Temperatūros spinta -72°C iki +180°C

Weiss TempEvent T/800/70/10 800 Liter

Sąlyga: naudotas, max. grinding length: 300 mm grid. grinding width: 150 mm Table movement - longitudinal: 2 - 20 m/min Grinding wheel speeds: 3000 rpm Ffedpfor Nyatsx Ab Set Electrical connection: 380 V, 1.1 kW Space required: 1500 x 1100 x 1750 mm Weight: 920 kg

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Climate Test Chamber We offer here a Heraeus Vötsch climate test chamber. Heraeus Vötsch climate test chamber with humidity control (water-cooled) Test chamber internal dimensions: width 800 mm x depth 800 mm x height 950 mm Housing dimensions: width 1090 mm x depth 1960 mm x height 1995 mm Specifications for temperature testing: Temperature range: -45°C to +180°C time stability: ±0.1 to ±0.5 K spatial uniformity: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 4.0 K/min Cooling: 3.0 K/min Specifications for climate testing: Temperature range: -45°C to +180°C Temperature deviation at steady state, according to IEC 60068-3-5 depending on the test chamber temperature Ffsdpomt Du Tofx Ab Sot Temperature range: -10°C to +95°C time stability: ±0.1 to ±0.3 K spatial uniformity: ±0.5 to ±1.0 K Humidity range: 10% to 98% RH Humidity deviation over time: +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7.8 kW Rated current: 15.0 A Refrigerant: R452A Test chamber capacity: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 For your security as a buyer, the following information! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) Feel free to contact us by phone for any further questions.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 83040, Throat depth: 150 mm Test height: 200 mm Fsdpfsb Dkh Nex Ab Soft Space requirement: 350 x 600 x 1410 mm

Sąlyga: geras (naudotas), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Tests Specifications: Test Chamber Volume: approx. 1000 L Test Chamber Dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door Opening Dimensions (W x H): 1300 x 680 mm External Housing Dimensions (WxDxH): 2162 x 995 x 2080 mm Operating Temperature Range: 5°C above ambient up to +80°C High-load version for a maximum load capacity up to 350 kg Process Control: Beckhoff PLC, Color Touchscreen Display, Fjdot Igc Sopfx Ab Ssft 50 memory slots for test procedures, 50 memory slots for test segments, Ramps: humidity-temperature across the entire working range, Ethernet interface Electrical Connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, 3/4" tap connection, external thread for connection of an ion exchange cartridge Compressed Air: 7-8 bar Waste Water: Siphon / 30 mm ID hose nozzle Exhaust Air: pipe end OD 75 mm Operating modes: Salt spray (fog) Condensed water (CWC) Ambient air ventilation Hot air Controlled humidity

Sąlyga: labai geros būklės (naudotas), VLM Climate Corrosion Test Chamber We are offering you a climate-corrosion test chamber from VLM Name: Condensation Water Test Device (Corrosion Test Cabinet) Manufacturer: VLM Korrosions-Prüftechnik GmbH Description: The chamber is designed for testing the corrosion resistance of metallic materials and surface treatments via salt spray corrosion tests (NSS) according to: DIN 50021 SS, ASTM B 117-73, ISO 9227, and other methods, as well as condensation tests. Chamber volume: 400 liters Front door material: Safety glass, clear shield coating on the inside Weight: 140 kg External dimensions (W x D x H): 1100 x 670 x 1090 mm Internal chamber dimensions (W x D x H): 800 x 605 x 920/733 mm Chamber volume: 400 l Door opening (W x H): 740 x 600 mm Maximum sample rod load per rod: 20 kg Operating voltage: 230 Volts Frequency: 50-60 Hertz Power input: 1,850 W Chamber temperature range: Max. 55°C Temperature controller: Microprocessor controller PID Fjdpfxek H Akge Ab Soft Temperature stability: ±0.2 K LED display resolution: 0.1°C Deionized water quality: max. 20 µS/cm Humidifier water consumption: approx. 0.5 l/24 h Test water consumption: approx. 0.4 l/h Water supply pressure: 3/4" 2-4 bar Compressed air requirement: approx. 16 m³/h Type: Salt Chamber SAL 400 V.713.062.000 Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in data and specifications!) For further questions, feel free to contact us by phone.

