Praplėtimo mašina

Wiemers SR 30

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, mašinos/transporto priemonės numeris: WAG 3102, Vertical Internal Broaching Machine Rausch / Wiemers SR 30 (WAG 3102) Tedpfxev Rpnme An Hsc Manufacturer: Rausch / Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480kg Overhauled: 11/2024 by Wiemers AG General / Technical Data: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused, with “CE” marking Tensile force: 30 kN (3,000kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Max. stroke: 1000mm Max. tool length: 1200mm Table dimensions / working area: 430mm x 320mm / 340mm x 220mm Table bore: Ø 90mm for standard broaching mandrels “Rausch system” Workpiece diameter: unlimited (removable coolant swivel system) Broaching capacity / keyway width: up to 20mm in steel (for broaching tool widths from 16mm only with stepped tool shank) Dimensions (H x W x D): 1370mm x 680mm x 750mm (H = table height to floor without assembly) Motor: 2.5kW/3.0kW, 2-speed, for 2 working speeds Power supply: 400V / 50Hz Specification: - Gear motor drive with 2 working speeds - Modified drive system, Wiemers “SR” version - Reinforced drawbridge made of tool steel for increased tensile forces - Safety door with door interlock, safety query and monitoring - Removable chip chute with tool deposit facility - Externally adjustable tool length setting system (reproducible across machines) - Protective cover for stroke adjustment and electrical switch units - Oil-tight tray on control cabinet - Electrical sensing of clamping jaws (prevents inadvertent return movement of drawbridge for additional operator & tool safety) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swivel system with automatic switching via the swivel mechanism - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical interface for external control element (16-pin connector) - Preparation for automatic clamping jaw opener for profile broaching (via roller lever) - Machine documentation with CE Declaration of Conformity Optional Extras: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open three-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electric control unit for broaching and return stroke, plus emergency stop function Note: The machine is completely overhauled. During the overhaul, the machine base, machine body, and machine table were fully refurbished. All other components have been renewed. The drive system has been modified. The machine has been brought up to current technical standards and complies with the latest “CE” regulations (as of 2024). General The double-spindle drive provides smooth operation, a central pulling force, and a constant broaching speed. The machine is mainly designed for the production of keyways up to 20mm (for broaching tools from 16mm only with stepped tool shanks). The machine’s design enables quick and easy setup for broaching with flat broaching tools for keyway production.

Būklė: naudotas, Räummaschine Tsdpfet Hr Dfsx An Hsc

Gamybos metai: 1991, būklė: paruoštas naudoti (naudotas), Y 018 Broaching Machine – Vertical Manufacturer: Hönnema Model: HSR 9/1250 RST Machine Number: 166/HM 510275 Year of Manufacture: 1991 Tedpohf A I Nefx An Hec Pulling Force: 9 tons Stroke: 1,250 mm Footprint: approx. 230 x 120 cm With automatic feed External broaching possible with device

