Smūgio, traukimo ir reikminės staklės pirkti naudotą (170)

Gamybos metai: 1968, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800kg Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled mechanical vertical broaching machine Rausch RS 6G, unused, with "CE" marking Pulling force: 60 kN (6,000kg) Broaching speeds: 3m/min and 6m/min Return speed: 6m/min Max. stroke: 1000mm Max. tool length: 1200mm Table size / working area: 610x470mm / 520x320mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 1600mm x 850mm x 1000mm (H= height from table to floor, excluding attachments) Motor power: 4.4kW / 5.5kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool rest - Protective cover for stroke adjustment - Oil-tight tray on the control cabinet - Electrical monitoring of clamping jaws (tool removal control to prevent unintended retraction of the pull bridge; additional safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain - Swiveling coolant supply system, with automatic coolant switching via the swivel system - Chip basket with magnet - Externally adjustable tool length setting system (repeatable across machines) - Stainless steel control panel with permanent labeling - 4 central lubrication points for the trapezoidal spindle drive, with manual grease gun Remarks: The machine has been completely overhauled. During the overhaul, the machine base, body, and table have been fully reconditioned. All wear parts have been replaced. The machine has been brought up to the current state of the art and complies with current "CE" regulations. The machine is marked with a "CE" certificate. Iasdpsv Rmvzsfx Aauor General: The double spindle drive ensures smooth, central pulling action and constant broaching speed (broaching speed selectable at 3m/min or 6m/min). By design, the machine can be set up quickly and easily for broaching with flat broaches, particularly for keyway cutting. Thanks to the universally designed pull bridge and machine table, both profile and flat broaches can be used without the need for additional pull heads. Broaching tools and mandrels suitable for the machine are available on request.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: approx. 1960 Type: horizontal broaching machine Model: RH 10-50 Machine No.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine, in good condition for its age, with a manually operated heavy-duty tool feeder. Broaching stroke: 1,500 mm Tensile force: 10,000 kg (100 kN) Holder in traverse: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface / workpiece area: Ø 460 mm Maximum workpiece diameter: approx. 750 mm (limited by the tool feeder's tray) Cutting speed: hydraulically variable, from 1.0 m/min to 7 m/min Return speed: hydraulically variable, from 5 m/min to 30 m/min Machine footprint (W x D x H): approx. 6,500 mm x 950 mm x 1,400 mm (without working area) Iajdor A Hdgjpfx Aaujr Power supply: 380 Volt, 50 Hz Connected load: 8 kW Equipment: • Machine is equipped with mechanical-hydraulic control for broaching and return stroke • Integrated coolant and cutting fluid system • Manual tool feeding • Broaching carriage with pull head holder is guided flat on both sides • Adjustable tensile force limiter Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width • Adapter sleeve for traverse from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for manufacturing keyways using flat broaching tools as well as for profile broaching. Due to the machine bed and robust tool feeder, the machine is well suited for heavy-duty profile broaching tools. The machine is used and, in view of its age, in very good condition. It is currently stored in our warehouse and can be inspected under power. The machine has not been refurbished technically or visually, but is ready for immediate use. Profile broaching pull heads are mostly available used upon request, depending on DIN standard, dimensions, and stock. Direct contact details and further information can be found in the attached PDF document.

Gamybos metai: 1964, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Isdpfx Aot Dv I Aoauear Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Mounting diameter for pull heads: 3 x Ø ___ mm Cutting speed: hydraulically infinitely variable from 1 m/min up to a maximum of 7 m/min Return speed: hydraulically infinitely variable from 7 up to a maximum of 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: The machine is equipped with a workpiece table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring mechanical locking in the pull bridge and hydraulic-mechanical locking in the feed. The machine underwent an electrical (Siemens S7 PLC) and mechanical retrofit in 2004. The unit is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation pit is recommended, or alternatively, a platform may be used. Pull heads and broach lifters are available upon request. The machine can be inspected at our warehouse.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1966, bendras svoris: 7 000 kg, įėjimo įtampa: 380 V, brošavimo ilgis: 1 500 mm, brochavimo pozicijų skaičius: 3, ruošinio skersmuo (maks.): 575 mm, bendras aukštis: 5 100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700 kg Machine no.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations drawing force: 20,000 kg broaching stroke: 1,500 mm broaching stations: 3 units spacing between broaching stations: 2x145 mm holder diameter for draw heads: 3 x Ø 85 mm passage width between columns: max. 580 mm cutting speed: hydraulically stepless, adjustable from 1 m/min up to max. 7 m/min return speed: hydraulically stepless, adjustable from 7 up to max. 25 m/min machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm height with tool feeder raised) power supply / connection load: 380 Volt 50 Hz / 14 kW Iedpfxswql Rvj Aausar Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the draw bridge and in the feeder. The machine is fitted with an integrated coolant system. Notes: The machine is designed for use in series production. For optimal operation, a foundation (pit) is ideally required, alternatively a platform. Draw heads and knockout units are available on request. The machine can be inspected under power at our warehouse. General Information: We constantly have a large selection of approx. 80 used broaching machines with drawing forces from 3,000 kg to 63,000 kg in both horizontal and vertical design in stock. A large part of our in-stock broaching machines is available for demonstration. On request we can offer you used equipment such as draw heads, knockouts, broaching tools and other specific accessories. As a contract broaching shop, we can also assist you with technical questions backed by 50 years of experience in broaching technology.

