Medžiagų bandymai pirkti naudotą (489)

Sąlyga: geras (naudotas), Vötsch Type: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-cooled Performance Data: With a temperature change rate of 10 K/min Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1000 mm, Depth 2480 mm Temperature range: -70°C to +180°C Temperature deviation over time: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8000 W Hfedpfoxzgn Iex Abmsr Heat compensation at +20°C: 8000 W Test volume: 480 liters Left side 1x lateral port ∅ 125 mm Left side 1x lateral port ∅ 50 mm Right side 1x lateral port ∅ 125 mm Chamber is water-cooled Test room lighting: Halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1250 kg For your safety as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (see image) (Technical specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Gamybos metai: 2000, veikimo valandos: 104 382 h, Sąlyga: labai geros būklės (naudotas), Vötsch Shock Test Chamber VT 7012 S2 System for Rapid Temperature Cycling Temperature shock testing evaluates the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to quick temperature shifts in air, exposed to alternating upper and lower temperature loads. These cyclic stresses and the accelerated aging caused by temperature changes help reveal potential weaknesses in the specimens. - Vertical arrangement of test chambers - Ball screw drive ensures safe guidance of the test basket - Basket load capacity: 50 kg for VT3 7012 S2 - All-round mesh in the basket secures the test items - High air recirculation rate, short temperature change times, and even temperature distribution inside the test chamber - Hot chamber can be used as a temperature storage unit, cold chamber as a temperature cycling unit - Minimal energy consumption - No compressed air required Hjdpfxex Exmto Abmefr Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Cooling unit: water-cooled Shock cooling (liquid nitrogen cooling) via customer-supplied nitrogen supply External Dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions: Width: 470 mm Depth: 650 mm Height: 410 mm Protection class: Unit: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature Ranges Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature fluctuation over time: ±2 K (in steady state) Temperature fluctuation in space: ±2 K (in steady state, in basket) Heating rate hot chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate hot chamber: K/min Observation window: 355 x 355 mm Tube port: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1,000 kg More new and used items can be found in our shop! International shipping costs available on request!

Sąlyga: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 0032703, Priedai: - Palyginimo plokštelė 63,3 HRC - Palyginimo plokštelė 58,5 HR30N - Tikrinimo svoriai 150, 100, 60, 45, 30 kgf - Išankstinės apkrovos svoris - V formos priekalas - Gulsčiukas - Deimantinis įspraudiklis Hedpfxjx E U U Hj Abmjfr - Plieninis rutulinis įspraudiklis 1/8'' - Plieniniai pakaitiniai rutuliukai 1/8'' - Dulkių apsauginis gaubtas - Naudojimo instrukcija Deimantinis įspraudiklis ties smailės apačia yra šiek tiek pažeistas (nedidelis nuskilimas – žr. nuotraukas).

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM10 Force: 10 kN Crosshead Travel: 700 mm Test Space: 400 mm Total Height: 1230 mm Weight: approx. 85 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 10 kN Hodpfx Abjd R Dpmsmsfr incl. Evaluation Electronics and Basic Software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for quick tests without the need for a PC. For tests requiring data storage and recording of the test curve, our basic software provides control and evaluation capabilities. This enables you to generate various test sequences and create a test protocol. Additionally, you can further process raw data with your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips & Fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Sąlyga: geras (naudotas), Hardness tester in working condition Hfodpfx Abexr Atbemsr

Sąlyga: labai geros būklės (naudotas), Weiss Type: SWT 200/400-S Weiss spray and splash water test chamber Used to test the ingress of water into enclosures. When connected to a timer, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 Part 1 and EN 60529 for tests in accordance with protection classes IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be reduced to a minimum. Features Glass door with wiper Hfsdpexxuytefx Abmsr Pneumatic drive for the oscillating tube Adjustable oscillation angle Interchangeable oscillating tubes Swiveling and interchangeable nozzle holders Adjustable water flow rate and measurement Control of test duration Data for mechanical loading Maximum load with test sample (evenly distributed) Permissible test sample weight for carrier (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class tests Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ±60° Oscillation angle IPX4: approx. ±180° -10° Dimensions: External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Gamybos metai: 1997, Sąlyga: geras (naudotas), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Model: VTR 7033/S Article No.: 60885637 Temperature Chamber Temperature range: -70°C to +180°C Mains voltage: 400 V Rated current: 24 A Rated power: 9.5 kW Refrigerant (high-temperature circuit): R 404 A Refrigerant (low-temperature circuit): R 23 Year of manufacture: 1997 TK 08 You will find more new and used items in our shop! Hjdsuuiv Ispfx Abmofr International shipping costs available on request!

