Ruchser pirkti naudotą (16)

Sąlyga: geras (naudotas), Gamybos metai: 2010, Medžiagų keltuvas, uždėjimo pagalbinė įranga, montavimo keltuvas, Superlift Contractor, kėlimo įrenginys, konvejeris, juostinis konvejeris, transportavimo juosta – įrenginys leidžia vienam asmeniui uždėti profilius ant tokių įrenginių kaip dvikampės pjovimo staklės, laminavimo įrenginiai, armavimo staklės, padavimo žurnalai, apdirbimo centrai ir pan. Kdsdpfx Afeyapgle Ijg - Gamintojas: Ruchser, uždėjimo pagalbinė įranga tipas RU-AH - Keliamoji galia: 30 kg - Kėlimo aukštis: 345 - 1080 mm - Konvejeris: Krups KF30 - Juostos ilgis: 2200 mm - Juostos plotis: 75 mm - Greitis: dažnio reguliavimas 8 - 50 m/min - Matmenys: 2220/1000/H1370 mm - Svoris: 216 kg

Sąlyga: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Iš viso parduodami 8 surinkimo-sukimo stalai. Visi iš Ruchser. Parduodama dėl gamybos nutraukimo. Kdodpfxox U Dkis Af Ijg

Sąlyga: naujas, Staple length, mm Staple width (Rieker width), mm Impact energy, Nm Painting aid for simultaneous painting of sash and glazing bead frame RU-LH Painting aid for glazing bead frames For processing staples L=50mm Length 700 mm, width 500 mm, adjustable working height from 700 - 1200 mm. At each of the 4 corners of the glazing bead frame, one staple is applied. Positioning is performed diagonally so that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, a clamping action is achieved. For painting, the glazing bead frame is positioned about 20 mm in front of the sash. After drying and before fitting the sash, the glazing bead frame is pressed flush into the sash and removed again only before glazing. The staples can be manually pulled out afterwards. Stand frame with support table, vertical 85°, angle adjustable. 2 equalizing frames for different glazing bead thicknesses, operated via foot valve. Price on request plus packaging and shipping Optional at extra cost: Staple pack 26 x 50 mm, 4,300 pcs each EUR 77.00 Footage of the painting aid can be found at the end of the adjacent video! (Technical data according to manufacturer – no liability assumed!) Kedjxpi Efopfx Af Iedg

Sąlyga: naujas, Working length 2750 mm Working height 2500 mm Lift of the worktable 300–1000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° ----- Vertical worktable with lifting device and turning mechanism. Especially suitable for glazing and double-sided sealing of wooden windows. Equipment: - Support section covered with felt - Infinitely adjustable pneumatic lift, lifting range 300 mm – 1000 mm, based on roller conveyor height Kodexmk D Repfx Af Isdg - Turning device for double-sided sealing, with roller conveyor, roller length 150 mm - 2 pneumatic clamps for securing the window on the turning device - Version with special turning mechanism for pushing the window set up on the roller conveyor through the unit when the turning device is engaged (closed) Alternative/optional equipment available on request! Pos. 1.0: Art. No.: 100000 RU-SW3-90° vertical worktable for wooden windows with turning device for glazing and double-sided sealing Angle length 1970 mm, opening angle 90°, max. working width 2750 mm, total length 3050 mm, total width 780 mm, positioning height 1600 mm, support surface with felt. One roller on the left OR right as edge protection for elements up to 2500 mm in height. Pneumatic lifting device 300–1000 mm. Set-up area as roller conveyor with steel rollers, roller length and pitch 200 mm. ----- Total price in this version: on request! ----- Options at additional cost: Pos. 1.1: Art. No.: 5202 EUR 744.00/each Support section with rubber rollers, Ø 48 mm, roller spacing 50 mm, for RU-SW3-90° and RU-SWS3 Pos. 1.2: Art. No.: 7081 EUR 424.00/each Steel angle covered with felt, mounted above the roller bars for RU-SW3-90° These prevent the windows from 'rattling' when being pushed. The additional strips are mounted above all roller bars of the RU-S2. Pos. 1.3: Art. No.: 5056 EUR 129.00/each RU-AK-6 storage box 1000x120 mm, 6 compartments, for hanging in the roller conveyor ----- Total price in this version: on request! Ex works plus packaging and shipping, plus statutory VAT. PDF brochure attached. (Technical specifications according to manufacturer – subject to change!)

