bendras svoris: 400 kg, įėjimo įtampa: 400 V, brošavimo ilgis: 1 000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400 kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 3, with “CE” marking Tensile force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard broaching mandrels “Rausch system” Workpiece diameter: any (removable coolant swivel system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm groove width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided protective enclosure) Fpodpow Huh Nofx Afdeh Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Safety door with monitoring circuit (emergency stop loop) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective cover for stroke adjustment and electrical switch units - Electrical detection of clamping jaws (tool removal control to prevent unintentional return of the drawbridge, added safety for operator & tool) - Integrated coolant system - Coolant swivel system (without electric switching function) - Three-sided closed splash guard hood with wide front opening for working area - Extra reinforced chip basket and chip strainer with magnetic insert - Stainless steel operator panel with durable labeling - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking by manufacturer (1995) Remarks: The machine has been overhauled; the machine body has been fully reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system including the coolant/lubricant swivel system is new - New 2-speed SEW gear motor - New electrics (Siemens) - New safety door instead of light curtain - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, strainer, and spindle guard, are new - Stainless steel operator panel with durable labeling - Machine is newly painted with 2-component structural lacquer The machine features “CE” marking by the manufacturer. General: The dual spindle drive ensures a steady and central pulling point as well as constant broaching speed. The machine is primarily designed for the production of keyways up to 18 mm (from 16 mm groove width only with stepped tool shanks). The machine, by design, is quick and easy to set up for broaching with flat broaching tools for keyway production. Due to the universally constructed drawbridge and machine table, both profile and flat broaching tools can be used without additional pullers.

Gamybos metai: 1986, būklė: beveik kaip naujas (naudotas), Weitere Informationen auf Anfrage Fjdpfxshmfnhj Afdoph

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Tipo: HRA4/80-4 Fodohmfh Hspfx Afdeph Tubos: Ø 6 ÷ 24 mm, espesor de pared = 1 ÷ 2,5 mm • Punta: Ø3 ÷ 12 mm

Būklė: naudotas, Gamybos metai: 1990, maks.: traukos jėga 25 000 kg maks.: įrankio ilgis 3520 mm Fedpocm Eiwefx Afdeph maks.: pjovimo greitis 9,6 m/min praėjimo plotis: 520 mm Mašina buvo naudojama švaistikliams ir švaistiklio dangteliams apdirbti. Mašina skirta masinei gamybai (našumas: 400 detalių/val.)

Gamybos metai: 2011, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įrankio eiga: 0–315 mm Smūgių per minutę: 14–60 Stūmoklio reguliavimas: 235 mm Fpedpfx Aovfctfofdjh Galvos pasukimo kampas: ±45° Atstumas nuo galvos iki stalo: 510 mm Atstumas nuo įrankio iki kolonos: 460 mm Sukamojo stalo skersmuo: 450 mm Sukamojo stalo centrinės kiaurymės skersmuo: 80 mm Fiksuotų sukamųjų stalo padėčių skaičius: 24 Stalo išilginis poslinkis: 265 mm Stalo skersinis poslinkis: 200 mm Savarankiškai stabdantis pagrindinis variklis: 4 kW / 5,5 AG Svoris: 1310 kg Bendri matmenys: 1000 x 1500 x 2250 mm

Būklė: naujas, Gamybos metai: 2026, Brand new precision vertical slotting machine - a machine of exceptionally high quality. CNC-controlled vertical slotting machine with two, three (or four) CNC axes and an electronically controlled rotary table with a positioning accuracy of 0.001°. Designed for efficient manufacturing of keyways (including tapered and tangential keyways) – spline hubs, internal and external gearings, racks, etc. CNC control system with a 10" color screen and touchscreen – software for roughing, finishing, and fine finishing (allowing for the highest surface quality grades). Stroke range of the slotting slide: 10 to 250 mm Slotting slide speeds: 22 to 90 strokes/min, steplessly adjustable Slotting slide swivel range: +/- 20° Rotary table diameter: 450 mm Bore in rotary table: Ø 135 mm Maximum table load: 1,250 kg Table travel (longitudinal and cross): 250 x 225 mm Drive power, servo motor for slotting slide: 3 kW Dimensions of the machine without control console: 1.3 x 1.45 m x approx. H 2.6 m Weight of the machine: approx. 1,700 kg - Automatic, electronically monitored central lubrication system for the guideways - Cutting oil system for slotting tool cooling and lubrication Fedpfx Afey Afu Ssdsph Other models available.