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM3 Force: 3 kN Crosshead Travel: 520 mm Working Depth: 66 mm Total Height: 1036 mm Weight: approx. 40 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm / min Return Speed: 700 mm / min Load Cell: 3 kN Including evaluation electronics and basic software. Our testing machines are fully operable in stand-alone mode via a numerical keypad, allowing for quick tests without requiring a PC. For tests that require data storage or the recording of load curves, the basic software enables control and evaluation. The software allows you to create various test routines and generate a test report. Additionally, it provides the option to export raw data for further analysis in your own programs. Optional features: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping tools: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips. Hedpfxed R Dpuj Abmjfr

Sąlyga: geras (naudotas), LECO C230 CARBON ANALYZER Carbon Determination C230 The LECO C230 carbon analyzer is a microprocessor-based, software-controlled instrument for measuring carbon and sulfur content in metals, ores, ceramics, and other inorganic materials. The C230 utilizes an induction furnace and measures carbon via infrared absorption. The infrared (IR) source consists of a nichrome wire, which is resistively heated to 8,500°C. The IR source emits visible energy as well as all wavelengths of the infrared spectrum. Carbon dioxide can be used as a sample description; for sulfur detection, the same principle applies. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. Energy from the IR source is absorbed when the gas flows through the cell, thereby preventing it from reaching the IR detector. An IR cell is used both as a reference and for measurement. The total carbon present as carbon dioxide is continuously and simultaneously recorded. The initial reference level or baseline for the detector is established by flushing the cell with oxygen to expel residual atmospheric gases. Hodpfx Aboxxaxujmsfr Technical data: Required gas supply: Carrier gas: Oxygen 99.5% pure, 40 psi Pneumatic gas: Compressed air, nitrogen, or argon, 40 psi (2.76 bar), source must be oil- and water-free— gas flow (based on nominal analysis time): Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulators: Oxygen: 501-291 O2 pressure regulator Comp. air: 766-036 air pressure regulator Inert gas: 764-216 inert gas regulator Furnace: Induction, 18 MHz, 2.2 kW Data transmission: Included Data storage: Without PC: 10 sample weights, 50 results, 5 methods Without PC: Internal memory / optional external display Without PC: LCD (16 x 26 characters) Power requirements: Analyzer: 230 V, ±10%, 50/60 Hz, Single phase, 15 Amps max. Operating current: 12 A Standby current: 4 A Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Gamybos metai: 2002, Sąlyga: geras (naudotas), Vötsch VT 4400/S Temperature Test Chamber Manufacturer: Vötsch Hedpfxouuh Trs Abmjfr Model: Vötsch VT 4400/S Specifications for Temperature Testing Temperature Range: -40°C to +120°C Temperature Deviations (stabilized condition) Temporal: ± 1 K Spatial: ± 2.5 K Wall Distance of Measuring Points: 150 mm Temperature Change Rate according to DIN 50011, Part 12: 3 K/min Exterior Cladding: Galvanized, plastic-coated steel sheet Interior Cladding: Stainless steel Insulation: 120 mm, double-layer Door Hinge: Double-winged Floor: Smooth stainless steel Floor Load Capacity: min. 1000 N/m² Point Load Capacity: 750 N Air Circulation: Vertical Temperature Control: Direct Cooling via refrigeration unit Heating by electric heating elements Refrigeration Unit: Two-stage, cascade, water-cooled Refrigerant (medium temp): R 404 A Refrigerant (low temp): R 23 Lighting: 2 x 20 W halogen Control System: Microprocessor-controlled digital program controller Temperature Sensor: Pt 100, DIN IEC 751, Class B Connections Nominal Voltage: 400 V ± 10 %, 3/N, 50 Hz Nominal Power: 27 kW Nominal Current: 47 A Protection Class: IP 20 Inlet: R1* Return: R1* Water Pressure (overpressure): 3 to 6 bar Water Consumption: max. 3 m³/h Water Inlet Temperature: max. 18°C Drain/Condensate Outlet: R1* External Dimensions: W 3700 x D 1550 x H 2100 mm Chamber Interior: W 3000 x D 1250 x H 1610 mm TK-12 You will find more articles – new and used – in our shop! International shipping costs on request!