Sąlyga: naujas, Glass Bead Nailing Machine "2 P Jumbo automatic E.C." – new – Your Advantages: - The corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames are easy to match Kdodpfx Afsvnh T Ne Ieg 2P Jumbo Automatic E.C. Staple Corner Jointing Machine For stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, top and front clamping device Pressure can be adjusted independently. Insertion of parallel and overlapping staples via electronic programmable control possible. Stapling unit can be mounted on a suitable work table, Operation via foot valve. ----- Price for this version on request! Plus statutory VAT as well as packaging/shipping ----- Images show the 2P Staple Corner Jointing Machine with the optional movable work table (see details under Surcharges) Surcharges: ----- Movable work table Height-adjustable from 700 – 1000 mm, 2 plug-in support rails 1000 mm long, 2 tiltable and movable support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 of which with locking device. ----- Surcharge: 1,321.00 Euros net Staples: Packages 15 mm staples (pack of 2,000 pcs.): price 22.00 Euros 12 mm staples (pack of 3,000 pcs.): price 32.00 Euros 10 mm staples (pack of 3,000 pcs.): price 32.00 Euros Dimensions and Weights ----- Jumbo Automatic E.C.: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices are net. Plus statutory VAT. Ex works plus packaging and shipping (Technical data according to manufacturer – no liability accepted!)

Sąlyga: naujas, Dimensions (L x W) 1400 x 1750 mm Weight, kg Tiltable yes/no: yes RUCHSER Assembly Tilting Table RU-MKS 1.4 ----- Universally applicable work table, e.g. for frame assembly, roller shutter box assembly, glazing bar installation, sash fitting, glazing Equipment, alternative/optional features available on request! Pos. 1.0: Item No.: 8820000 RU-MKS-1.4 Assembly Tilting Table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one fixed to the upper extension, covered with felt. Support surface with width and height/depth extension. Pneumatic tilting function, load capacity 130 kg. Activation via foot pedal. Roller conveyor manually foldable and extendable sideways from 1400-2500 mm, roller length 140 mm (closed). Conveyor height in vertical table position adjustable from 300-380 mm, working height horizontal adjustable from 920-970 mm. !For safety reasons, at least one flat clamping cylinder must be ordered! Pos. 1.1: Item No.: 5582 Pneumatic swivel device for the roller conveyor for MKS Pos. 1.2: Item No.: 21127 Support bar 1400 mm, non-extendable for RU-MKS Pos. 1.3: Item No.: 5585 360° rotating device with pneumatic locking at 180° increments Kdodpfx Aox H Al Aof Ijg Rotation brake operable from both sides When using the rotating device, the minimum roller conveyor height of the MKS table increases to 330 mm Pos. 1.4: Item No.: 6455-01 6 storage bins with 2 compartments each, mountable on pivots; for RU-MKS Pos. 1.5: Item No.: 5597-10 Travel gear for semi-circular guide rails for RU-MKS-P4 Operation via foot pedal, mounted on roller conveyor side. Pos. 1.6: Item No.: 6354-6 3 double-meter semi-circular guide rails 30 x 10 mm. Pos. 1.7: Item No.: 5193-1 Flat clamping cylinder with hand valve, clamping range 130 mm, retractable mounted on support bar, felt-lined at contact surface, installation left or right, please specify. Pos. 1.8: Item No.: 5584 Lifting device 450 mm for working on vertically standing elements. Activated via foot pedal. Maximum load capacity 200 kg for RU-MKS...-1.4 and 140 kg for RU-MKS...-2. Pos. 99.1 Packaging on pallet ----- Total price in this configuration: on request! Video and PDF brochure attached. (Technical data as specified by manufacturer - subject to change or error!)