Būklė: geras (naudotas), Sveiki,\n\nParduodama obliavimo staklės HOV-2S tipas\n\nĮrenginys veikiantis, nuolat eksploatuojamas, galima apžiūrėti ir patikrinti.\n\nSkelbime nurodyta kaina yra be PVM, prie kurios turėtų būti pridėtas PVM.\n\nĮrangą galima apžiūrėti Starachowicuose, Kwiatkowskio g. 13.\nTelefoninis kontaktas nuo 7:00 iki 16:00. Fsdpsxyi Sasfx Afdoph

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1970, feed 300MM max width 32MM tooling Fodpsv D Dxtofx Afdeph

Gamybos metai: 1980, būklė: naudotas, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min Fpsdpfx Afscdtpljdsh max. workpiece diameter: 320 mm broaching stations: 3 pcs weight: 4.8 t automatic tool feeder hydraulic clamping for drawing head and end piece holder automatic loading device for workpieces up to 100 mm diameter magnetic strip chip conveyor

Gamybos metai: 1960, būklė: naudotas, max. pulling force: 20,000 kg Fpjdpfxoui Sbs Afdoh max. lift: 1,250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min max. workpiece diameter: approx. 140 mm max. tool diameter: approx. 50 mm broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine features an automatic tool feeder and is designed for manual series production. The tool locking mechanism in the pull bridge, as well as in the tool feeder, operates via spring mechanism (pull head DIN 1417).

Gamybos metai: 1959, būklė: naudotas, max. Zugkraft: 16 t max. Hub: 1250 mm Fodo Rwa Uspfx Afdoph Schnittgeschwindigkeit: 5.6 m/min Rücklaufgeschwindigkeit: 30 m/min

Gamybos metai: 1956, būklė: naudotas, mašinos/transporto priemonės numeris: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine No.: 1413 General information / Technical data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition Pulling force: 13,000 kg (maximum) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Clamping diameter of pull head: Ø 85 mm Passage width between cylinders: max. 390 mm Fjdpfx Ajdbmgmjfdoph Cutting speed: hydraulically and steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically and steplessly adjustable from 7 m/min to max. 25 m/min Machine dimensions (W x D x H): approx. 1150 x 1500 x 3725 mm (tool feeder extended) Power supply / Connected load: 380 Volt 50Hz / 7.5 kW Accessories / Special equipment: The traverse of the machine is equipped with 3 broaching tool holders, while the workpiece table has 1 broaching station (modifiable). The tool clamping system as well as the tool feeder are designed for a spring-actuated locking mechanism (DIN 1415). The machine is fitted with an automatic tool feeder; the available feeder mount is suitable for just one tool (center broaching station). The machine is equipped with an integrated coolant system for cutting oil. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production with medium batch sizes. The machine features an automatic cycle. For operation, ideally a machine pit or alternatively a pedestal is required. Pull heads, tool holders & tools are available upon request. The machine can be inspected under power at our warehouse.

