Prailginimo staklės - Vidinės - Vertikalios

FORST RISH 2,5 x 1000 x 320

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 25, ruošinio skersmuo (maks.): 40 mm, bendras ilgis: 1 700 mm, bendras plotis: 2 400 mm, bendras aukštis: 4 770 mm, pjovimo greitis: 60 000 mm/min, TECHNICAL DETAILS Performance Data Maximum tensile force: 25 kN Maximum stroke: 1,000 mm Return speed: 20 m/min Maximum shaft diameter: 40 mm Clamping plate: 320 mm MACHINE DETAILS Machine weight: approx. 6,000 kg Fgodpfxjwx Ibms Af Aeb Control Cabinet Weight: approx. 800 kg Total installed power: 24 kW Coolant System Net weight: approx. 1,300 kg Tank capacity: 630 l Hydraulic Unit Net weight: approx. 2,000 kg Tank capacity: 800 l

Būklė: naudotas, Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Fgedpfeynmpgjx Af Aob Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speeds: 1,500 / 1,700 / 2,200 rpm Infeed incrementally: 0.001–0.030 mm/Ø Infeed continuously: 0–0.95 mm/Ø Table swivel: ±8° Table longitudinal travel: 1,300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 × 2.0 m Originally supplied new to university. Taken over in 2018. Then fully serviced at BEMA and delivered to a single-operator workshop. The machine will now be serviced again and the table geometry remachined. 2-axis Fagor digital readout retrofitted. – Tailstock with fine adjustment – Internal grinding device – Coolant system Additional accessories available on request.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: Fodpfxeuxfupe Af Aogb - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 03.2456, CNC internal broaching machine Arthur Klink RISH 6.3X1000X400 Fgodpoirwiqofx Af Asb Overhauled in 2016

Būklė: geras (naudotas), Gamybos metai: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. external diameter of workpiece (equipment): 450 mm Fsdpfx Aovu E Nuof Asgb Module - max.: 6 Maximum gear width: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate - stepless: 130 - 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface - tool spindle: -55 / +300 mm Maximum distance table surface - tool spindle: 200 mm Maximum distance table surface - tool spindle: 350 mm Manual column lateral shift: +/- 25 mm Manual swiveling angle of tool spindle: +/- 0.5° Max. tool speed: 15 rpm Max. workpiece speed: 27 rpm Max. tool diameter: 7 inches Voltage: 400 V Frequency: 50 Hz Max. current: 70 A Total power consumption: 48 kW Machine weight approx.: 11 t Space requirement approx.: 4.27 x 3.11 x 2.87 m Table bore: 40 mm Main spindle taper: SK 45 Control: Siemens Sinumerik 840 C Gear shaping machine Gleason PFAUTER Model PSA 300 The CNC modular gear shaping machine with gear cutter is designed for machining external and internal cylindrical gears, with straight or helical evolvent gearing, as well as any other profiles achievable by generating or indexing shaping processes. The work cycle is controlled by a CNC unit with dedicated software for gear machining. Field of application --> The PSA 300 was designed for manufacturing: - Gears with straight external toothing - Gears with straight internal toothing - Gears with external helical toothing - Gears with internal helical toothing

Gamybos metai: 2007, būklė: labai geros būklės (naudotas),

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, YEAR: 2008 Fjdpjvm Eixefx Af Ajgb MAXIMUM RAM FORCE: 2,000 tons SLIDE STROKE: 1,500 mm TABLE DIMENSIONS: 5,000 x 2,380 mm BLANKHOLDER FORCE (UPPER): 300 tons CUSHION STROKE (RAM): 200 mm FAST STROKE SPEED: 220 mm/sec CUSHION CAPACITY: 600 tons CUSHION STROKE (SLIDE): 400 mm OVERALL HEIGHT: 9,145 mm DISTANCE BETWEEN UPRIGHTS (FRONT OPENING): 5,000 mm TOTAL WEIGHT: N/A

Būklė: naudotas, Gamybos metai: 2005, Machine weight approx. 7,800 kg Required space approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gearing: - Maximum module (steel with approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Maximum module (steel with approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swing diameter: 150 mm - Maximum internal diameter: 100 mm Tool: - Taper in milling spindle: HSK-D63 - Milling spindle diameter: 85 mm Fsdoudc S Hjpfx Af Ajgb - Maximum stroke length: 30 mm Machine travel distances: - Radial (X-axis): 180 mm - Column swivel (B-axis): -1 to +11 degrees Machine – workpiece table: - Outer diameter: 220 mm - Clamping diameter: 160 mm - Bore: 63 mm Speeds: - Feed rate X-axis: 12,000 mm/min - Workpiece table (C-axis): 0–400 rpm - Cutter (C2-axis): 0–300 rpm - Spindle stroke (A-axis): 500–3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Machine connected load: 35 kVA - Cable cross section: 35 mm² - Fuse protection: 80 A

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 460 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 150 mm, darbinio aukščio: 1 030 mm, Straight-cut circular saw automatic machine MSK 471 NA for HSS and carbide-tipped saw blades Fedpfxjubbw As Af Aogb Cutting range: round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid materials Automatic cut-off sorting via cut-off gripper Machine inspected by KALTENBACH, wear parts replaced

Būklė: visiškai atnaujintas (naudotas), Pilnai renovuotas Studer apvaliosios šlifavimo staklės. Atstumas tarp centrų – 650 mm. Techniniai duomenys ir priedai pagal nuotraukas ir PDF. Fedpfx Aexxy A Tsf Ajgb