Stalo mašinos

ZwickRoell BZ1,0 / TH1S

Gamybos metai: 2018, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H3000TM, Universal Testing Machine H3000TM – Made in Germany Crosshead travel: 520 mm Working depth: 66 mm Overall height: 1010 mm Iodpfxet Rg H Aj Agfstd Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Displacement resolution: 0.01 mm We offer a very large selection of test fixtures: screw grips, wedge grips, pneumatic and hydraulic grips. Compression plates, bending devices, friction test jigs, and much more. Strain gauges, extensometers, long-travel sensors, clip-on transducers, climate chambers. Load cells available: 50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N Including Hess software for Windows 8, 9, 10 or 11, enabling universal test routines, simple test operations also possible without a PC, and one 5 kN SP 56g screw grip with pyramid or rubber jaws (30x50 mm). Factory calibration certificate with DAkkS-calibrated measuring instruments. Calibration performed in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-column unit featuring a robust construction of aluminium and V2A stainless steel, with ball screw drives, linear ball bearings, and timing belt drive. The bellows cover provides protection for spindles and bearings. The device is microprocessor controlled, equipped with a membrane keypad. Position and force are displayed on a two-line LCD display. The testing machine can be used either in standalone mode or connected to a PC via a USB interface. Position measurement is carried out using an encoder, with a visible LCD resolution of 0.01 mm (internal resolution: 0.0001 mm). Supplied with a standard load cell offering 0.03% linearity and matching calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel ranges: 500 mm or 1200 mm (measured with load cell, without test fixtures). Scope of delivery: One load cell of your choice (50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N), certificate, 220 V cable, USB cable, instruction manual, and CE declaration of conformity. 3000N Load Cell Measurement range: 1–3000N tension and compression, with nominal 2mV/V output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, including 1.5 m connection cable and calibration certificate.

Būklė: naudotas, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of Manufacture: 1977 Drilling Capacity: 32 mm Spindle Mount: MT 3 – Short quill Distance Spindle Nose – Table: 545 mm (short quill) Distance Spindle Adapter – Table: 395 mm (MT Adapter) Throat: 290 mm Quill Stroke: 160 mm Table Size: Ø 545 mm Itsdpfoharwvsx Agfed Column Diameter: 220 mm Spindle Speed: 55 – 1,450 rpm, infinitely variable Motor Power: 1 / 1.6 kW Electrical Connection: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and steplessly via variator gearbox - Intermediate stage for high torque at low speeds - MT Adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swivelling drilling table - Table height adjustment via hand crank - Heavy-duty machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Required space (L x W x H): 1,150 x 650 x 2,000 mm Weight: 850 kg Good condition

Būklė: naudotas, Radial drilling machine CSEPEL Type RFh 75 / 1500 Machine No. 13704 Year of manufacture: 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle taper MT 5 Nominal arm reach 1500 mm Maximum spindle reach 1500 mm (to column) Minimum spindle reach 440 mm (to column) Distance spindle nose – clamping surface 370 - 1700 mm Vertical adjustment of arm 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Quill stroke 380 mm Spindle speed 19–1900 rpm, 21 steps Feed rate 0.047–2 mm/rev, 12 steps Motor power 11 kW Power supply 380 Volt, 50 Hz, 15 kW - Spindle clockwise/anticlockwise operation via hand lever switch - Hydraulic gearshift for spindle speed and feed rate - Hydro-mechanical central clamping - Motorized vertical arm adjustment - No coolant system - Machine lamp - Operating manual included Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Isdpjlhwr Refx Agfstd Weight: 6.3 t Good condition

Būklė: naujas, Gamybos metai: 2025, * 250 lt Netto hacim * Dozaj pompası dahil * Yüksek aşınma direncine sahip PU kaplama (90 Shore) * Yüksek performanslı trifaze tahrik motoru Isdpfxeh I N Ude Agfotd * Atık su tahliyesi için değiştirilebilir valf * Ana şalter ve acil stop düğmesi * Zamanlayıcı ve çalışma saati sayacı * Özel tasarımlı kontrol paneli (AB Standartlarına uygun) dahil

