Brošavimo staklės

Rausch RS4/1000

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, įėjimo įtampa: 400 V, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 03/2023 by Wiemers AG General Information / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" certification Tensile force: 40 kN (4,000kg) Broaching speeds: 3m/min and 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / Work area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Drive unit with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric monitoring of the clamping jaws (tool removal control to prevent accidental return of the drawbridge) Hjdpfow H Dgnox Am Tenu - Integrated coolant system with solenoid valve (operated by swiveling system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (cross-machine reproducible) - 4 centralized lubrication points for the trapezoidal spindle drive - Enclosed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting connector) Remarks: The machine has been completely overhauled, the machine body has been fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals have been renewed The coolant system (pump, check valve, and drain valve) including coolant/lubricant swiveling system is new - Coolant supply is controlled by a solenoid valve, switchable via the swiveling system - The drawbridge, clamping jaws, and rack segments are new - A deactivatable clamping jaw monitoring has been installed (additional safety for operator & tool breakage) - Safety door with interlock, signal indicator, and door lock - The tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches have been installed - Complete electrical system (control cabinet) is new - No PLC installed, machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - Machine has been newly painted with 2-component structural paint General The twin spindle drive ensures smooth and central pulling force as well as constant broaching speed (broaching speed selectable at 3m/min or 6m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyway slots. Thanks to the universally designed drawbridge and machine table, broaching with profile and flat broaching tools is possible without the use of additional pull heads.

Būklė: naudotas, Gamybos metai: 1998, Techninės specifikacijos: Padangos profilio aukštis: 180 mm Šlifavimo disko maksimalus skersmuo: 200 / puodelio formos diskas mm Šlifavimo disko skylės skersmuo: nurodoma atskirai Šlifavimo veleno sukimosi greitis: 2800 aps./min. Stalo dydis: ilgis x plotis: 500 x 160 mm Darbinė įtampa: 220 / 380 V Bendrasis energijos poreikis: 3,0 kW Apytikslis mašinos svoris: 0,57 t Apytikslės mašinos matmenys: ilgis x plotis x aukštis: 1,28 x 1,0 x 1,75 m Skirta galinių paviršių šlifavimui (puodelio formos šlifavimo staklės) Magnetinis laikiklis: ilgis x plotis = 680 x 200 mm; galima pakreipti apie 15°; galima pasukti 360° radialiniu masteliu Hsdsu Ngrqjpfx Am Tonu Magnetas: S2D tipas; nuolatinis magnetas, paviršiaus plotas 300 x 150 mm Šlifavimo disko laikiklis: - vertikalaus padėties reguliavimas = 180 mm ilgio, rankinis; pasvirimo reguliavimas = apytiksliai 45° į kairę/dešinę, rankinis Valdymas atliekamas per valdymo skydą ant mašinos. Aušinimo skysčio talpa su pompa ir tiekimo sistema.

Būklė: naudotas, Gamybos metai: 1968, Roller diameter: 500 mm Throat depth: 1050 / 485 mm Workpiece height: 300 mm Hnsdpfx Amjiqp Ers Tsu Saw band length: 3920 - 4050 mm Cutting speed: 15 - 940 m/min Table height: 1040 mm Table area: 750 x 800 mm Table tilt: 15 degrees Total power requirement: 4.0 kW Machine weight approx. 1750 kg Space requirement approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angle - Mitre adjustment via lockable indexing every 15° - Saw band adjustable for optimal cutting angle - Hydraulic vice on both sides - Electric band breakage monitoring system - Smooth-running saw carriage guided by preloaded linear ball guides - Additional table 450 x 450 mm - Machine lamp

Būklė: geras (naudotas), Gamybos metai: 2007, Gamintojas: Volz BMT Pagaminimo metai: 2007 Valdymas: konvencinis su skaitmeniniu ekranu (DRO) Kilmės šalis: Taivanas Sukimosi skersmuo: 660 mm Maks. tekinimo ilgis: 2000 mm Hnedpfsx Uw S Hex Am Tou Veleno anga: 85 mm Veleno tvirtinimas: D1-8 Veleno variklis: 7,5 kW Veleno sukimosi greitis: 17–1200 aps./min su lunete su skaitmeniniu ekranu (DRO) sriegimo funkcija

