Temperatūros bandymo kamera 335 litrų

Vötsch -70°C bis +180°C VTS 7034-5

Sąlyga: labai geros būklės (naudotas), Type: VCS 7034-5 Fpodpfx Ajxufypsb Ssb Climatic Test Chamber, Water-Cooled Test chamber volume: 335 litres Performance Data for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Rate of change: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climatic Testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port, Ø approx. 50 mm, left side 2 ports, Ø approx. 125 mm, left side 1 port, Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as a buyer, please note the following: The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Sąlyga: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, MITUTOYO Contracer CV-2100M4 Contour Measuring Machine Measuring range horizontal X = 100 mm Measuring range vertical Z = 50 mm Column travel range Z2 = 350 mm Inclination +/- 45° Dimensions (W x D x H): 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Including PC system Fpedpfevun Tpjx Ab Ssb Including 218-001 cross table Including 2028-003 rotating vise

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB(A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, please note the following information! The following work is performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Newly filled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated instruments. Condition: used Fpjdpfx Absir D U Ds Ssb Scope of delivery: (see image) (Subject to changes and errors in technical details and information!) For any further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) Fpsdpfotr Dinjx Ab Sob (Technical data subject to change and error!) We are happy to answer further questions by phone.

Gamybos metai: 2023, Sąlyga: naujas, Chillers with various refrigerants and low GWP values can be ordered directly from the factory. We are happy to advise you on the different refrigerants, applications, and installation requirements. Fpedpohtfggefx Ab Seb

Sąlyga: naujas, *Technical Standard Specification: Device Type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data based on 80°C supply temperature, 15°C cooling water temperature, and a minimum pressure differential of 2 bar between cooling water inlet and outlet) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling with cooling water - Level monitoring by magnetic float switch - Dirt filter in return line and cooling water inlet - Changeover function for leak stop operation (usable up to system shut-off temperature) - Ball valve in supply and return line - Automatic system shut-off dependent on temperature - Fill time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: interface cable - Control and regulation unit SBCmini, with relay for collective alarm, 230V, terminal at rear of controller - Heating control SSR - Control panel IP54 - Interface 20mA TTY; Arburg pin configuration - 16A Cekon plug - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors, two of which are swivel type with brake - Additional temperature safety device for safe heating shutdown on auxiliary relay - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max): 27 l/min Delivery pressure (max): 4.5 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weight/Colors: Dimensions L/W/H: 600 mm x 240 mm x 493 mm (excluding fittings) Weight: approx. 43 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium: G1/2" female thread Fpjdpfx Asfnvwqsb Ssb Cooling water: G3/8" female thread *This device is compliant with European directives. Other directives and standards are only considered fulfilled if confirmed in the order confirmation. This technical specification represents the standard equipment; customer requirements deviating from the standard are specified in offers and order confirmations.

Sąlyga: labai geros būklės (naudotas), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch Temperature Chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Fsdpfxjhrdy So Ab Sopb Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404 A / R 23 Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.8 kW Rated current: 12 A Type: VT 7011 Important information for your peace of mind as a buyer: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Rate of temperature change (cooling): 7.5 K/min Rate of temperature change (heating): 7.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.5 kW Rated current: 22 A Fusing, to be provided on-site: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side port: 50 cm / 125 cm The chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information! The following procedures are performed on all chambers we offer prior to sale: 1. Functional test and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (See picture) Fsdpfx Ashh H Hisb Sjpb (Changes and errors in technical data and specifications excepted!) We will be happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), CTS Test Cabinet / Climate Chamber We are offering a CTS climate chamber for sale. Air-cooled Test chamber volume: 200 liters Internal chamber dimensions: height 750 mm, width 650 mm, depth 400 mm External dimensions: height 1800 mm, width 920 mm, depth 1345 mm Temperature operating range Temperature range: -40°C to +180°C Cooling rate: 4 K/min Heating rate: 4 K/min Maximum heat input at +20°C: 3500 W Temperature stability (temporal): ≤± 0.3 K Climate operating range Temperature range: +10°C to +95°C Humidity range: +10% to +98% RH Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current: 9.4 A Rated power: 4.8 kW Weight: approx. 450 kg Refrigerant: R404A Model: CTS C-40/200 The following points are performed on the chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data and information may be subject to change and error!) Fpedpfxjhwhzwe Ab Seb If you have further questions, feel free to contact us by phone.

Sąlyga: geras (naudotas), VLM Type: V.745.672.120 Model CC 1000-FL HL Fpjdot Igc Sopfx Ab Seb Corrosion Test Chamber for Salt Spray Tests Specifications: Test Chamber Volume: approx. 1000 L Test Chamber Dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door Opening Dimensions (W x H): 1300 x 680 mm External Housing Dimensions (WxDxH): 2162 x 995 x 2080 mm Operating Temperature Range: 5°C above ambient up to +80°C High-load version for a maximum load capacity up to 350 kg Process Control: Beckhoff PLC, Color Touchscreen Display, 50 memory slots for test procedures, 50 memory slots for test segments, Ramps: humidity-temperature across the entire working range, Ethernet interface Electrical Connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, 3/4" tap connection, external thread for connection of an ion exchange cartridge Compressed Air: 7-8 bar Waste Water: Siphon / 30 mm ID hose nozzle Exhaust Air: pipe end OD 75 mm Operating modes: Salt spray (fog) Condensed water (CWC) Ambient air ventilation Hot air Controlled humidity