Būklė: naudotas, Gamybos metai: 1966, Max. pulling force 5 t, maximum stroke 850 mm, maximum cutting speed 12 m/min, maximum return speed 25 m/min, clamping surface 410x575 mm, slot width 3 - 90 mm, drilling diameter 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base below floor 1,400 mm. Isdpfxecm Elne Aauoar

Gamybos metai: 1985, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985, overhauled Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Pulling force: 10,000 kg at 3 m/min Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return stroke speed: hydraulically infinitely variable from 7 m/min to 30 m/min Maximum stroke: 1200 mm Broaching tool clamping: universal pull head for flat shanks up to 26 mm width Iajdpfx Ajixntwoauer Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table aperture: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Gamybos metai: 1961, būklė: naudotas, General / Technical Data: Vertical duplex external broaching machine with two tables Ijdpfxjlwu Hro Aausar Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 Weight: approx. 6,500 kg Tensile force: 10 t Broaching speeds: 1 - 11 m/min Return speeds: 7 - 25 m/min Maximum stroke: per machine unit 1,250 mm Clamping surface: 500 x 500 mm Passage width: 380 mm Power supply: 380 Volt / 50 Hz Note: The machine is connected to power at our warehouse and can be inspected.

Gamybos metai: 1960, būklė: nepatikrintas (naudotas), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Manufacturer: Forst Model: RF 20x2000 Year of manufacture: 1959 Iaodpfx Aashu E Egouor Maximum pulling force: 20 t Maximum stroke: 2000 mm Maximum cutting speed: 5.6 m/min Maximum return speed: 30 m/min Maximum workpiece diameter: Ø 300 mm Maximum tool diameter: Ø 90 mm Weight: 3.5 t Note: Supplied without chip tray.

Būklė: nepatikrintas (naudotas), Forst RF 16 Internal Broaching Machine -WKG 1371- Technical Specifications: Manufacturer: Forst Model: RF 16 Maximum Pulling Force: 16 t Maximum Stroke: 1200 mm Maximum Cutting Speed: 5.6 m/min Maximum Workpiece Diameter: Ø 700 mm Maximum Tool Diameter: Ø 120 mm Workpiece Mount Bore: Ø 70 mm Note: Control valve missing Iedpehu E N Defx Aaujar