Gamybos metai: 2024, Sąlyga: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM5 Force: 5 kN Crosshead travel: 520 mm Working depth: 66 mm Overall height: 1036 mm Weight: approx. 48 kg Hsdod R Dqbopfx Abmjfr Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 5 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without the need for a PC. For tests requiring data storage and curve recording, the included basic software provides control and evaluation capabilities. This enables the generation of various test sequences and the creation of test reports. You also have the option to further process raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VTS 7060-5 Halogen bulb 24V, 50W Vötsch temperature test chamber with color touch panel and S!MPAT Temperature range: -70°C to +180°C, water-cooled Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 6 K/min Temperature change rate heating: 6 K/min Test chamber dimensions: Width: 800 mm, Depth: 800 mm, Height: 950 mm Hodpfoxw Uqpox Abmefr External dimensions: Width: 1000 mm, Depth: 1750 mm, Height: 2005 mm Viewing window: Width: 300 mm x Height: 540 mm Test chamber volume: 600 liters Noise level at 1 m distance (free field measurement): < 69 dB (A) Left side port: 50 mm diameter Right side ports: 2x125 mm diameter Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 16 kW, Rated current: 30 A Main fuse (customer-provided): 29 A slow-blow Cabinet is water-cooled Refrigerants: R-404A and R 23 Weight: approx. 675 kg For your safety as a buyer, please note the following information: The following steps will be carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) If you have further questions, we will be pleased to answer them by phone.

Gamybos metai: 1996, Sąlyga: labai geros būklės (naudotas), Vötsch VSKZ 04/120/S Walk-In Climate Test Chamber Manufacturer: Vötsch Model: VSKZ 04/120/S Temperature range: -40°C to +120°C Hfjdpfx Aeuuigyjbmer Mains voltage: 400V Rated current: 95A Rated power: 56 kW Refrigerant: R 404 A Year of manufacture: 1996 External dimensions: W 2850 x D 4100 x H 3080 mm SO-01 You will find more new and used items in our shop! International shipping costs available on request!

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VT 7012 S2 Shock Test Chamber Air-Cooled Dual-Chamber Design Hot Chamber: Temperature range from +50°C to +220°C Temporal temperature deviation at center of workspace: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating 11 K/min Cold Chamber: Temperature range from -80°C to +70°C Temporal temperature deviation at center of workspace: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating 2 K/min Cooling 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400 V +10%, 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R452-A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! We carry out the following steps in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and details subject to change and error!) If you have any further questions, we are happy to assist you by phone. Hfjdpewxc I Usfx Abmsr

Sąlyga: labai geros būklės (naudotas), Vötsch VC 0150 Climate Test Chamber 0°C - +90°C Hedpeuuikfefx Abmefr Manufacturer: Vötsch Model: VC 0150 Climate Test Chamber Voltage: 230 V Rated Power: 1.5 kW Volume: 1540 litres Temperature Range: 0°C to +90°C Humidity: 10% to 98% Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor Controller List price: €19,500 KK-09 You will find more items – new and used – in our shop! International shipping costs on request!

