Medžiagų bandymai pirkti naudotą (489)

Sąlyga: labai geros būklės (naudotas), Espec Model: EGN28-6CWL Espec Water-cooled Temperature Temperature Test Chamber N Series Power Supply: AC 400 V 3-phase 50/60Hz 38A Temperature Range: -70 to +180°C Temperature Change Rate: Heating: 10 K/min Cooling: 5.5 K/min Internal Dimensions (W x H x D in mm): 1000 x 1000 x 800 External Dimensions (W x H x D in mm): 1205 x 1920 x 2159 Usable Volume: 800 liters Hfedpfeuzva Uox Abmor Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg Important safety information for you as the buyer! The following steps are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Espec Type: Espec Model: TSA-303EL-W Water-cooled Cold Chamber: -65°C to 0°C Hot Chamber: +50°C to +200°C System: Two-zone test via damper switching Temperature fluctuation: ±0.5°C Hot Chamber: Temperature heating time: Ambient to +200°C within 15 min. Cold Chamber: Temperature pulldown time: Ambient to -70°C within 40 min. Temperature recovery: within 10 min. Internal dimensions (W x H x D mm): 970 x 460 x 670 Hodpovgw Uajfx Abmjfr External dimensions (W x H x D mm): 1870 x 1900 x 1770 (1805) Electrical supply: 400 V AC 50Hz, 70A Refrigerants: R449A 5 kg, R23 2.0 kg Weight: approx. 1,450 kg Year of manufacture: 2018 To ensure your safety as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) If you have further questions, we are happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VCL 7003 Climate Test Chamber, Air-Cooled Test Chamber Volume: approx. 34 liters Specifications for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.3 to ±1.0 K Spatial Temperature Uniformity: ±0.5 to ±2.0 K Rate of Temperature Increase: 4.0 K/min Rate of Temperature Decrease: 3.0 K/min Maximum Heat Compensation: 550 W Temperature Calibration Points: +23°C and +80°C Specifications for Climatic Testing: Temperature Range: +10 to +95°C Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Temporal Temperature Deviation: ±0.3 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.5 K Climatic Calibration Points: +23°C / 50% RH and +95°C / 50% RH Hfjdpfx Aov Tnd Sobmjr Internal Chamber Dimensions (W x D x H): 350 mm x 300 mm x 310 mm External Dimensions (W x D x H): 640 mm x 750 mm x 1730 mm Electrical Connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated Current: 11.0 A Maximum Rated Power: 2.5 kW Sound Pressure Level: 59 dB(A) Refrigerants: R-404A / R23 Weight: approx. 130 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out in advance on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See images) (Subject to technical modifications and errors. All information without guarantee!) If you have any further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Sentek Type: L1024m with PA115 Technical Data: Sine Max (kgf / N): 1,000 / 9,810 Random Force rms (kgf / N): 1,000 / 9,810 Shock Force (6 ms) kgf: 2,000 / 19,620 Usable Frequency Range Hz: 5–3,500 Continuous Displacement pk-pk mm: 51 Shock Displacement pk-pk mm: 51 Max Velocity m/s: 2 Max Acceleration Sine Peak m/s²: 980 Shaker: Shaker Head Diameter mm: 240 Insert Pattern PCD mm plus 1 at centre: 8–100 / 8–200 Thread M10 Resonance Frequency ±5% Hz: 3,050 Max Load Capacity kg: 200 Natural Frequency of Transverse Axis Hz: < 5 Stray Flux Density Gauss: < 10 Weight kg: 1,150 Dimensions (W x D x H) mm: 884 x 890 x 841 Amplifier Dimensions (W x D x H) mm: 580 x 850 x 1,800 Amplifier Weight Uncrated kg: 290 Cooler Type: VAPE500/P2 Dimensions (W x D x H) mm: 620 x 710 x 1,120 Weight kg: 120 Total Weight approx.: 1,540 Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data and specifications!) If you have further questions, please feel free to contact us by phone. Hedpfx Abor A Ezzjmsfr

