Gręžimo šlifavimo staklės

WMW WEKÖ Königssee SBU 40

Sąlyga: naudotas, Gamybos metai: 1984, Technical details: Grinding diameter min/max: 8 / 40 mm Spindle speed: 3,000 rpm Total power requirement: approx. 1.2 kW Machine weight approx.: 0.24 t Machine dimensions approx. LxWxH: 0.7 x 0.9 x 1.3 m The grinding spindle is equipped with two hand levers: Left working area = manual grinding device for small shank drills Kedou Ng Iropfx Afajnd Right working area = pivoting device for conical shank drills Cutting angle max. 180° Small drill pivot arm: relief angle 5° - 9°; drill Ø 8 - 15 mm manually adjustable; grinding wheel cup wheel Ø 200 x 40 mm with bore Ø 32 mm Large drill pivot arm: relief angle 5° - 9°; max. drill Ø 400 mm; division 6x with manual indexing; currently mounted grinding wheel Ø 180 x 31 mm with bore Ø 32 mm Grinding types: Standard grind, DK grind, centering grind, spiral countersink, multiple-step drills

Sąlyga: naudotas, Gamybos metai: 1980, Technical details: X-axis travel: 850 mm y-axis travel: 280 mm z-axis travel: 355 mm Knjdpfx Afju Ndf Ieaod Spindle taper ISO: SK 45 / SK 45 Tilting spindle head left and right: each 90° Speed range: 28 - 1400 rpm / 18 steps Distance table/horizontal spindle: min.: 60 / max.: 180 mm Table clamping surface: 1070 x 270 mm Table load: 1000 kg Table swivel range +/-: 45° each Feed rate: X+Y: 16 - 800 mm/min and Z: 5 - 250 mm/min Total power requirement: 8.0 kW Machine weight approx.: 3100 kg Machine dimensions approx. LxWxH: 2.1 x 1.8 x 2.15 m Control cabinet dimensions: L: 0.8 x W: 0.45 x H: 1.65 m Clamping surface: 315 x 1250 mm Manual horizontal beam adjustment: 650 mm Mounted on the table: clamping head with 3-jaw chuck, Ø 200 mm, with internal jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter Ø 80 x Ø 8 mm

Sąlyga: reikia remonto (naudotas), Machine number: 1464 Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table: 630 x 350 mm Ksdpod Hl Stjfx Afasnd Clamping surface: 700 x 300 mm Spindle speed range: 45 to 2,240 rpm Spindle mount: SK 40 Feed range longitudinal: 6.3 to 1,250 mm/min Feed range cross: 6.3 to 1,250 mm/min Connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Sąlyga: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet Ksdpfov A Sqhex Afaond CE safety pre-installed

Sąlyga: naudotas, Gamybos metai: 2004, Technical Details: Swing diameter over bed: 850 mm Knedpfx Afou Ix Izeaod Swing diameter over cross slide: 580 mm Turning length: 4000 mm Distance between centers: 4000 mm Faceplate diameter: 800 mm Control: Siemens 810D Spindle speed: 1 - 1,600 rpm / 2-step Spindle torque: 6,000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse in X-direction: 4 m/min Rapid traverse in Y-direction: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 Size 11) Operating hours / On-hours: to be read out Tailstock quill: ISO MT 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centers: 5,000 kg Max. workpiece weight – unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power requirement: approx. 52 kW Machine weight approx.: 14.0 t Machine dimensions (LxWxH): approx. 2.6 x 9.1 x 2.5 m Cycle turning lathe with Siemens cycle control Motor: 37 kW, rated speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gearbox stages Stage II: Spindle torque 258.9 to 1,364.6 Nm Stage I: Spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electrical cabinet Parat quick-change tool post Coolant system Including various accessories (see photo), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Sąlyga: naujas, For grinding HSS and carbide engraving cutters, as well as mills with single or multiple flutes in various profiles such as radius cutters or cutters with a negative conical angle. The universal index head is adjustable to 24 positions, allowing for any required profile angle to be achieved; free rotation of 360° or in 10° increments is possible for grinding end mills, twist drills, and lathe tools. Simply replace the attachment on the index head for different tool types—no complex assembly required. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding wheel ×1 Twist drill grinding attachment ×1 End mill grinding attachment ×1 Lathe tool grinding attachment ×1 Options Collets: Ø3, Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Knsdpfx Afeq E Ry Hsasd Max. collet capacity Ø3 - Ø18 mm Max. grinding diameter Ø18 mm Taper angle 0~180° Relief angle 0~45° Negative angle 0~25° Speed 5300 rpm Grinding wheel Ø100 x 50 x Ø20 mm Motor 375 W Dimensions 550 x 460 x 490 mm Weight 51 kg