Gamybos metai: 2024, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: WAG 3102, Vertical Internal Broaching Machine Rausch / Wiemers SR 30 (WAG 3102) Manufacturer: Rausch / Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480kg Overhauled: 11/2024 by Wiemers AG General / Technical Data: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused, with “CE” marking Tensile force: 30 kN (3,000kg) Broaching speeds: 3 m/min & 6 m/min Iaodjv Rpnmspfx Aauer Return speed: 6 m/min Max. stroke: 1000mm Max. tool length: 1200mm Table dimensions / working area: 430mm x 320mm / 340mm x 220mm Table bore: Ø 90mm for standard broaching mandrels “Rausch system” Workpiece diameter: unlimited (removable coolant swivel system) Broaching capacity / keyway width: up to 20mm in steel (for broaching tool widths from 16mm only with stepped tool shank) Dimensions (H x W x D): 1370mm x 680mm x 750mm (H = table height to floor without assembly) Motor: 2.5kW/3.0kW, 2-speed, for 2 working speeds Power supply: 400V / 50Hz Specification: - Gear motor drive with 2 working speeds - Modified drive system, Wiemers “SR” version - Reinforced drawbridge made of tool steel for increased tensile forces - Safety door with door interlock, safety query and monitoring - Removable chip chute with tool deposit facility - Externally adjustable tool length setting system (reproducible across machines) - Protective cover for stroke adjustment and electrical switch units - Oil-tight tray on control cabinet - Electrical sensing of clamping jaws (prevents inadvertent return movement of drawbridge for additional operator & tool safety) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swivel system with automatic switching via the swivel mechanism - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical interface for external control element (16-pin connector) - Preparation for automatic clamping jaw opener for profile broaching (via roller lever) - Machine documentation with CE Declaration of Conformity Optional Extras: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open three-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electric control unit for broaching and return stroke, plus emergency stop function Note: The machine is completely overhauled. During the overhaul, the machine base, machine body, and machine table were fully refurbished. All other components have been renewed. The drive system has been modified. The machine has been brought up to current technical standards and complies with the latest “CE” regulations (as of 2024). General The double-spindle drive provides smooth operation, a central pulling force, and a constant broaching speed. The machine is mainly designed for the production of keyways up to 20mm (for broaching tools from 16mm only with stepped tool shanks). The machine’s design enables quick and easy setup for broaching with flat broaching tools for keyway production.

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 60305, General Information / Technical Data: Manufacturer: Rausch Model: RS6 / 1000 Year of manufacture: 07/2000 Machine no.: 60305 Weight: approx. 750 kg Pulling force: 60 kN (80 kN) Broaching speed: 4 m/min Return speed: 8 m/min Max. stroke: 1000 mm Maximum tool length: 1200 mm Iodpoiqkb Refx Aauoar Maximum workpiece diameter: approx. Ø 900 mm Table bore: Ø 90 mm for standard broaching mandrels Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height from floor without attachments) Power supply: 400 Volt / 50 Hz – 6 / 7.5 kW Accessories / Special Equipment: – Electric jaw monitoring (tool removal control to prevent unintended return of the pull bridge) – Integrated coolant system with check valve and drain tap – Patented coolant/lubricant swing system (retrofit) Note: The machine has the manufacturer's CE marking. The machine is powered in our warehouse and can be inspected.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, įėjimo įtampa: 400 V, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 03/2023 by Wiemers AG General Information / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" certification Tensile force: 40 kN (4,000kg) Broaching speeds: 3m/min and 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / Work area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Drive unit with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric monitoring of the clamping jaws (tool removal control to prevent accidental return of the drawbridge) - Integrated coolant system with solenoid valve (operated by swiveling system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (cross-machine reproducible) - 4 centralized lubrication points for the trapezoidal spindle drive - Enclosed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting connector) Remarks: The machine has been completely overhauled, the machine body has been fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals have been renewed The coolant system (pump, check valve, and drain valve) including coolant/lubricant swiveling system is new - Coolant supply is controlled by a solenoid valve, switchable via the swiveling system - The drawbridge, clamping jaws, and rack segments are new - A deactivatable clamping jaw monitoring has been installed (additional safety for operator & tool breakage) - Safety door with interlock, signal indicator, and door lock - The tool length setting system has been relocated outside the machine enclosure Iodpfx Aaow H Dgnouoar - Additional end position limit switches have been installed - Complete electrical system (control cabinet) is new - No PLC installed, machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - Machine has been newly painted with 2-component structural paint General The twin spindle drive ensures smooth and central pulling force as well as constant broaching speed (broaching speed selectable at 3m/min or 6m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyway slots. Thanks to the universally designed drawbridge and machine table, broaching with profile and flat broaching tools is possible without the use of additional pull heads.

Gamybos metai: 1989, būklė: naudotas, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 Iedpfx Ajlu D Hksausar General / Technical Data: CNC Keyseating Machine with indexing and/or rotary table for helical keyways. Max. stroke: 1250 mm Cutting speed: stepless, from 0 to 16 m/min Max. return speed: 16 m/min Max. keyway width: 63 mm Fully automatic helical indexing device: RA 450 AUDR Note: The feed is driven by a stepper motor and ball screw via the machine table. The machine table features a robust and smooth-running linear guideway. The machine is positioned approx. 1,500 mm below floor level! The machine is powered in our warehouse and can be inspected.