Gamybos metai: 2022, Sąlyga: labai geros būklės (naudotas), Weiss Model: T/800/70/10 Water-cooled External dimensions (H x W x D): 2085 x 1415 x 2810 mm Test chamber dimensions (H x W x D): 950 x 1100 x 800 mm Volume: 800 liters Minimum temperature: –72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation at +20 °C: 8000 W Power connection: 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Rated power: 30 KW Rated current: 57 A Operating hours: approx. 10 (Never used) Hfodpfxsvxrwgs Abmsr Condition: pre-owned / used Weight: 1600 kg Scope of delivery: (See picture) Sale ex location! (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CTS Climate Test Chamber C-55/1000 Li Water-Cooled Temperature range: -50°C to +100°C Humidity range: 5% to 95% rH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 CTS series designation breakdown (example: Type C -55/1000/Li): 1) C: Climate 2) -55: lower temperature -55°C 3) 1000: 1000 liters test chamber volume 4) Li: special equipment for tests with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for external test object control Test chamber lighting: Energy-efficient, high-luminance LED strip mounted on the door Shelf: Stainless steel, support surface 970 x 980 mm Maximum load per shelf: 35 kg Total load at max shelf configuration: 100 kg Feed-throughs: 1a: NW50 1b: 2x NW125 1c: 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range: -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C Climate tests: Temperature range: +5°C to +95°C Humidity range: 5% to 95% RH Dew point range: +5°C to 78°C Temperature deviation ≤ ±1.0 K over time Humidity deviation ≤ ±3.0% rH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options can affect the performance data. Dimensions: Test chamber volume: 1000 liters Test chamber internal dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level: < 58 dB(A) (measured in accordance with DIN EN ISO 3744, at 1 m distance, front side) Weight: approx. 1000 kg Heat emission to placement area: 10.4 kW Cooling unit: Water-cooled, low noise, fully hermetic Stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for buyers regarding safety: Hfedpjva Hi Hefx Abmjr The following steps are performed in advance for our offered chambers: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications, technical data, and information are subject to change and error!) Further questions gladly answered for you by phone.

Sąlyga: naudotas, LDS Type: V875 Shaker System V875-440 LPT600C with SPA40K Amplifier Electrodynamic shaker for medium force applications Technical Specifications: Armature size: 440 mm Head expander: 850 x 850 mm Sinusoidal force vector: 35.6 kN (peak) Random force vector: 35.6 kN (rms) Shock force vector: 106.75 kN (peak) Frequency range: 5 – 3000 Hz Maximum specimen mass: 600 kg Hfsdpfx Abjuxcugemor Maximum acceleration: 1078.7 m/s² Maximum velocity: 1.8 m/s Displacement: ±25.4 mm Vibration test modes: - Sine - Random - Shock Amplifier SPA40 Slip table: Dimensions (W x H x D): 1400 mm x 1250 mm x 2200 mm Table surface: 600 mm x 600 mm Table thickness: 37 mm Table weight: 27.4 kg Max. payload: 500 kg Condition: used Weight: Shaker: approx. 2200 kg Blower: 181 kg Amplifier: 622 kg Slip table: 4760 kg Scope of delivery: (see photos) (Specifications subject to change and possible errors.) For further questions, please do not hesitate to contact us by phone.

