Horizontalaus prailginimo mašina Prailginimo mašina
Arthur Klink RIW 10 x 1600

Name: Arthur Klink RIW 10 x 1600
Brand: Arthur Klink
Availability: InStock

Gamybos metai

1999

Būklė

Naudotas (visiškai funkcionalus)

Vieta

Hövelhof

Horizontalaus prailginimo mašina Prailginimo mašina Arthur Klink RIW 10 x 1600

Pagrindiniai duomenys

Mašinos pavadinimas:: Horizontalaus prailginimo mašina Prailginimo mašina

Gamintojas:: Arthur Klink

modelis:: RIW 10 x 1600

Gamybos metai:: 1999

Būklė:: beveik kaip naujas (naudotas)

Funkcionalumas:: visiškai funkcionalus

Kaina ir vieta

Vieta:: Mergelweg 206, 33161 Hövelhof, Deutschland

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A15426625

Nuorodos numeris:: KOM 1605

Atnaujinimas:: paskutinį kartą atnaujinta 03.04.2024

aprašymas

Manufacturer: Arthur Klink
Year of manufacture: 1999
Type: Horizontal Broaching Machine
Model: RIW 10x1600x400
Weight: 2,700 kg

General / Technical Data:
Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools.

Broaching stroke: 1,600 mm
Tensile force: 10,000 kg (100 kN)
Tool holder in drawbridge: Ø 85 mm cylindrical
Through-hole in clamping table: Ø 100 mm
Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray)
Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min
Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min
Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area)
Power supply: 400 Volt, 50 Hz
Connected load: 9 kW
Lrodpfx Ajr A Hcbjpneu

Equipment:
• The machine has an electric control for the broaching stroke movement with both manual and automatic operation.
• Integrated coolant/lubrication system
• Tool lift system for flat broaching tools (no automatic feed)
• The broaching slide with pull head holder is equipped with flat guides on both sides

Accessories:
• 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg)
• Complete machine documentation, including CE declaration of conformity

Remarks:
The machine is ideal for manufacturing keyway slots.
Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools.
The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power.

Our direct contact details and further information about the machine can be found in the attached PDF document.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Dokumentai

15426625-01.pdf

Tiekėjas

Registruotas nuo: 2003

175 Skelbimai internetu

Skambinti

Siųsti užklausą

Žinutė*

Pavadinimas*

El. paštas*

Telefonas

Įmonė

Pašto kodas ir vietovėžemė

Esu prekybininkas

Gaukite pasiūlymus dėl panašių mašinų

Pastaba: Jūsų užklausa bus perduota visiems šios mašinų kategorijos pardavėjams. Dėl to galite gauti labai daug pasiūlymų.

Privatumo pareiškimas

Telefonas & Faksas

+49 5257 ... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Hamburg

917 km

Sandėliavimo liftas
ModulaLift ML 50D

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, En Modula Lift ML 50D till salu. Det vertikala lyftmodulet har servats regelbundet av tillverkaren sedan installationen och är i mycket gott skick. Brickorna har en bredd på 4 100 mm och ett djup på 860 mm, vilket ger 3,53 m² lagringsyta per bricka. Med 50 brickor blir den totala lagringsytan 176,5 m². Varje bricka har en maxbelastning på 500 kg, vilket innebär en total kapacitet på 25 000 kg för alla 50 brickor. Det vertikala lyftmodulet är placerat i ett skyddat område med entresolplan, vilket har bidragit till att beklädnad och utvändigt skick är utmärkt. Specifikationer: Tillverkare: Modula Tillverkningsår: 2012 Modell: Modula Lift ML 50D Höjd: 6 200 mm Bredd (lyftmodul / bricka): 4 500 mm / 4 100 mm Djup (lyftmodul / bricka): 3 058 mm / 860 mm Lredpfxev Uxrve Apnsu Antal brickor / Brickhöjd: ca 50 st / 120 mm hög kant Maxvikt per bricka: 500 kg Elektronik: 400 V, 20 A

Peržiūrėti detales

Mažas skelbimas

Vokietija

999 km

CNC frezavimo staklės
MazakFH 880

Skambinti

Gamybos metai: 1997, būklė: paruoštas naudoti (naudotas), Travel X/Y/Z: 1300mm/1100mm/1000mm, Table dimensions X/Y: 800mm/800mm, Number of pallets: 14, Maximum table load: 2200kg, Table indexing: 0.001°. Spindle speed: 7000rpm, Spindle power: 50HP, Tool magazine: 80. Dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, Weight: approx. 24000kg. An on-site inspection is possible. Lrsdpfx Aotx Dn Ujpnju

Peržiūrėti detales

Mažas skelbimas

Frezavimo staklės su lova - Universal Erste Maschinenfabrik Auerbach FBE 1500

Vokietija

872 km

Frezavimo staklės su lova - Universal
Erste Maschinenfabrik AuerbachFBE 1500

Skambinti

Būklė: naudotas, Gamybos metai: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm CNC control: TNC 530 Lrodpfx Aju Nc Rispnsu Spindle operating hours: not yet known Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4000 / stepless rpm Tool holder: horizontal/vertical: SK 50 (DIN 69871/DIN 69872 Type A) Spindle torque: 1000 Nm Spindle head swivels left and right: 90° Feed rate: 1 - 6000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping surface table L x W: 1600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. L x W x H: 3.1 x 4.7 x 2.6 m Dimensions: coolant filter: 1.9 x 1.6 x 1.4 m Required floor space approx. L x W: 38.5 m² Applications: Milling, drilling, thread cutting, boring with direct encoded linear measuring systems the guides for all three axes are flat slideways milling head position controlled +/-90° internal coolant supply (IKZ) and external cooling milling spindle rated drive power 22 kW with integrated hydraulic unit up to 100 bar operating pressure with coolant system, high pressure pump 60 bar (internal cooling), nominal flow 20 l/min, and low pressure pump 4 bar (external cooling), as well as spray gun compact belt filter RESY REBER SYSTEMATIC GmbH, Type KBF 452/710 hinged belt chip conveyor DGS, Type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Peržiūrėti detales