Sąlyga: geras (naudotas), Gamybos metai: 2011, CNC portal flame cutting machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Exhaust table 1 oxy-fuel torch Cutting capacity up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical specifications in detail: 1x oxy-fuel torch (fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units on the gantry Laser pointer with automatic offset transfer iMSNC control parameter database / Windows® Programming system “AsperWin-Basic” for programming directly at the machine control Module macro library “AsperWin Select” Module NC simulator “AsperWin NC-Sim” Module “Plasma marking” (for scribing) via plasma source Module “THC” / Automatic height control via arc voltage USB 2.0 interface for external storage device Remote diagnostics module MicroStep® “iFDS Win” Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply cables Gas hoses for preheating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylen FIT+ 1 capacitive height control IHT / for oxy-fuel 1 electric ignition unit RHÖNA-Acetylen Double-sided cable protection (collision protection) for the gantry via emergency stop Fodpfxoudn Rze Ab Sjft Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / connection to CNC control Module for automatic control of the marking device 101225ä

Sąlyga: labai geros būklės (naudotas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Data for temperature tests: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 Watts Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Heat compensation max.: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following measures are performed on all of our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon completion of testing, the chambers undergo documented trial operation. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Ffedpfx Absqwim Eo Sjt We are happy to answer any further questions by phone.

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Baty SM300 Profile Projector – Compact and Precise Optical Inspection The Baty SM300 Profile Projector is a versatile and precise projector, specifically designed for demanding quality control tasks at the workshop or production level. Featuring a vertical light path and a 300 mm screen, it is ideal for inspecting small and medium-sized workpieces. The SM300 offers a high resolution of 0.5 microns and a measuring range of 150 mm x 50 mm, enabling detailed and accurate measurement of components. The device is available with various magnification lenses, including 10x, 20x, 50x, and 100x, to meet the specific requirements of your inspection tasks. The GMR display, offering full geometric functionality, is available as a display option for this profile projector. These features make the SM300 an ideal choice for use in quality control applications, where precision and efficiency are crucial. Features: - 300 mm screen with finely ground glass for sharp projections - Durable design suitable for use in harsh environments - Magnification options: 10x, 20x, 50x, 100x - Measuring range of 150 mm x 50 mm with 0.5 micron resolution - Integrated profile and surface illumination for crisp and precise images Fsdpfx Ajuyh N Sjb Sjft - Digital angle measurement and full geometric measurement functions with the GMR display system The SM300 is particularly suitable for workshops where reliable and precise inspection is required. Its robust construction ensures long service life and consistently high measurement accuracy, even under challenging conditions.

Gamybos metai: 2020, Sąlyga: labai geros būklės (naudotas), Weiss Model: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor loading: Designed for a maximum payload of 250 kg Key data for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at center of usable space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating: 25 K/min Cooling: 25 K/min (down to -45°C) Heat compensation: max. 8000 W Key data for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98 % RH (relative humidity) Climate performance data (excerpt) Humidity range: 10 to 98 % RH Humidity deviation (over time): At the center of usable space, in steady state, depending on the set point: ±1 to ±3 % RH Temperature deviation (over time): Ffsdpfx Absw R Rt Ie Set At the center of usable space, in steady state, depending on temperature: ±0.1 to ±0.3 K Temperature homogeneity (spatial): Referring to the set value (for ranges > 20 % RH): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with a Greenmode Weight: approx. 2050 kg For your safety as a buyer, the following information: The following points are performed on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All details are without guarantee!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Type: Weiss WT3-340/70 Very good condition Weiss temperature chamber with S!MCON / 32 control, air-cooled Ffodjv Edd Sjpfx Ab Sot (Refrigerant R-404A; conversion to R452A available upon request) Test chamber volume: approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating Data: Test chamber illumination: 24V, 50W halogen bulb Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated current: 12.5 A, Rated power: 4.1 kW Customer-side fuse: 16 A slow-blow Sound pressure level approx.: Measured at 1m distance from front, 1m height: 58 dB(A) Temperature Testing Data: Temperature range: -72 to +180 °C Temporal temperature deviation in usable volume center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If needed, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo documented trial operation with calibrated measuring devices. Condition: Used / very good condition