Sąlyga: labai geros būklės (naudotas), TIRA Type: TCZ 4022 S -2K Description: Air-cooled Climate Simulation Chamber System Composition: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air treatment compartment - Humidification system - Machinery compartment - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ± 0.5°C (without thermal test chamber load, in accordance with DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ± 1.0°C (without thermal test chamber load, in accordance with DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% rh (without thermal chamber load) - Dew point temperature range: +5...+89°C (without thermal chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% rh (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% rh (without thermal chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design Features: - Air guidance: * Supply air: Perforated sheet at the rear wall, in the ceiling area * Exhaust air: Perforated sheet at the rear wall, in the floor area - Temperature control: Hfedpevx S Hhjfx Abmer * Direct cooling via evaporation of refrigerant in a finned heat exchanger * Heating via electric resistance heater - Dehumidification: * Direct dehumidification by evaporating refrigerant in a heat exchanger - Interior cladding: Stainless steel - Exterior cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel, floor load 15,000 N/m² - Wheel load (bearing surface ≥4 cm²): 1,500 N/wheel - Door: Double-wing door, stainless steel, lacquered exterior with viewing window (W x H) 1,000 x 1,000 mm - Chamber lighting: 4 spotlights at 500 W each - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Blitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL 9010, white - Door: RAL 9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidifying unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Sąlyga: labai geros būklės (naudotas), Weiss Model: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test Chamber Explosion-Proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test Chamber Designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cooling / Heating Operation: -70 to +180°C Climate Operation: 10 – 95°C Humidity: 10...98 % rH Temperature Change Rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Required fuse (on site): 32 A slow-blow Permissible test specimen weight: Hfodpov Ewy Hofx Abmer Total load of grates: 80 kg Test chamber floor: 80 kg, insert grate: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The evaporator of the air conditioning unit was replaced) Important safety information for you as buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, chambers are subjected to documented test runs. Condition: used / gebraucht Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Hfsdpoqwim Eefx Abmsr Data for temperature tests: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 Watts Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Heat compensation max.: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following measures are performed on all of our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon completion of testing, the chambers undergo documented trial operation. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a Köhler salt spray chamber. Köhler salt spray chamber corrosion test chamber Köhler salt spray chamber HKT 500 Operation via touch panel Hsdpfxsn Arqds Abmjfr Internal dimensions W x D x H (without hood) 1880 x 840 x 1210 mm Test chamber volume: 500 l Temperature range: chamber ambient temperature up to 50°C Power supply: 230V 1P/N/50Hz 3000W Type: HKT 500 WTG Weight: 400 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Weiss We are offering a Weiss emissions test chamber. Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 mm (usable height 1600 mm) Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating range: +18 °C ...+45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Temperature range: +18 °C ...+45 °C Temperature stability: ≤ ±1 K (over time) Hfodjmfny Ispfx Abmsr Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Duct connection (air inlet and outlet): Ø 80 mm, at the rear of the chamber Shut-off valve, gas-tight (air inlet and outlet): Ø 80 mm, gas-tight, pneumatic operation, delivery limit: connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ +18-45 Condition: used Sale is from site Scope of supply: (Only the Weiss emissions test chamber WT 5.1'/ +18-45 Mini-SHED) (Specifications and technical data may be subject to change and error!) We are happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus Shock Test Chamber We offer a shock test chamber here. Temperature Shock Test Cabinet, Water-Cooled Two-chamber design Hot Chamber: The temperature range for the hot chamber is from +50°C to +220°C Temporal temperature deviation at the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Rate of temperature change Heating: 11 K/min Cold Chamber: The temperature range for the cold chamber is from -65°C to +70°C Temporal temperature deviation at