Būklė: naudotas, Techninės detalės: Veleno perėjimas: 60 mm Sukimosi ilgis: 45 mm Sukimosi skersmuo: maks. 56 mm Gręžimo gylis: maks. 70 mm Sukimosi greitis: 48 - 1500 (velenas) aps./min. Sriegiavimas: Sukimosi greitis: 24 - 750 aps./min. Įrankio revolveris - stočių skaičius: 8 Bendra galia: 5,5 kW Staklių svoris apie: 2,4 t Užimamas plotas apie: Išmatavimai: 2,1 x 1,0 x 1,8 m Hnodpeu Iwyisfx Am Tsu Kreive valdoma tekinimo automatika pagal šabloną. Ruonis apkabinamas per tvirtinimo patrontą. Revolverinė galvutė: Diskinis revolveris Hahn & Tessky Esslingen, įrankio eiga 80 mm, reguliavimas 36 mm, atstumas tarp tvirtinimo galvutės ir revolverio min./maks.: 72/188 mm 2 vnt. sukimo atramų, darbo eiga 45 mm 2 vnt. atpjovimo atramų, darbo eiga apie 40 mm Aušinimo skysčio sistema Staklės neprijungtos. Parduodama už siūlomą kainą.

Būklė: naujas, Gamybos metai: 2026, - Capacity: 2070 x 6 mm Hodpfxslht N Is Am Tenu - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Centralized lubrication system - Brake motor - Emergency stop - Documentation - 400V

Būklė: naudotas, Gamybos metai: 2006, X-axis travel: 600 mm Y-axis travel: 270 mm Z-axis travel: 430 mm Upper slide travel: 630 mm Table size: 1120 x 270 mm Spindle speeds: 45 - 1660 rpm Spindle taper: SK 40 Control: conventional Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Machine weight approx. 1.35 t Dimensions (L x W x H): 1.8 x 1.4 x 1.8 m Machine is equipped with: Hjdpfxsv Sdz Re Am Tsnu - Digital readout - Machine lamp - Coolant system - Machine mounts/feet

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Kellenberger apvalių paviršių šlifavimo staklės labai geros būklės. Parduodamos už palankią kainą. Kaina ženkliai sumažinta !!!!! Hnedpfew Dy Rqex Am Tou

Gamybos metai: 1963, būklė: paruoštas naudoti (naudotas), Maks. formavimo jėga: 80t, prijungimo galia: 3,5kW, srovės tipas: 3 fazės, dažnis: 50Hz, darbinė įtampa: 380V, valdymo įtampa: 24V, įrenginio vardinė srovė: 10A, įvadinio saugiklio vardinė reikšmė greitas: 25A, lėtas: 15A, svoris: 1,79t. Su dokumentacija, be priedų ar atsarginių dalių. Reguliariai prižiūrėta, įrenginyje yra gedimas – greičio reguliavimas visiškai neveikia. Galima apžiūrėti vietoje. Hodpoy A Smbofx Am Tjnu

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: SH-250, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 250 t, eigos ilgis: 450 mm, darbinis greitis: 4 mm/s, atbulinės eigos greitis: 8 mm/s, bendras ilgis: 3 000 mm, bendras plotis: 2 000 mm, bendras aukštis: 1 700 mm, Įranga: dokumentacija / vadovas, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal ram hydraulic press is designed with a range of three different capacities from 100 to 250 tonnes. The horizontal hydraulic presses are specifically engineered for straightening and bending work on profiles, bars, and beams. Hnsdpfowk Hkqox Am Tju The horizontal design of the machine allows easy handling of large beams and profiles. The latest generation HS series horizontal hydraulic press has evolved to provide versatile functionality, such as the possibility to fit a wide variety of tooling. They operate with a hydraulic pressure of less than 350 BAR to ensure maximum longevity of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature a C-frame structure, fully welded and manufactured exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. All calculations and designs are made using finite element software. This allows us to consistently guarantee our high standards of robustness, precision, and quality. The presses are equipped with an anti-rotation main push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment also includes support blocks made from C45E steel. Two height-adjustable side support rollers are supplied as standard, one on each side. PAGE 2/4 CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed tube, chromed piston rod, and maintenance-free wear guides. Cylinder operated by a lever-controlled hydraulic distributor. It features a removable block to prevent piston wear. Single-speed motorized hydraulic unit. ELECTRICAL INSTALLATION AND SAFETY Electrical installation includes a motor protection switch and emergency stop. Supplied with a glycerine manometer with tonnage reading and hydraulic oil. Complies with and meets all essential health and safety requirements according to CE regulations. Supplied with an instruction manual. OPTIONAL ACCESSORIES • Basic feed rails from 3,000 mm up to 12,000 mm with adjustable height. • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic lifting and tilting of feed rails. • 415 mm long folding unit. PROMECAM clamping system. • Additional single-speed manual pump, allows both manual and motorized operation modes. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation and electric foot pedal control. • Two-speed hydraulic unit. • Custom geometry to suit your requirements.