Sąlyga: labai geros būklės (naudotas), RS Simulators RS Simulators ST2K 320/70D Water-Cooled Shock Test System For sale is a high-performance thermal shock test system, model ST2K 320/70D. This unit is ideally suited for standard-compliant thermal shock testing according to DIN EN 60068‑2‑14, including optional humidity testing in the upper test chamber. With its two temperature chambers (–70 °C to +240 °C) and automatic test basket transfer, this unit offers the perfect solution for component, material, and reliability testing in industry, research, and quality assurance. Main Technical Specifications: Temperature Ranges Upper test chamber: +40 °C to +240 °C Temporal deviation: ±0.8 K (to DIN 50011, empty chamber) Lower test chamber: –70 °C to +240 °C Temporal deviation: ±0.8 K (to DIN 50011, empty chamber) Humidity test (optional) – Upper test chamber Temperature: +40 °C to +90 °C Humidity: 20 % to 98 % RH (±2–5 %) Test basket transfer: Vertical movement, < 10 seconds transfer time Power supply: Total power consumption: 16 kVA Hfodpfxswx Ip Ds Abmor Current draw: 32 A Main fuse: 3× 35 A slow-blow Mains connection: 3× 400 V / N / PE / 50 Hz Main supply line: 5× 16 mm² Water & compressed air connections Cooling water inlet: G ¾", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 1.4 m³/h Cooling water return: G ¾", max. 25.2 °C Condensate drain: 2× G ½", 1× G ¼", non-pressurized Deionized water inlet: G ⅜", approx. 3 bar, max. 6 bar Compressed air connection: Quick-release coupling NW 7.2 (G ¼"), min. 4 bar, max. 10 bar Dimensions & Weight: Test basket internal dimensions (type ST2K 320) Internal: width approx. 430 mm, height approx. 470 mm, depth approx. 700 mm External: width approx. 1100 mm, height approx. 2300 mm, depth approx. 2300 mm Weight: approx. 1150 kg Other Technical Data Sound level: approx. 60 dB(A) at 1 m distance (free field) Refrigerants: R-404A: approx. 2.5 kg (GWP 3,800, limit value 0.48 kg/m³) R-23: approx. 0.8 kg (GWP 12,100, limit value 0.68 kg/m³) Permitted operating environment: Temperature: +12 °C to +30 °C Humidity: 25%–75% RH For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) We are happy to answer additional questions by phone.

Sąlyga: geras (naudotas), Vötsch VCS 4100 Climate Test Chamber -40 °C to +180 °C Hfedpfxouuiygs Abmor Manufacturer: Vötsch Model: VCS 4100 Temperature range: -40 °C to +180 °C Mains voltage: 400 V Rated current: 17 A Rated power: 11 kW Refrigerant: R404A KK-07 You can find more items – new and used – in our shop! International shipping costs available on request!

Sąlyga: beveik kaip naujas (naudotas), HALT/ HASS Espec Here we offer you a temperature chamber. Temperature range: -100 to +200°C Table in lower position (W x D x H): 889 x 889 x 889 mm Table in upper position (W x D x H): 889 x 889 x 635 mm Overall dimensions (W x D x H): 1425 x 1748 x 2134 mm Work table: 762 x 762 mm Max. load capacity: 145 kg Acceleration: 5 to 75 gRMS Voltage: 480 or 440 V / 60 A / 3-phase 400 or 380 V / 80 A / 3-phase Type: Qualmark T2.5 + compressor 99480630 Hfedpfxjqwybgj Abmor Condition: used / seulement 147 heures Scope of delivery: (see picture) (Subject to changes and errors in technical data; all information provided without guarantee!) If you have further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), We offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into 3 sections for transport (bolted construction). Temperature range: -30°C to +100°C Refrigerants: 20 kg R-404A + 20 kg R-452A External dimensions: approx. width 3920 mm, depth 7350 mm, height 2600 mm Test chamber internal dimensions: approx. width 3500 mm, depth 5400 mm, height 2110 mm Electrical data: 68 kW rated output Voltage: 3x400V/PE; Current: 135A Model: KKM 40 / 45 S Further technical details to follow! Important information for your safety as a buyer: The following works are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (See photo) Hfjdpfxsqw U Aae Abmer (Subject to changes and errors in the technical specifications!) Please feel free to contact us by phone for further questions.

Sąlyga: naudotas, Vötsch Type: VCS 7034-5 Climate Test Chamber, water-cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% r.h. and +95°C / 50% r.h. Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Hjdsxqzbbepfx Abmjfr Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as a buyer, please note the following information! The following points are carried out on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone.