the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Rate of temperature change Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Hfedjikvlxepfx Abmor Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Weight: 1000 kg For your security as a buyer, please note the following! The following measures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a trial run, monitored with calibrated instruments. Model: HT 7012 S2 Condition: used Scope of delivery: (see photograph) (Specifications and data subject to change and error!) If you have any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Temperature Test Chamber We are offering you a Weiss temperature test chamber. Weiss Temperature Test Chamber, water-cooled Technical specifications: Model: WT1-600/70 External dimensions (excluding hinges and door lock): Hfsdoirmg Ajpfx Abmer Height: 1980 mm, Width: 1085 mm, Depth: 1655 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Cold / heat operation: -70 to +180°C Temperature change rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Maximum permissible test load: Total rack load: 80 kg Refrigerants: R404A + R23 Weight: 600 kg Type: WT1-600/70 Important information for your safety as the buyer: The following steps are carried out on our test chambers before delivery: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Thermotron Temperature Chamber We are offering you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-5-5 Internal workspace dimensions (W x D x H): 102 x 100 x 97 centimeters Workspace volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70°C to +180°C Hodpfxeirmite Abmsfr Temperature control tolerance: 0.3°C External dimensions (W x D x H): 122 x 188 x 218 centimeters Electrical requirements: 400/3/50 32.4 A Refrigerants: R-404A / R23 Approximate weight: 862 kg Model: Thermotron SE-1000-5-5 For your peace of mind as a buyer, please note the following information! The following procedures are carried out on our chambers prior to sale: 1. Functional testing and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. Leak test with certification 4. Upon successful testing, the chambers undergo a trial run monitored with calibrated instruments. Condition: used Scope of delivery: (See image) (Specifications may change and errors in technical data are reserved!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a Heraeus Vötsch dryer for coating materials. Maximum concentration of flammable substances: < 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750°C Device Description: Technical Data: Internal chamber (usable volume): 0.216 m³ Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm External dimensions: Total width 796 mm, Height 1725 mm, Depth 850 mm Loading capacity / Payload: Total roller conveyor: 55 kg Loading height above installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow: 96 m³/h Purge time (5 air changes): 90 sec Recirculation air flow (enhanced): 33 m³/h Total steam space: 0.414 m³ Sound pressure level (according to DIN 45635): < 70 dB(A) Shutdown temperature: Temperature limiter (TB), fixed setting: 300°C Adjustable temperature regulator (TWB): above nominal temperature 20 Temperature safety class (per EN 60519-2): Temperature limiter (TB): 1 Adjustable temperature regulator (TWB): 2 Nominal temperature: 200°C Hfsdpfohv Ru Sex Abmsr Electrical Data: Rated voltage / Frequency: 400V, 3/(N)PE, AC 50/60Hz Rated current: 12.0 A Rated power: 6.0 kW Connection rating: 7.0 kW Weight: 275 kg Type: LTU 60/60 Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Climate Chamber We offer you a Heraeus Vötsch climate chamber. Vötsch Climate Chamber VCS 7033 Water-Cooled Temperature range: -70°C to +180°C Temperature change rate: Heating: 7.5 K/min Cooling: 6.5 K/min Humidity range: 10% to 98% rH Temporal temperature deviation: ± 0.5 K Spatial temperature deviation: ± 1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm Side port: 90 mm diameter Approx. 330 L, Weight: 600 kg Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW Rated current: 17 A Refrigerants: R404A / R23 Type: VCS 7033 For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run which is monitored with calibrated equipment. Condition: used Hfsdpfspz H Hxsx Abmer Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VTS³ 7018-5 Hfsdpfx Ajn E Sk Esbmer Water-cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 900 mm x Depth 1550 mm x Height 1850 mm Temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: Cooling 7.5 K/min Test chamber volume: 190 liters Rated voltage: 400V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerants: R404A and R23 For your security as a buyer, please note the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical specifications!) Should you have further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you an RMS Vibrations shaker. Hfedped Talgofx Abmor RMS Vibrations Shaker SW 3009 with side channel blower SKP49033-01/06 Type: SW 3009 Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a mytron temperature control system TS 1800. mytron Temperature Control System TS 1800 400V 3N, 50Hz, 3x35 AT Weight: approx. 