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1732, Vertical internal broaching machine with index plate by Karl Klink Model: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Iedogyd Svjpfx Aaujar Rated current: 15 A Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1964, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 2041, Vertical internal broaching machine with index plate by Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition. Iaodsgyd S Dspfx Aauor

Gamybos metai: 1962, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 10,000 kg Broaching length: 1,200 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Holder diameter for broach heads: 3 x Ø ___mm Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in both the draw bridge and the feeder. The machine has an integrated coolant system. Iaedpjt Dwb Dofx Aauor Remarks: The machine is designed for use in series production. For optimal utilization, it ideally requires a foundation (pit) or alternatively a platform. Broach heads and mandrel ejectors are available upon request. The machine can be inspected at our warehouse.

Būklė: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 17065, Manufacturer: Henning Model: U6/1000 Machine No.: 17065 Year of Manufacture: 1979 Weight: 1,100 kg General / Technical Data: Used mechanical vertical broaching machine Henning, in operational condition Pulling force: 6,000 kg (60 kN) Broaching speeds: 3 m/min and 6 m/min Iaedpfoup Uzfox Aausr Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / Working area: 600 x 460 mm / 480 x 340 mm Table opening: Ø 170 mm with eccentric table insert with Ø 90 mm hole for standard broaching mandrels (Rausch system) Workpiece diameter: unlimited Dimensions (H x W x D): 1,650 mm x 1,200 mm x 700 mm (H = table height from floor without superstructure) Motor: 7.4 / 10 kW Power supply: 380 Volt / 50 Hz Accessories / Special Features: - Integrated coolant system - Return circuit with dual-operation mode - Machine documentation - Automatic jaw opener in the lower pull bridge position (tool removal) - Tool clamping with universal jaws for flat shanks according to DIN 1416 BL 6 Remarks: The machine is in its original condition, functionally tested. The machine is mechanically driven via a trapezoidal-thread spindle and a geared motor. Unlike most mechanically driven broaching machines where the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. This ensures extra column guidance and very robust construction. The dual-spindle drive is ideal for continuously consistent cutting speeds, even at higher pulling forces. The machine is stored at our warehouse and can be inspected under power.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Refurbished mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: arbitrary Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height from floor without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine have been carried out: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (in emergency stop circuit) - Machine paneling below the safety door with chip protection and tool storage area - Electrical sensing of the clamping jaws (tool removal control to prevent unintentional return of the drawbridge) - Coolant swivel system with controlled solenoid valve during the swiveling process (for activating coolant before starting the broach stroke » optical lubrication flow inspection, no dry cutting!) - Routing of electrical cables in steel protective ducts - Heavy-duty control cabinet mounting for accommodating machine components - Additional oil-tight tray on the control cabinet - 3-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with permanent labeling - 4 central lubrication points for the trapezoidal spindle drive Remarks: Iodow Ighijpfx Aaujar The machine has been fully overhauled; the machine body is completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, solenoid valve, and drain valve), including coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All sheet metal and panels are new - The following components have been overhauled and reused: - Machine base - Machine stand - Machine table with table inserts - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (with new brake, new bearings) The machine is in our warehouse and can be inspected under power. The pictures attached are original images of the machine. The machine is CE marked. This "CE" corresponds to the state of 1998 (first overhaul).

Gamybos metai: 1983, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1250 mm Broaching stations: 3 units Iodpfx Aaod Nb A Njuear Distance between broaching stations: 125 mm Holder diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically adjustable steplessly from 1 m/min up to max. 10 m/min Return speed: hydraulically adjustable steplessly from 5 to max. 25 m/min Machine footprint (W x D x H): approx. 5500 x 2800 x 4900 mm (from pit base) Power supply / Connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated pull heads DIN 1417/18 to lock the broaching tools in the pull bridge. The needle lifting heads in the tool loader are hydraulically locked. The machine features a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production; for optimal utilization, a foundation (pit) is ideally required. Pull heads and needle lifters are available on request. The machine can be inspected at our warehouse.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1974, mašinos/transporto priemonės numeris: AKK60945ASK8560, Manufacturer: Frömag Model: KZH 90 x 1500 Iasdpfxelp Im He Aaujr Year of manufacture: 1974 Machine No.: AKK60945ASK8560 Weight: 1.35 t Technical Specifications: Max. pulling force: 7,000 kg Max. stroke: 1,565 mm Max. cutting speed: 2-6 m/min (stepless adjustment) Max. return speed: 2-6 m/min Clamping area: 410 x 610 mm Passage width: 0 (open table) Keyway width: 3 - 100 mm In bores from: Ø13 - 500 mm Depth of machine base below floor: 2,500 mm Footprint (L x W x H): approx. 800 x 1,100 x 1,100 mm Power supply: 380V / 50Hz / 4.73kW Accessories: Indexing device (dividing head) TA Helical keyway broaching unit for producing helical keyways Serration cutting Internal gearing Various tools for manufacturing internal gears and keyways Note: Optional: The machine can also be used for profile broaching.