Gamybos metai: 1951, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal broaching machine, in good, operational condition Broaching stroke: 1500 mm Broaching stations: 1 unit Tensile force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm width Thru-hole in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by the oil and chip tray) Cutting speed: hydraulically continuously adjustable from 2 m/min to 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • The machine includes an integrated coolant-lubrication system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for producing keyways and profiles. The machine runs smoothly and is clean in the area of the guides and cylinder. On request, broaching needles as well as broaching mandrels can be supplied. The machine is available for demonstration under power in our warehouse. Fpedjdcdrpjpfx Afdjh

Gamybos metai: 1980, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25 x 2500 x 500 Year of Manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic broaching machine with 3 broaching stations, in very good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Broaching stations: 3 units Fpedpfx Aedffzfefdoh Distance between broaching stations: 160 mm Clamping diameter of draw heads: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connection rating: 380V / 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. Previously, a sliding workpiece table was mounted on the machine, equipped with a special external broaching clamping device (workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic lock both in the draw bridge and the feeder. The machine is fitted with a coolant unit including integrated chip conveyor. Remarks: The machine is in very good condition and retains its original paint. It is designed for use in series production, ideally requiring a foundation (pit) for optimal operation. Draw heads and ejector needles are available on request. The machine can be inspected in our warehouse.

Gamybos metai: 1958, būklė: naudotas, mašinos/transporto priemonės numeris: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2,500 kg Fpsdpfxoda Ugio Afdeh General / Technical Data: Used vertical hydraulic internal broaching machine with 1 broaching station, fully operational. Tensile force: 6,000 kg Broaching length: 1,000 mm Draw head diameter: Ø 85 mm Passage width between cylinders: max. 280 mm Cutting speed: hydraulically variable, stepless from 1 m/min up to max. 7 m/min Return speed: hydraulically variable, stepless from 7 m/min up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / Connected load: 380 Volt, 50 Hz / 4 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 1 broaching station. The tool clamping system is designed for mechanical spring locking (DIN 1415). An integrated coolant system is included. The machine features a double draw head for two flat broaching tools with workpiece support plate. Remarks: The machine is in age-appropriate good condition and ready for immediate use. It is designed for manual operation in medium-batch production. Installation ideally requires a machine pit or, alternatively, a platform. Draw heads are available on request. The machine does not have a tool loader. The machine can be inspected under power at our warehouse.

Gamybos metai: 1982, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 3120, Manufacturer: Varinelli Milano, Italy Model: BV 25 x 2000 x 630 Fjdpfxjd I R Nge Afdoph Year of manufacture: 1982 Machine No.: 3120 Weight: 13,000 kg General / Technical Data: Vertical hydraulic internal broaching machine with 3 broaching positions and a movable workpiece table, in good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching positions: 3 units Distance between broaching positions: 200 mm Passage width between cylinders: max. 630 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 9 m/min Return speed: hydraulically infinitely variable up to max. 18 m/min Machine footprint: see machine layout plan (image) Power supply / Connected load: 380 Volt, 50 Hz / 43 kW Accessories / Special Equipment: The machine is equipped with a workpiece sliding table for 3 broaching positions. The tool clamping system is fitted with a spring-actuated lock (DIN 1417) in the pull bridge. The tool feeder system is locked hydraulically and mechanically. The machine features a coolant system with integrated chip conveyor for installation in a pit. Remarks: The machine is in good condition and retains its original paint. It is designed for use in series production of medium to large batch sizes; for optimal operation, a foundation (pit) is ideally required. Pull heads and ejectors are available upon request. The machine can be inspected at our warehouse.

Gamybos metai: 1971, būklė: naudotas, General / Technical Data: Manufacturer: Forst Model: RSIA-20-1320 Year of manufacture: 1971 Weight: 6,000 kg Pulling force: 20 t Fedpelwu Spjfx Afdjph Broaching speeds: 5 m/min Return speed: 16 m/min Maximum stroke: 1,320 mm Broaching stations: 3 Clamping area: 370 x 620 x 105 mm Note: The machine is powered in our warehouse and can be inspected.

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1733, Vertical internal broaching machine with index plate by Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW Fedpfx Ajgyd S Sjfdeph The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1994, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Fodpfx Ajgyd T Eefdjph Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Power Supply: 400V / 50Hz