920 kg Type: TS 1800 Hfoded Huqhepfx Abmer Condition: used Scope of delivery: (See picture) (Technical data and information are subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Mytron drying cabinet. The WT 850 drying cabinet is designed for simultaneous drying of multiple products or auxiliary devices in the semiconductor industry. Due to its robust construction (box-section frame design) and the use of stainless steel materials for the heating chamber, the WT 850 drying cabinet is suitable for universal applications. The roll-in trolley allows for easy loading and unloading of the WT 850 drying cabinet. An exhaust connection with control damper enables the cabinet to be connected to a central extraction system. Technical specifications: - External dimensions: width 1145 mm x height 1880 mm x depth 1810 mm - Heating chamber dimensions: width 850 mm x height 690 mm x depth 1410 mm Hfodpfx Absiwyiwjmor - Chamber volume: approx. 830 liters - Weight: approx. 230 kg, trolley 50 kg - Temperature range: 10°C above ambient temperature up to +120°C - Spatial temperature uniformity: ± 1°C - Temporal temperature stability: ± 1°C - Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug - Power consumption: 4.5 kVA - Fusing: 3 x 16 A, 1 x 6 A - Control: digital controller - Safety device: adjustable over-temperature protection - Pass-through ports: - Exhaust connection 100 mm with control damper (top) - Intake connection 100 mm with control damper (top) - Type: WT 850 - Condition: used - Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), RS simulators We offer here a temperature test chamber. Water-cooled temperature test chamber Temperature range: -70°C to +180°C Temporal deviation: ±1 K according to DIN 50011 with empty test space Average heating rate: approx. 3 K/min (according to DIN 50011 Part 12) Average cooling rate: approx. 3 K/min (according to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x Height 530 mm x Depth 530 mm External dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power consumption: approx. 6 kVA Current consumption: 12 A Main fuse: 3 x 16 A, slow-blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used Scope of delivery: (See picture) (Technical data subject to change and error!) Hfodpfx Abolp Hytjmer If you have further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber VTS 7033, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.5 K Spatial temperature deviation: ± 1.5 K Heating rate: 7.5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: width 825 mm x depth 800 mm x height 870 mm Outer housing dimensions: 1080 mm x 1710 mm x 1950 mm Side feedthroughs: 12 cm and 13 cm Voltage: 400V +6/-10%, 3/N, 50Hz Rated power: 9.5 kW; Rated current: 22 A Refrigerants: R404A / R23 Volume: approx. 570 liters; Weight: 580 kg Important safety information for you as the buyer! The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Type: VTS 7033 Condition: used Scope of delivery: (see photo) Hedslt U Avjpfx Abmsfr (Alterations and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), VLM Climate Corrosion Test Chamber We are offering you a climate-corrosion test chamber from VLM Name: Condensation Water Test Device (Corrosion Test Cabinet) Manufacturer: VLM Korrosions-Prüftechnik GmbH Description: The chamber is designed for testing the corrosion resistance of metallic materials and surface treatments via salt spray corrosion tests (NSS) according to: DIN 50021 SS, ASTM B 117-73, ISO 9227, and other methods, as well as condensation tests. Chamber volume: 400 liters Front door material: Safety glass, clear shield coating on the inside Weight: 140 kg External dimensions (W x D x H): 1100 x 670 x 1090 mm Internal chamber dimensions (W x D x H): 800 x 605 x 920/733 mm Chamber volume: 400 l Door opening (W x H): 740 x 600 mm Maximum sample rod load per rod: 20 kg Operating voltage: 230 Volts Frequency: 50-60 Hertz Power input: 1,850 W Chamber temperature range: Max. 55°C Temperature controller: Microprocessor controller PID Temperature stability: ±0.2 K LED display resolution: 0.1°C Deionized water quality: max. 20 µS/cm Humidifier water consumption: approx. 0.5 l/24 h Test water consumption: approx. 0.4 l/h Water supply pressure: 3/4" 2-4 bar Compressed air requirement: approx. 16 m³/h Type: Salt Chamber SAL 400 V.713.062.000 Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in data and specifications!) Hfsdpfx Absk H Akgsmor For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), IVA Engineering Type: M5386 Environmental and Stability Chamber Dry Hot Air Test Chamber Rated Voltage: 415V AC/20A Hfsdpfxsd Nfrls Abmor Dimensions: 90.55 x 78.74 x 90.55 in – 2,204.60 lb 2300 x 2000 x 2300 mm – 1,000 kg Internal Dimensions: (Height x Width x Depth): approx. 1950 x approx. 1230 x 1510 mm Scope of delivery: (See picture) (Subject to technical modifications and errors; all specifications are subject to change!) For further questions, please feel free to contact us by phone.