Gamybos metai: 1990, būklė: labai geros būklės (naudotas), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical specifications: Vertical internal broaching machine in technically very good condition Tensile force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely adjustable Return speed: up to 34 m/min, infinitely adjustable Maximum stroke: 1250 mm Broaching stations: 4 units Iasdpfx Aaolpadyjuor Accessories: - Automatic tool changer - Automatic parts feeder (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-series production with high cutting speeds!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, bendras svoris: 2 900 kg, galia: 8 kW (10,88 AG), įėjimo įtampa: 380 V, brochavimo pozicijų skaičius: 1, bendras plotis: 6 100 mm, bendras aukštis: 1 900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of the pull head holder on the drawbridge: 85 mm Broaching tool clamping: universal pull head for flat shanks up to 25 mm wide Pass-through hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine housing of the tool feeder) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Accessories / Special features: • The machine is equipped with a manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine has a simple oil drip tray mounted on the machine bed without a tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. On request, broaching tools, arbors, and pull heads can be supplied. Iajdpfsxtcz Iex Aauor

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of Manufacture: 1990 Machine No.: 3048 & 3047 General / Technical Data: Chain Broaching Machine for Continuous External Broaching Pulling Force: 25,000 kg Cutting Speed: 7.2 / 8.1 / 9.6 m/min Maximum Tool Length: 3520 mm Passage/Working Width: 520 mm Clamping Surface of Tool Carrier: 3520 x 460 mm Dimensions: 12,300 x 6,400 x 4,650 mm Power Supply: 380V 50Hz / 110 kW Accessories / Special Features: - 6 tool carriers for tool changing - Machine documentation Remarks / General Information: The machines are in good condition and currently stored dismantled at our warehouse. The total transport volume of the facility requires several trucks (approx. 70 tons per machine). The machines were previously used for the production of connecting rods for passenger car diesel engines. Iaodpjinim Tofx Aauor Chain broaching machines are designed for use in mass production environments. The continuous (retraction-free) operation of chain broaching enables maximum achievable productivity for external broaching processes. The chain broaching method is the only broaching process without a return stroke of the tools or workpieces. During chain broaching, the workpiece is continuously guided past the tool, thus performing the feed motion. This unique broaching process is only used for very large batch quantities in series production.

Gamybos metai: 1978, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Iajdpfsiw Dlkox Aauer Tensile force: 6.3 t Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special features: - Coolant / lubricant unit - Without automatic tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideal for machining keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Gamybos metai: 1965, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Mounting in the pull bridge: Ø 105 mm cylindrical Through-hole in clamping table: Ø 125 mm Clamping surface / workpiece area: 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool feeder’s tool tray) Cutting speed: hydraulically, steplessly adjustable from 1.5 m/min to 7 m/min Iaodpfx Astuuvzsauor Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint (W x D x H): approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding work area) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Features: • Mechanical-hydraulic control for broach and return stroke • Integrated coolant and cutting fluid system • Manual tool feed • Broaching carriage with pull head mounting guided flat on both sides • Adjustable pulling force limiter • Pulling force indicator Accessories: • 1 universal pull head for flat shanks up to approx. 40 mm width • Indexing device (see photos) • Various special adapters and clamping devices • Machine documentation Remarks: The machine is suitable for producing keyways using flat broaching tools as well as profile broaching. Thanks to the machine bed and the robust broaching tool feeder, the machine is ideally suited for heavy-duty profile broaching tools. The machine is used and in good condition for its age. The machine is available for inspection at our warehouse. The machine has newly arrived in our stock and has not yet been overhauled, neither technically nor cosmetically. Pull heads for profile broaching are available on request, depending on DIN standard, dimension, and subject to stock.