Šoko bandymų kamera –80 °C iki +220 °C

Vötsch VT 7012 S2

Gamybos metai: 2000, veikimo valandos: 104 382 h, būklė: labai geros būklės (naudotas), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes Temperature shock testing is used to assess the resistance of components, devices, and other products to rapid changes in ambient temperature. Test samples are subjected to quick temperature fluctuations in air, with alternating upper and lower temperature loads. By means of these cyclic stresses and the accelerated aging caused by temperature changes, potential weak points in the test item can be made visible. - Vertical arrangement of test chambers - Ball screw drive ensures safe guidance of the test basket - Basket load capacity: 50 kg for VT3 7012 S2 - All-around mesh in the basket secures the test items - High recirculation air rate, short temperature change times, and uniform temperature distribution in the test area - Hot chamber can be used as a temperature storage unit, cold chamber as a temperature change unit - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Guodpsx Exmtjfx Af Dja Cooling system: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen feed External Dimensions Width: 930 mm Depth: 2,115 mm Height: 1,970 mm Test Chamber Dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Unit: IP 42 Control panel: IP20 Control cabinet: IP 54 Technical data for temperature testing in single-chamber operation Temperature Range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K (in stabilized condition) Temperature deviation spatial: ±2 K (in stabilized condition, in basket) Heating rate hot chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate hot chamber: K/min Viewing window: 355 x 355 mm Tube port: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1,000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You will find more articles—new and used—in our shop! International shipping rates on request!

Būklė: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Guodpetr Dinefx Af Dsa Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Vötsch shock test chamber. Water-cooled temperature shock test cabinet Two-chamber design Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold Chamber: Temperature range of the cold chamber: -80°C to +70°C Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2,115 mm, height 1,970+ mm Port diameter: ∅ 67 mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1,000 kg Guodpfxjigg Hno Af Dsa For your security as a buyer, please note the following information! The following procedures are performed on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Model: VT 7012 S2 Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors reserved!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Heated chamber: The temperature range of the heated chamber is from +50°C to +220°C Temporal temperature deviation at the center of the usable volume: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 11 K/min Cooled chamber: The temperature range of the cooled chamber is from -74.5°C to +70°C Temporal temperature deviation at the center of the usable volume: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range heated chamber: +50°C to +220°C Temperature range cooled chamber: -80°C to +70°C Godpox Hhfhsfx Af Djua Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Nominal power: 10 kW Nominal current: 25 A Refrigerant: R-452A / R-23 Weight: 1000 kg For your safety as the buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New charging with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: geras (naudotas), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: - Temperature range: -70°C to +180°C - Temporal temperature deviation at chamber center: ±0.3 to ±0.8 K - Spatial temperature deviation: ±0.5 to ±2 K - Temperature gradient: 1 to 4 K - Rate of temperature change: - Heating: 16 K/min - Cooling: 14.5 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% RH - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1 K - Temperature gradient: 1 to 2 K - Temporal humidity fluctuation at chamber center: ±1 to ±3 %RH - Maximum heat compensation: 8000 W Cabinet Dimensions: - External dimensions (with hinges and door lock): - Height: 1,995 mm - Width: 1,680 mm - Depth: 1,855 mm - External dimensions (without hinges and door lock): - Height: 1,995 mm - Width: 1,300 mm - Depth: 1,855 mm - Internal chamber dimensions: - Height: 950 mm - Width: 1,100 mm - Depth: 950 mm - Test chamber volume: approx. 1,300 liters Feedthroughs: Feedthroughs are installed on the right and left sides of the test chamber allowing test leads and probes to be routed into the chamber. - 1 x R1 NW 125 mm - 1 x R1 NW 140 mm - 1 x L1 NW 50 mm Test Chamber Illumination: - Halogen bulb: 24 V, 50 W Electrical Data: - 3/N/PE AC 400 V ±10% 50 Hz - Rated power: 44.0 kW - Rated current: 63.0 A - Customer-supplied fuse: 100 A (slow-blow) - Maximum heat emission to the environment: 2.2 kW Permissible Sample Weight: - Maximum total shelf load: 100 kg - Chamber floor: 150 kg, removable shelf: 50 kg Refrigerants: R 404A / R 23 Weight: 1,900 kg For your security as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) Guodewvgwbspfx Af Dea (Specifications may be subject to changes and errors!) For further inquiries, we are happy to assist you by phone.

