Puodą šlifavimo

Brueckner FSH 1

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Buderus SB735 low-temperature boiler Year of manufacture: 2007 Output: 1200 kW Laodpfxenr Ek Us Am Rog Burner: Weishaupt oil or gas burner available upon request

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Lsdpfor A Hcbox Am Reag Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: naudotas, Gamybos metai: 1998, Techninės detalės: Profilio aukštis: 180 mm Lsdpfxou Ngrqs Am Reag Didžiausias šlifavimo disko skersmuo: 200 mm / puodelio formos diskas Šlifavimo disko skylė: nenurodyta Šlifavimo veleno apsisukimai: 2800 aps./min Stalo dydis (IxP): 500 x 160 mm Darbinė įtampa: 220 / 380 V Bendras galios poreikis: 3,0 kW Mašinos svoris apie: 0,57 t Mašinos matmenys (IxPxA): 1,28 x 1,0 x 1,75 m Pritaikymas priekinio paviršiaus šlifavimui Magnetinė stalo dalis: IxP = 680 x 200 mm; pakreipimas apie 15°; pasukimas 360° per radialinę skalę Magnetas: tipas S2D; pastovus magnetas, tvirtinimo paviršius 300 x 150 mm Šlifavimo disko laikiklis: - vertikalus reguliavimas = 180 mm rankinis; pasukimas apie 45° į dešinę/kairę rankinis Valdymas per valdymo pultą prie mašinos. Aušinimo skysčio talpa su pompa ir tiekimu

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 4105, Grinding area: approx. 130 x 255 mm Grinding speed: 2800 rpm Laedpjh Ugwvofx Am Rog Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Required space: 750 x 700 x 1700 mm Weight: approx. 380 kg Cup wheel diameter: 180 mm

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1733, Vertical internal broaching machine with index plate by Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Laodpsgyd S Sefx Am Reg Connected load: 7.5 kW The machine has been fully overhauled and is therefore in very good condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 87 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 600 mm, sukimosi skersmuo virš skersinio stumduko: 410 mm, veleno greitis (min.): 22 000 aps./min, Parduodamas CNC tekinimo centras, gamintojas DMG, modelis CTX beta 800, pagaminta 2009 m. Iš karto prieinamas Staklės gerai prižiūrėtos ir visiškai veikiantys. Techninė būklė nepriekaištinga, paruoštos iškart dirbti. Techniniai duomenys Staklių tipas: CNC tekinimo centras Gamintojas: DMG Modelis: CTX beta 800 Pagaminimo metai: 2009 Valdymas: Heidenhain 4290 Maks. tekinimo ilgis: 600 mm Įrankių revolveris: 12 padėčių Įrankių laikiklis: VDI 40 Darbo valandos: apie 87 000 val. Veleno valandos: apie 22 000 val. Z1 linijinis kreiptuvas neseniai pakeistas S2 revolverio pavara neseniai pakeista Staklės reguliariai aptarnautos servise Techninė būklė nepriekaištinga ir visiškai veikianti Apžiūra su pajungta srove galima pagal susitarimą Yra aptarnavimo ir priežiūros ataskaitos Didelis priedų paketas WTO varikliniai įrankiai Papildoma dokumentacija bei nuotraukos pagal pageidavimą Susidomėjus, tiesiog parašykite arba paskambinkite Laedpfxsyq Hq Nj Am Reg Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, lazerio galia: 30 W, aušinimo tipas: oras, bendras plotis: 60 mm, bendras aukštis: 1 660 mm, bendras ilgis: 80 mm, bendras svoris: 80 kg, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. Laser marking is necessary in many industries for permanent labeling. The powerful laser software makes it possible to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, even without extensive programming knowledge. The software can automatically increment serial and article numbers after initial setup. In addition, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also possible. Standard equipment includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optionally 20 Watt or 50 Watt) Lajdpfx Amsunh Hrj Reg • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal light for operating status display • Marking software EZCAD (additional laser software optional) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z axis (work level setting) • Aluminum profile frame • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (LxWxH) • Weight: approx. 80 kg

Būklė: labai geros būklės (naudotas), HM and HSS blank grinding machine with 8 workstations GRIFO model ACG80 Lasdpfxed Sxaaj Am Rjg

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 340 mm, šlifavimo plotis: 170 mm, bendras aukštis: 730 mm, bendras ilgis: 930 mm, bendras plotis: 780 mm, The G115 surface grinder is a compact grinding machine designed for processing the periphery or the face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With the use of fixtures or shaped grinding wheels, inclined or contoured surfaces can also be machined. The machine is ideal for small businesses, the maintenance sector, home workshops, laboratories, teaching demonstrations, and more. TECHNICAL DATA Maximum cut depth: not greater than 0.03 mm Maximum linear speed of grinding wheel: 35 m/s Ljdpfjxb Uq Dsx Am Rsag Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal table travel: 340 mm Cross table travel: 170 mm Work table T-slot: 1-12 mm Grinding wheel outer diameter × inner diameter × thickness: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight/Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Packaging dimensions: 1100×760×860 mm The work table can be moved longitudinally and transversely. The grinding head can be raised or lowered vertically. High rigidity across the entire machine structure. Smooth operation of the grinding head. Compact design with low noise emission. The work enclosure is available separately. The machine is lubricated with a manual oil pump. To lubricate, simply pull out the lever. If you require any special accessories to enhance work efficiency, please contact customer service. (Special accessories need to be purchased separately.) PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the taper bore axis is 0.01~0.02 mm at a distance of 100 mm.

Būklė: labai geros būklės (naudotas), 2 schwarze Teile, Höhe 1800 mm x Länge 600 mm x Breite 800 mm Laodpfx Amjma E Eqo Rog