Sąlyga: naudotas, Length: 1800 mm Kjdpecxxu Djfx Afasnd Width: 1200 mm Machine weight approx.: 1.6 t Space requirement approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition

Sąlyga: naujas, Metal band saw OPTIMUM OPTIsaw S275N - Showroom machine - Feed rate steplessly adjustable, pivoting ----- Technical Data ----- Swivel range: 0 - 60°, Cutting height: 150 mm, Cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Knedpfju R S Hpjx Afasd Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new showroom machine -

Sąlyga: naudotas, Gamybos metai: 1980, Drilling capacity in steel (diameter): 23 mm X-travel: 400 mm y-travel: 285 mm Total power requirement: 3 kW Machine weight approx.: 1,400 kg Space requirement approx.: [missing dimension] Brand: ACIERA (Switzerland) Semi-automatic precision drilling and milling machine with BREGNARD coordinate table Model: 23 TR 50 Year: approx. 1980 #36586 X-axis (longitudinal): 400 mm Y-axis (transverse): 285 mm Kjdpfx Aet Hw Sbsfasnd Z-axis (vertical, quill): 120 mm W-axis (drill head slide): 470 mm Table size: 520 x 410 mm Min./max. distance vertical spindle to table top: 230 / 700 mm Table cross adjustment approx.: 280 mm Drill spindle overhang approx.: 270 mm Spindle speeds (continuously, 2 ranges): 45 – 4,000 rpm Spindle taper: SF 32 Drilling capacity in steel: 23 mm Feed rates: 0.1/0.04/0.02 mm/rev and 0.6/0.25/0.12 mm/rev Workpiece weight approx.: 300 kg Spindle drive: 2.5 kW Total drive approx.: 3 kW, 400 V, 50 Hz Weight approx.: 1,400 kg Accessories / Special equipment: • BREGNARD precision coordinate table TR 50 for X/Y axes, with pneumatic rapid traverse via hand control; longitudinal travel 400 mm, transverse travel 285 mm • Automatic drilling feed with automatic shut-off, simple depth stop • Electric control panel with buttons for rapid adjustment of drill slide, shut-off at uppermost quill position, etc. • Multiple tool holders with special taper receptacle, clamping devices, drill chucks • Built-in coolant system, central lubrication, fold-away chip guard • Machine light Condition: good – ready for demonstration; ideal machine for single-piece or small batch production; very robust build Delivery: ex-stock – as inspected Payment: net, upon receipt of invoice

Sąlyga: naujas, Centre distance ----- 500 mm Knedpfopz Iy Asx Afaod Centre height ----- 125 mm Swing over bed ----- 250 mm Swing over cross slide ----- 150 mm Spindle taper ----- MT4 Spindle bore ----- 26 mm Bed width ----- 140 mm Spindle speed ----- 80-1600 rpm Tailstock ----- MT3 Motor ----- 750W Lathe equipped with automatic longitudinal and cross feed Including: base cabinet, 3-jaw chuck, 4-jaw chuck, faceplate, fixed steady, travelling steady, CE guard