Sąlyga: naujas, Fitting Storage Yes Kodpst Tq Aaofx Af Iodg Working Width 3000 (3500) mm Tiltable Yes Ruchser RU-BM-3000 (Option: 3500) Sash Assembly Table ----- Manufacturer’s Description: Pos. 1.0 Item 0610000 RU-BM-3000 Sash Assembly Table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver, length 3000 mm, width 1400 mm, working platform tilt adjustable manually. Usable width 2500 mm. Provision for fitting shear or fitting press. 10 swiveling supports for hanging sashes, completely pneumatically foldable to allow unobstructed movement of the sash on the table surface. Device for gauging sash hardware length for fixed and variable/central handle positions and any desired handle height for pre-drilled sashes, color-coded dimension identification for hardware positions. Support height can be set to 50 or 60 mm at a stop. RU-SH, special screwdriver with pneumatic depth stop mounted on sliding carriage, safety control, pneumatic height adjustment, screw feeding device with automatic filling container shutoff, manual entry for a second screw length on the special screwdriver. Accessories included. RA-8, turret stop for 8 screw levels, mounted on the carriage. RA-4 swinging rail depth manually adjustable left/right each with a 4-position turret stop. PSF - Pneumatic clamping device for sashes against side stops. Working height adjustable from 900 - 1000 mm. Please specify whether you require felt, sliding, or brush strips as support surface. Pos. 1.1 Item 6315 RU-BM-... hardware preset per customer specification Pos. 1.2 Item 0500000 Bracket matched to customer punch/shear. For mounting a customer-supplied hardware punch or shear (third-party make) on the sash assembly table. Please specify the make when ordering!!! ----- Price RU-BM-3000 in the above configuration, ex works: on request! ----- Optional Fitting Storage for RU-BM-3000: ----- Variant Fitting Storage, Fixed-Mounted: Price 4,409.00 EUR Item 0630000 RU-BL-30/30 fitting storage, fixed-mounted, mounted above the sash assembly table length 3100 mm, depth 1250 mm, with 3 shelves, each with 10 compartments separated by dividers. Variant Fitting Storage, Free-Standing: Price 5,291.00 EUR Item 0710000 RU-SBL3000/30 fitting storage, free-standing, length 3100 mm, depth 1250 mm, height 2050 mm, frame structure front without supports, 30 compartments, arranged in one row, 10 each separated by dividers, and one continuous top shelf, compartment size: width 280 mm, height 150 mm. 4 pcs corner brackets for corner gearboxes: Price 614.00 EUR Arm length 120 x 120 mm; angle approx. 3° The front edge of the bracket is bent up 5 mm to prevent accidental unloading. 2 pcs left and 2 pcs right under the first shelf of the fitting storage. ----- Surcharge for RU-BM-3500 ----- Item 0610300 RU-BM-3500 Sash Assembly Table for sashes up to max. 3000 mm height with RU-SH, special screwdriver, length 3500 mm, width 1400 mm, working platform tilt manually adjustable, usable width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: 2,831.00 EUR Fitting Storage for RU-BM-3500 (only free-standing possible): Price EUR ...

Gamybos metai: 2013, Sąlyga: naudotas, Įrenginys leidžia vienam asmeniui uždėti profilius ant tokių įrenginių kaip dvigubų kampų pjūklai, laminavimo įrenginiai, armavimo staklės, padavimo sandėliai, apdirbimo centrai ir pan. Ksdpfxexykvge Af Iodg

Gamybos metai: 2012, Sąlyga: labai geros būklės (naudotas), Ruchser roller conveyor for windows with 90° rotation device left/right, length 4400mm Kjdpjlpcc Iofx Af Iodg Electrically driven accumulation rollers with 2 parallel support sections, pneumatically tiltable from vertical 7° outside to vertical 7° inside. Support sections 1900mm high with rubber roller strips. Between the rubber strips, stainless steel plates 2mm lower serve as a gliding surface with clip holders. Infeed and outfeed with edge protection rollers up to 3000mm high using rubber rollers. Infeed conveyor 2000mm, outfeed conveyor 4000mm with driven accumulation rollers. Control system and operator panel mounted on a freely adjustable stand.