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 26,3 kW (35,76 AG), įvesties srovės tipas: trifazis, aušinimo tipas: oras, bendras svoris: 270 kg, įėjimo įtampa: 400 V, bendras plotis: 750 mm, bendras ilgis: 1 750 mm, bendras aukštis: 1 450 mm, garantijos trukmė: 6 mėnesiai, Luftgekühlter Kaltwassersatz AERMEC ANL102 Z 26,3 kW Kälteleistung: 26,3 kW / 7,48 Tonnen (12/7 — 35°C) Baujahr: 2019 Kältekreis: 1 Stk. Wärmetauscher: Plattenwärmetauscher Verflüssiger: Microchannel, Aluminium Verdichter: 2 Stk. PANASONIC C-SBP160H38B (Scroll) Kältemitteltyp: R410a Anzahl Ventilatoren: 2 Stk. Abmessungen: 1,75 x 0,75 x 1,45 m Gewicht: 270 kg Betriebsstunden: 8.000/8.000 Std. Zustand: Gebraucht, geprüft, voll funktionsfähig ZUSTAND, PRÜFUNG & EINSATZBEREITSCHAFT Der Kaltwassersatz wird einer siebenstufigen technischen Inspektion und Überprüfung der Betriebsparameter unterzogen. Zusätzlich erfolgt ein Probelauf an unserer eigenen Prüfstation – inklusive Wasser- (oder Glykol-)Anschluss und Anpassung der Parameter nach Ihren Vorgaben. Nach der Prüfung erhalten Sie einen detaillierten Prüfbericht zur Anlagenleistung und zum Gesamtzustand des Kaltwassersatzes. Der Kaltwassersatz ist transportfähig und sofort einsatzbereit. Unsere Ingenieure unterstützen Sie bei der Auslegung der benötigten Kälteleistung, der Auswahl des passenden Kühlschemas sowie der Konfiguration der erforderlichen Ausstattungsoptionen. Gedpfxow Ra Rve Af Djua GARANTIE & SUPPORT Die Qualität der Anlage wird mit einer Garantie von 6 bis 36 Monaten bestätigt. Beim Kauf eines Kaltwassersatzes über uns erhalten Sie außerdem: - Kältemittelfüllung; - Öl- und Kältemittelfilterwechsel (bei gebrauchten Geräten); - Technischen Support. LOGISTIK - Weltweite Lieferung möglich - Unterstützung bei Verladung, Exportdokumentation und Logistikabwicklung Lassen Sie sich individuell beraten. Fotos, Videos sowie ein vollständiger Prüfbericht können auf Anfrage umgehend bereitgestellt werden.

Būklė: labai geros būklės (naudotas), Here we offer a shock test chamber. Water-cooled temperature shock test chamber Two-chamber design Hot Chamber: Temperature range of the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold Chamber: Temperature range of the cold chamber: -65°C to +70°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test area dimensions: Width 470mm x Depth 650mm x Height 410mm External dimensions: Width 930mm x Depth 2115mm x Height 1970+mm Nominal power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Operating hours: 27,903 h Gusdpji Az Egefx Af Dja Weight: 1,000 kg For your safety as a buyer, please note the following information! The following work is carried out on all test chambers we offer prior to sale: 1. Functional test and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, which is monitored using calibrated equipment. Type: HT 7012 S2 Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors excepted!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Performance Data: With a temperature change rate of 25 K/min Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm Temperature range: -72°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 Spatial temperature uniformity: ± 0.5 to ± 2.0 Rate of temperature change (cooling): 25 K/min Rate of temperature change (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test chamber volume: 270 liters 2x side ports ∅ 125 mm 1x side port ∅ 50 mm Chamber is water-cooled Chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Gusdpfx Afstz Rqme Dja Rated current: 44 A Refrigerants: R-452A and R-23 Weight: approx. 980 kg Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional checks and replacement of necessary components 2. Refilling with legally approved refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Vötsch Shock Test Chamber We offer you a Vötsch shock test chamber. Water-cooled Temperature range: -80°C to +220°C Hot chamber: +50°C to +220°C Intermediate chamber: -10°C to +90°C Cold chamber: -80°C to +70°C Mains voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Guodpfsn Avcujx Af Dja Rated power: 13.5 kW Refrigerant VC: R404A 3.00 kg p*: 25 bar Refrigerant CC: R23 15 bar p*: 25 bar Condition: used Type: VT 7012 S3 For your security as a buyer, please note the following information! The following procedures are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with refrigerant in compliance with legal regulations 3. Upon successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to change and errors in technical specifications and data!) For further questions, we are happy to provide assistance by phone.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, A Kuttler loading and unloading system for the PCB industry is available. 1) Unloader for slotted magazines Kuttler SUE 50, year of manufacture: 2008, running direction: right to left, operating hours (panel counter): 2.8 million, weight: approx. 800 kg. 2) Loader for slotted magazines Kuttler RLE 160, year of manufacture: 2004, with conveyor belt CO 800, year of manufacture: 2008, running direction: right to left, operating hours (panel counter): 5.4 million. Please note: The system is missing cylinders and brackets for automatic format adjustment. Documentation is available. Inspection on site is possible. Gjdpfxev Daggo Af Dsua