Mažas skelbimas

Empfingen

1 283 km

DMG PH150-8
DMG MORIPH150-8

Skambinti

Mažas skelbimas

CNC lovos tipo frezavimo staklės Juaristi - ML-3 Juaristi ML-3

Babberich

1 224 km

CNC lovos tipo frezavimo staklės Juaristi - ML-3
JuaristiML-3

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, X ašies eiga: 8 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 500 mm, greitas poslinkis X ašimi: 35 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, bendras plotis: 5 800 mm, bendras aukštis: 4 500 mm, bendras ilgis: 13 500 mm, stalo ilgis: 10 000 mm, stalo plotis: 1 250 mm, Travelling column – high performance, precision, and machining capability Linear RAM guide combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with through-spindle coolant at 15 bar Chip conveyor BLUM 3D measuring probe Wide bed, linearly guided on the X-axis, traverse path W = 930 mm Lrsdpfxjyr Dmdj Apnou Rotary table drive pre-installed in electrical cabinet X-Axis: 8,000 mm Y-Axis: 1,300 mm Z-Axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feedrate: 35,000 mm/min Y-axis feedrate: 40,000 mm/min Z-axis feedrate: 40,000 mm/min Milling head auto-indexing: 0.001 x 0.001 deg Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, these details do not constitute representation or contractual terms. We recommend verifying all critical details.

Peržiūrėti detales

Mažas skelbimas

Mazak QTN 250 M X 1000 Mazak QTN 250 M X 1000

Italija

1 266 km

Mazak QTN 250 M X 1000
MazakQTN 250 M X 1000

Skambinti

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, valdiklių gamintojas: MAZATROL, valdiklio modelis: MATRIX, Ši 3 ašių Mazak QTN 250 MX 1000 horizontalioji tekinimo mašina buvo pagaminta 2010 m. Jei norite gauti aukštos kokybės tekinimo galimybes, apsvarstykite mūsų parduodamą Mazak QTN 250 MX 1000 staklių. Norėdami gauti daugiau informacijos, susisiekite su mumis. Mašinos privalumai Techninės mašinos privalumai • Maks. Talpa: 640 Ledpfx Apsyalpcensru • X ašies greitojo tiekimo greitis: 36000 / z ašies greitojo tiekimo greitis: 36000 / c ašies greitojo tiekimo greitis: 555 • Apdorojamas skersmuo: 380 • Maksimalus apdirbamas ilgis: 600 • Baro talpa: 76 • Savaiminio centravimo matmenys (pagrindinis velenas): 250 • Eiga: 1000/kūgis: cm 4 • Aušinimo skysčio bakas: 300 l

Peržiūrėti detales

Mažas skelbimas

Automatinės strypų tekinimo staklės TORNOS Deco 13a

Bienne

1 455 km

Automatinės strypų tekinimo staklės
TORNOSDeco 13a

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Lrsdpfx Asw T Tcwjpneu Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Peržiūrėti detales

Mažas skelbimas

Kalimo plaktukas SMERAL KJH 4 SMERAL KJH 4

Sofia

1 391 km

Kalimo plaktukas SMERAL KJH 4
SMERALKJH 4

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 000 t, Ковашки чук SMERAL тип KJH 4 Пневматично-хидравличен матричен срещуударен ковашки чук. Lrjdpfx Aswbginjpnou Тегло на бойната глава, кг: 1 800 Номинална енергия на удара, кгм: 4 000 Брой удари на бойната глава, 1/мин: 48 Ход на бойната глава, мм: 500 Площ на матрицата, мм: 286 x 600 Минимална височина на матрицата, мм: 350 Мощност на главния електродвигател, kW: 45 Дължина на машината, мм: 3 100 Ширина на машината, мм: 1 900 Височина на машината, мм: 3 900 Тегло на машината, кг: 27 000

Peržiūrėti detales

Mažas skelbimas

Horizontali vidinio prabraukimo mašina Arthur Klink RIW 10 x 1500 x 500

Hövelhof

1 069 km

Horizontali vidinio prabraukimo mašina
Arthur KlinkRIW 10 x 1500 x 500

Skambinti

Gamybos metai: 1994, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Lsdpfxjgyd T Ej Apnoru Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Power Supply: 400V / 50Hz

Peržiūrėti detales

Mažas skelbimas

Universalus apdirbimo centras DMG Mori M 2 Pro

Vokietija

1 199 km

Universalus apdirbimo centras
DMG MoriM 2 Pro

Skambinti

Būklė: geras (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, DMG Mori M2 Pro, Year of manufacture: 2023 / Commissioned: 2024, Control: Siemens Sinumerik ONE, Travel (X/Y/Z): 1100/550/510 mm, Table size: 1400 x 600 mm, 24-position tool changer, Linear axes X/Y/Z: 24 m/min, Tool holder: SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probe kit, Coolant spray gun, Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Compact and robust counter bearing with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Clamping bridge, steel, L/W 600/270 mm, Lrjdsza Apaepfx Apnou Base plate, steel, Tropical package, Active cooling unit for control cabinet, External and internal air blast (through spindle center) activateable via M-function, External electronic handwheel, Software option - DXF import, Machine with 2,100 spindle hours.

Peržiūrėti detales

Reklamuokite čia