Būklė: labai geros būklės (naudotas), Zwick Model: BZ2.5/TN1S Zwick Table-Top Testing Machine – Tensile Testing Machine Application Range: Versatile usage range, from plastic and elastomer testing to paper, textile, foam, and wire testing, as well as component testing. Load Frame: Max. test force (tension/compression): 2.5 kN Height (h1): approx. 770 mm Itodpfx Asfnm Dqegfsd Width (incl. electronics unit): 320 mm Depth (incl. electronics unit): 414 mm Working space height, min ... max: Crosshead angle mounted upwards: 227 ... 573 mm Crosshead angle mounted rotated 180°: 57 ... 403 mm (each without coupling bolts) Electrical specifications: Power supply: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Gamybos metai: 2011, būklė: geras (naudotas), Offer 24370 Technical specifications: Iodpfx Aot Srkpsgfetd - JUNGHANS sludge filter press with cylinder unit + conveyor belt - Flocculation system - Pumps - Control cabinet with electrical installation - Aluminium water collection tray integrated into the full container floor - Lighting - 4-door sea container - Required space: approx. W 6.0 x H 2.4 x D 2.4 m - Weight: approx. 5000 kg - Separate conveyor belt, length 8.0 m

Būklė: labai geros būklės (naudotas), Haida Model: HD-B604-S Sensor: TECSIS load cell Max. capacity: 2T / 20 kN Iedpfx Ajr Ixq Rogfstd Units: G, kg, N, LB (selectable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping range: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see image) (Specifications and data subject to change and errors reserved!) If you have any further questions, we would be happy to answer them by phone.

Būklė: naujas, *Technical Standard Specification: Device Type: 6/95 Heating Capacity: 6 kW Cooling Capacity: 45 kW Medium: Water up to 95°C Maximum External Volume: 50 l at 95°C *Hydraulic Functional Features: - Cooling and filling controlled by solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring by magnetic float switch - Dirt filter in return flow and cooling water inlet - Reversing circuit for leak-stop operation - Manual tool drainage via leak-stop operation and actuation of a vent valve at the rear of the unit - Fill duration monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meter *Electrical Functional Features: - Control and regulation unit SBCmini, with relay for collective alarm, 230V, located at the rear of the controller on terminal strip Iedpfxofnvvie Agfetd - Heater control via SSR - Control box IP54 - 20mA TTY interface; pin assignment Arburg - Cekon plug 16A *General Features: - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heater made of Incolloy - Device mounted on castors, two of which are steerable with brakes - Additional temperature safety for secure shutdown of the heater via heater circuit protector *Cooling: Cooling capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: G3/8" female thread (Capacity based on 80°C flow temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Max. delivery rate: 40 l/min Max. delivery pressure: 3.8 bar Motor power: 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weight / Colors Dimensions (L/W/H): 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: housing: RAL 7035 light grey; front door: RAL 5015 sky blue *Connections: Circulating medium: G1/2" female thread Cooling water: G3/8" female thread Filling (option) *This device complies with European directives. Other directives and standards are only met if stated in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard are listed in offers or order confirmations.

Būklė: labai geros būklės (naudotas), CTS Type: C-40/60 CTS Compact Climate Chamber, Air-cooled Test volume: 60 litres Itjdpju Hlb Ejfx Agfod Temperature range: -40 °C / +180 °C Humidity range: 10% to 98% relative humidity +10 °C to +90 °C within temperature range +5 °C to +89.5 °C within dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Rated voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated current: 13 A For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) For further questions, we are happy to assist you by phone.

Būklė: reikia remonto (naudotas), tekėjimo ilgis: 400 mm, veleno skylė: 75 mm, veleno greitis (maks.): 3 800 aps./min, General Information about the Machine For sale is a used lathe manufactured by Okuma. The machine is offered as a parts donor. The machine is operational, however not all functions can be guaranteed. The operating keys are missing. The machine is located in our warehouse and can be inspected under power. Technical Data – CNC control: OSP 5000L-G CNC system (German) Itodpfeugmzkjx Agfjd – Tool turret: 12 positions – Chuck diameter: 250 mm – Spindle speed: 70–3800 rpm (11 kW, 30 min; 7.5 kW – continuous duty) – Spindle bore diameter: 75 mm – X-axis travel: 400 x 0.001 mm – Z-axis travel: 500 x 0.001 mm – Cutting feed rate X/Z: 0.01–1000 mm/rev – Rapid traverse up to: 12,000 mm/min – Power supply: 380V – Rated machine power: 21 kVA – Maximum load current: 36A – Machine dimensions (W x D x H): 3.9 m (with chip conveyor) x 1.8 x 1.8 m – Machine weight: 4,500 kg