Būklė: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 17065, Manufacturer: Henning Model: U6/1000 Machine No.: 17065 Year of Manufacture: 1979 Weight: 1,100 kg Tsdpfxjup Uzfs An Hsc General / Technical Data: Used mechanical vertical broaching machine Henning, in operational condition Pulling force: 6,000 kg (60 kN) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / Working area: 600 x 460 mm / 480 x 340 mm Table opening: Ø 170 mm with eccentric table insert with Ø 90 mm hole for standard broaching mandrels (Rausch system) Workpiece diameter: unlimited Dimensions (H x W x D): 1,650 mm x 1,200 mm x 700 mm (H = table height from floor without superstructure) Motor: 7.4 / 10 kW Power supply: 380 Volt / 50 Hz Accessories / Special Features: - Integrated coolant system - Return circuit with dual-operation mode - Machine documentation - Automatic jaw opener in the lower pull bridge position (tool removal) - Tool clamping with universal jaws for flat shanks according to DIN 1416 BL 6 Remarks: The machine is in its original condition, functionally tested. The machine is mechanically driven via a trapezoidal-thread spindle and a geared motor. Unlike most mechanically driven broaching machines where the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. This ensures extra column guidance and very robust construction. The dual-spindle drive is ideal for continuously consistent cutting speeds, even at higher pulling forces. The machine is stored at our warehouse and can be inspected under power.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Refurbished mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: arbitrary Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height from floor without attachments) Todsw Ighispfx An Hec Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine have been carried out: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (in emergency stop circuit) - Machine paneling below the safety door with chip protection and tool storage area - Electrical sensing of the clamping jaws (tool removal control to prevent unintentional return of the drawbridge) - Coolant swivel system with controlled solenoid valve during the swiveling process (for activating coolant before starting the broach stroke » optical lubrication flow inspection, no dry cutting!) - Routing of electrical cables in steel protective ducts - Heavy-duty control cabinet mounting for accommodating machine components - Additional oil-tight tray on the control cabinet - 3-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with permanent labeling - 4 central lubrication points for the trapezoidal spindle drive Remarks: The machine has been fully overhauled; the machine body is completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, solenoid valve, and drain valve), including coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All sheet metal and panels are new - The following components have been overhauled and reused: - Machine base - Machine stand - Machine table with table inserts - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (with new brake, new bearings) The machine is in our warehouse and can be inspected under power. The pictures attached are original images of the machine. The machine is CE marked. This "CE" corresponds to the state of 1998 (first overhaul).

Būklė: geras (naudotas), Gamybos metai: 1995, 1 naudota hidraulinė CNC griovelių pjovimo staklės Gamintojas: Leistritz Tipas: Polymat 50/400 Pagaminimo metai: 1995 CNC griovelio plotis: 50 mm Didžiausias eiga: 400 mm Gręžinio skersmuo: 10–350 mm Tempiamoji jėga: 15,9 kN Todpfx Aey I R N Ssn Hjc Didžiausias ruošinio išorinis skersmuo: 500 mm Stalo dydis: 550 x 675 mm Pjovimo greitis: 20 m/min Grįžimo greitis: iki 40 m/min Staklių svoris: apie 1.400 kg

Būklė: labai geros būklės (naudotas), Keyseating machine Hydraulic Make: Polymat Model: 50/400 Keyway width: 3–50 mm Bore diameter: 13–500 mm Maximum stroke length: 400 mm Drawing force: 3 MP Table load capacity: 10 t Cutting speed: infinitely adjustable from 0–20 m/min 11 feeds from 0.01–0.15 mm 380 volts 5.5 kW Accessories: Tedpfx Anowxvb Ij Hoc - various broaching knives - extended clamping table 700 x 700 mm - jib for setting down the knife guide bar - operating manual - electrical schematic Transport dimensions: L: 1500 mm W: 1100 mm H: 2340 mm Weight: 2200 kg

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, įėjimo įtampa: 400 V, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 03/2023 by Wiemers AG General Information / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" certification Tensile force: 40 kN (4,000kg) Broaching speeds: 3m/min and 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / Work area: 540 x 340mm / 450 x 250mm Todpow H Dgnefx An Hsc Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Drive unit with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric monitoring of the clamping jaws (tool removal control to prevent accidental return of the drawbridge) - Integrated coolant system with solenoid valve (operated by swiveling system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (cross-machine reproducible) - 4 centralized lubrication points for the trapezoidal spindle drive - Enclosed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting connector) Remarks: The machine has been completely overhauled, the machine body has been fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals have been renewed The coolant system (pump, check valve, and drain valve) including coolant/lubricant swiveling system is new - Coolant supply is controlled by a solenoid valve, switchable via the swiveling system - The drawbridge, clamping jaws, and rack segments are new - A deactivatable clamping jaw monitoring has been installed (additional safety for operator & tool breakage) - Safety door with interlock, signal indicator, and door lock - The tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches have been installed - Complete electrical system (control cabinet) is new - No PLC installed, machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - Machine has been newly painted with 2-component structural paint General The twin spindle drive ensures smooth and central pulling force as well as constant broaching speed (broaching speed selectable at 3m/min or 6m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyway slots. Thanks to the universally designed drawbridge and machine table, broaching with profile and flat broaching tools is possible without the use of additional pull heads.