Horizontali vidinio prabraukimo mašina

Arthur Klink RIW 16x1800

Gamybos metai: 1985, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985, overhauled Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Pulling force: 10,000 kg at 3 m/min Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return stroke speed: hydraulically infinitely variable from 7 m/min to 30 m/min Maximum stroke: 1200 mm Broaching tool clamping: universal pull head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table aperture: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW Itedpoixntwjfx Af Isb

Gamybos metai: 1979, Sąlyga: paruoštas naudoti (naudotas), Max. Schleifdurchmesser: 300 mm, Max. Schleiflänge: 1.950 mm, Max. Werkstücklänge: 2.000 mm Max. Vorschubgeschwindigkeit: 1–30 m/min Iodpfx Ashq Uigof Istb Kühlmittelzufuhr: 100 l/min Stufenlos regelbarer Drehzahlbereich: 2.000–6.000 U/min Spindel: 88 mm Spitzenhöhe: 150 mm Schleifscheiben: 100–250 mm Spindelleistung: 3,5 kW Gesamtleistung Schleifmaschine: 15 kW – 380 V – 50 Hz

Gamybos metai: 1992, Sąlyga: labai geros būklės (naudotas), Na sprzedaż: używana prasa hydrauliczna H-ramowa 700 ton Producent: Muller Siła nacisku (tony): 700 Liczba cylindrów: 2 Wymiary stołu (x-y/mm): 4000×2200 Wymiary suwaka (x-y/mm): 4000×2200 Skok (mm): 1400 Światło przy górnym położeniu suwaka (mm): 1920 Itjdshcfzkepfx Af Ijb Siła poduszki (tony): 400 Skok poduszki (mm): 500

Sąlyga: naudotas, Gamybos metai: 2004, Pressure: 80 t Stroke: 16 - 63 mm Stroke rate: 100 - 750 strokes/min Column gap: 970 mm Installation height (stroke + ram adjustment at top): 380 mm Lateral column opening: 380 mm Table dimensions: 940 x 910 mm Pass-through opening in the table: 770 x 190 mm Table height above floor: 1180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standards With infinitely variable three-phase drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil circulation lubrication Mechanical roller feed Bruderer BBV 205/120, driven via press main shaft/universal shaft Ijdpfovuua Njx Af Istb Guethle CK cantilever brackets Optionally, a soundproof enclosure can be offered – price on request.

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Isdpfx Afjvnd Sue Istb

Gamybos metai: 1984, Sąlyga: paruoštas naudoti (naudotas), Rafamet UBB 112/2 Minimální průměr běhounu kola: 700 mm Maximální průměr běhounu kola: 1120 mm Délka upnutí: 540 - 1050 mm Minimální délka nápravy dvojkolí: 1640 mm Maximální délka nápravy dvojkolí: 2800 mm Maximální šířka pneumatiky: 150 mm Maximální hmotnost dvojkolí: 4000 kg Itsdpfx Afohvml Io Iob Rychlost posuvu saní: 2000 mm/min Maximální posuv saní: 2000 mm/min Výkon hlavního pohonu: 80 kW Hmotnost cca: 40 000 kg

Sąlyga: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 5164, Offer 23148 Technical Data: - With hydraulic clamping and feed device - Cutting range round: 320 mm - square: 300 x 300 mm - Max. cutting length per single stroke: up to 400 mm - Multiple feed up to: 10 x 400 mm - Saw blade dimensions: 3660 x 25 x 0.9 mm Itodpfx Afeq Evn Es Iob - Cutting speed steplessly adjustable: 20 - 100 rpm - Feed rate hydraulically steplessly adjustable - Coolant system - Material support height: 720 mm - Saw blade drive: - Motor: 400 V / 2.5 kW - Space requirements approx.: W 1950 x H 1250 x D 1500 mm - Weight approx.: 1000 kg

Sąlyga: naudotas, Gamybos metai: 2008, Article: Vertical Turning and Grinding Center Make: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control unit: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Cooler for spindle and machine bed cooling Itsdpfx Asia Rtdjf Ijb Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled at a spindle repair shop. Otherwise, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or

Gamybos metai: 1970, Sąlyga: nepatikrintas (naudotas), Offered here is a balancing machine from Trebel. The machine is equipped with a robust steel safety cover. For refurbishment, as the control cabinet is missing! Technical specifications: Manufacturer: Trebel Model: FC4c-xn Year of manufacture: 1970/74 Isdpfxehikdwe Af Istb Standard weight range up to 400 kg Maximum permissible load per block: 200 kg

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: Iodpfx Afjul Efme Ijtb - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data