Sąlyga: naudotas, SincoTec Model: POWER SWING 100 MOT Big Table The POWER SWING 100 MOT from SincoTec is a high-performance resonance testing rig for fatigue testing of materials and components. This system enables dynamic load testing with high forces (up to ±100 kN) with precise control. Typical applications include service life testing, fatigue strength tests, and component validation under realistic conditions. Its robust construction, precise sensors, and stable granite table make this test stand ideally suited for research, development, and quality control in industry and academia. Notes: The resonance test stand is ideal for dynamic load testing of materials and components. Technical Data: General Data – Test Stand: Overall height: 1215 mm (without clamping device) Width: 2005 mm Depth: 1205 mm Maximum force amplitude: 50 kN Maximum total force: ±100 kN Sensor accuracy: min. Class 1 (according to DIN EN 10002-3) Control Cabinet: Overall height: approx. 1800 mm Tabletop height: 1080 mm Width: 650 mm (narrow table) / 1420 mm (wide table) Depth: 700 mm Weight: 180 kg (with granite tabletop approx. 240 kg) Color: RAL 9006 (White Aluminium), tabletop Midnight Installation Requirements: Space required: 4.3 × 3.0 m Required ceiling height: min. 2.5 m Floor load capacity: 2.0 t/m² Hodexrlkvepfx Abmjfr Power supply: 400 V / 50 Hz (three-phase, clockwise rotation) Connection: CEE socket 5-pin, 16 A Fuse protection: 16 A Weight: approx. 3.6 t Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WT3-1000/40 Weiss Temperature Test Chamber with S!MCON / 32 Control, Water-Cooled Control Panel »Touch Panel« All control and operation commands can be triggered on the control panel »touch panel« by simply touching the function symbols. Leveling Feet To compensate for floor unevenness and to ensure adequate ventilation of the machine component, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with cable ports on the right and left sides. Measuring cables and testing equipment can be routed into the test compartment through these ports. Cable ports included in the standard version: R1: Nominal width 125 mm L1: Nominal width 50 mm Test Chamber Volume: approx. 990 liters Test Chamber Dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External Dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Temperature Test Data: Temperature Range: -40 to +180 °C Temperature Fluctuation over Time at Chamber Center: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum Heat Compensation: 4500 W Operating Data: Test Chamber Lighting: Halogen bulb 2x 24V, 50W Rated Voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated Current: 22.0 A, Rated Power: 11.5 kW Hsdpfothhw Ajx Abmsfr Protection (on-site): 32 A slow-blow fuse Sound Pressure Level: Measured at 1m distance from the front, 1m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Sąlyga: labai geros būklės (naudotas), Climats Type: EXCAL 1413-HA Climate Chamber, Air-Cooled The EXCAL is equipped with a 15-inch capacitive multitouch panel PC, SSD storage, Windows 7, and 2 USB ports. This ensures it features the latest state-of-the-art technology. Technical Specifications: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Viewing window: 350 x 380 mm Volume: 138 liters Standard cable ports installed: R1: 80 mm Ø Hfodpfxov Dt T Tj Abmer L1: 80 mm Ø Data for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.8 K Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Data for climate testing: Temperature range: +10 to +90 °C Humidity range: 10 to 98 % RH Operating data: 3/N/Ph+PE 400V ±10% 50 Hz Rated power: 9.8 kVA Refrigerant: R-404A / R-23 Weight: 430 kg Important safety information for buyers: The following steps are performed in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical data and specifications subject to change and error!) For any further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus / Thermo Model: WU 6100 Forced Air Heat Drying Oven 500°C Description: Heraeus WU 6100 Heat and Drying Oven up to 500°C Forced air oven for thermal testing of high-quality materials. Designed for precise heat treatment processes up to 500°C. Provides accurate and uniform temperature distribution, as well as precise maintenance of the selected temperature. Technical Data: Internal chamber volume: 52 L Temperature range up to 500°C External dimensions (W x H x D): 744 x 552 x 535 mm Internal dimensions (W x H x D): 403 x 380 x 370/339 mm Weight: 53 kg 400 V 50/60 Hz 11.4 A 5.4 kW Features: Temperature controller with digital display Over- and under-temperature protection Throttle valve for stepless fresh air and exhaust air adjustment Timer Hsdpfx Abjwq Rl Eomefr Fan speed adjustment for the forced air blower Stainless steel inserts Condition: used Scope of delivery: (see image) (Specifications and information subject to change or error!) For further questions, we are happy to assist you by phone.

Sąlyga: geras (naudotas), Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Specifications for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Change Rate: Cooling: 6.7 K/min Heating: 6.8 K/min Hfodpfx Asuudx Dsbmer Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Points: +23°C and +80°C Specifications for Climatic Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climatic Calibration Points: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerants: R-404A / R-23 Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) Further questions can be answered by phone.