Druskos purškimo korozijos bandymo spinta

VLM CC 1000-FL HL V.745.672.120

Būklė: geras (naudotas), System: REWA chamber filter press, used Itjdpfxjqakbrs Aaujf Type: 470-15-25K-HP Design: side bar guided Filter plate size: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available to suit the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): flange, tie rods stainless steel, PP or rubber-coated Material (non-product-contacting parts): stainless steel Purchase or rental: Plant inspections by appointment at our facility. Other: We supply the system used, functional or refurbished, adapted to your requirements. Would you like to rent or buy this system? Please contact us, we are happy to assist you.

Būklė: naujas, Gamybos metai: 2018, NEW MACHINE at a special price Tactile Coordinate Measuring Machine by Innometrik Measuring range: 1200 x 3000 x 1000 mm Maximum workpiece weight: 1000 kg Accuracy MPEE: 2.2 + L / 350 (in µm) Scale resolution: 0.1 / 0.5 in µm - Air bearings on all axes Linear speed: 300 mm/s Volumetric speed: 520 mm/s Probe system: Renishaw TP200 incl. 3 modules (SF, HF, LF) and triple probe changer Software: OptiCheck 4.5 & Virtual DMIS (separate partitions); alternatively Polyworks according to customer requirements -Includes PC (Windows 7), alternatively Windows 10 -Includes 2 monitors -Includes mouse/keyboard Picture: Sister machine Ijdpjdyl H Nofx Aauetf

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach. Ijdpfx Ajpugwisaujtf

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ESS B2 - *M 0--.10*, Star screen for screening, for example, soil, compost, wood chips, etc. Weight: 2,700 kg. Adjustable particle size from 12 to 40 mm. Connection: 3-phase 400 V, current 32 A, frequency 50 Hz, total power 11.25 kW. Throughput from 40 to 60 m³/h depending on material and particle size. Delivery time approx. 14 weeks after order confirmation. Iedpfx Aajirnrpjujtf

Būklė: naudotas, LOSER MODEL AA220 DOWEL TRIMMER / TENON CUTTER - USED - Capacity: 7500/1500 dowels per hour Iedpfx Asqpdkcjaujtf - Dowel diameter capacity: 6-18 mm

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Description to follow! Itjdpfxsx A H Rxj Aausf

Būklė: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant Iedpfx Aaetr Dinjustf 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Cell with KUKA KR 180 grinding robot Isdpog Saqvsfx Aauetf Grinding cell Berger 2012 (External Grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot KUKA KR 180 R2500 Extra - Year of manufacture: 2011 - Control system: KRC 4 - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions: 3500 x 30 mm - Max. contact wheel diameter: 200 mm - Motor power: 4 kW 2 x polishing stations, - Polishing wheel diameter: 350 - 600 mm - Power: 5.5 kW Gripper change cabinet Interoll Automation GmbH belt conveyor - Total length: approx. 2,000 mm - Belt width: approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to manufacture any detail as seen in the video.

Būklė: labai geros būklės (naudotas), Zwick Model: BZ2.5/TN1S Zwick Table-Top Testing Machine – Tensile Testing Machine Application Range: Versatile usage range, from plastic and elastomer testing to paper, textile, foam, and wire testing, as well as component testing. Load Frame: Max. test force (tension/compression): 2.5 kN Height (h1): approx. 770 mm Width (incl. electronics unit): 320 mm Depth (incl. electronics unit): 414 mm Working space height, min ... max: Crosshead angle mounted upwards: 227 ... 573 mm Crosshead angle mounted rotated 180°: 57 ... 403 mm (each without coupling bolts) Electrical specifications: Power supply: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Ijdpfxsfnm Dqo Aaujtf Scope of delivery: (See image) (Specifications and technical data subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Baty SM350 Profile Projector – High-Performance Inspection for Demanding Applications The Baty SM350 is an advanced profile projector featuring a 350 mm screen and a robust, precision workstage with a measurement range of 250 mm x 125 mm. It is ideal for precise optical inspections in environments where reliability and accuracy are top priorities. XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands functionality by enabling geometric measurements, including the calculation of angles, radii, and distances. It also allows for the creation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This variant includes optical edge detection and comprehensive report generation, including SPC charts and DXF overlays. Itedpfxouyh Rpo Aausf The device is equipped with a 3-position lens turret, allowing for quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also provides advanced measurement features such as edge detection and DXF overlays. These capabilities make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing environments.