Sąlyga: naujas, Number of motors: 2 units Working length: 2650 mm Control: manual Ruchser RU-GLS-ED 45° glazing bead saw ----- Designed for cutting glazing beads in pairs The RU-GLS-ED 45° double glazing bead saw is manually adjustable to size. The machine is designed for the simultaneous cutting of two glazing beads at a 45° angle and is equipped with one fixed and one movable saw unit. The manual length adjustment is equipped with an electronic digital display. Cutting lengths from 150 mm to 2650 mm can be processed. During the cutting operation, the glazing beads are clamped from above and from the front by a pneumatic clamping system to prevent tilting. Operation is via a safety two-hand control. Saw blade diameter: 250 mm, length: 3700 mm, width: 700 mm, voltage: 400 V. Item 1: RU-GLS-ED45° Double Glazing Bead Saw ----- with manual size adjustment, for cutting glazing beads in pairs, cutting angle 45°. Manual length adjustment with electronic digital display, cutting length from 150 – 2650 mm. Pneumatic clamping device from above and from the front. Safety two-hand operation, saw blade diameter 250 mm, length 3700 mm, width 700 mm, voltage 400 V. ----- Base price for the above configuration: on request! ----- Ex works. Packing and shipping not included Options at additional cost: ----- Item 1.1 Insert set for rabbeted glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after assessment of the glazing beads. Depending on the number of glazing beads used, multiple insert sets may be required. In order to determine the exact number needed, we require profile drawings of the glazing beads to be used before order confirmation. Surcharge: on request, after receipt of your glazing bead drawings. Item 1.2 Mounting device for measuring gauge on RU-GL for transferring measured values to the saw, with pneumatic installation. Surcharge: 611.00 Euro Kodpfxoxmk Dqe Af Isdg Item 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm. Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the length of glazing beads. Surcharge: 478.00 Euro Item 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm. Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the length of glazing beads. Surcharge: 428.00 Euro Item 1.5 Operating time switch unit for independent extraction. Adjustable from 5 sec. up to 3 hrs. For each sawing operation, extraction runs automatically for the preset time. If another sawing operation takes place within this time, the extraction time resets. Surcharge: 702.00 Euro Item 1.6 1 set of carbide-tipped saw blades RU-GLS-P45 and RU-GLS-ED45°. D = 250 mm x 3.2/2.2 x 30, 80 teeth, consisting of 1 saw blade each L6444 (right) and L6443 (left) with special 43° grinding. Surcharge: 576.00 Euro ----- All prices in Euro, net, plus statutory VAT. (Technical information as per manufacturer's specifications, without guarantee!)

Sąlyga: naudotas, Dimensions (L, W), mm Weight approx. 90 kg Height adjustable (yes/no): yes Kodpfx Asvu Hfdof Isdg Lift height: 300 - 800 mm Worktable surface: 1,700 x 1,500 mm Maximum table width: 3,800 mm Payload approx. 130 kg Ruchser RU-4-SSP Rotating and Tilting Table ----- Support surface: 1700 x 1500 mm, maximum table width when swung out: 3800 mm, pneumatically tiltable, mitre cut-out, equipped with 6 storage boxes each with 2 compartments, lower pull-out extensions for widening, with 2 support legs and 2 flat clamping cylinders, lifting device from 300 - 800 mm, roller conveyor as base, foldable. Payload capacity 130 kg. Mobility unit with 4 swivel castors with locking mechanism (RU-4SSP) 2 stops for final inspection and sealing Sash assembly fixture with tool tray and adjustable stop for angling for RU-4-SSP Holder for drill, screwdriver gun, etc. with tool holster Mobility unit with flange rollers RU-DKFA and RU-4SSP 3 double-metre running rails for mobility unit 25 x 10 mm ----- Price of the above-mentioned machine on request! Plus packaging and shipping ----- (technical data as per manufacturer’s information - subject to confirmation!)

Sąlyga: naujas, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° ----- Glazing Bead Saw on Sliding Worktable Designed for parallel cutting of glazing beads on the sliding worktable. The RU-GL glazing bead saw is mounted on a sliding worktable with sensing and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a manually movable carriage. Pneumatic clamping device from the top and the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding worktable with felt covering, total length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable support rollers for positioning sashes. Pos. 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H) !!! Mounted on sliding worktable with sensing and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage, manually adjustable. Pneumatic clamping from above and from the side. Safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding worktable with felt overlay, total length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable support rollers for positioning window sashes. ----- Base price as specified above: on request! ----- Plus packaging, shipping, and the current material surcharge of 6% of the total price Options with additional charges: ----- Kjdpfxoxmkz Nj Af Isdg Pos. 1.1 1 Set of carbide-tipped saw blades for RU-GL glazing bead saw D = 200 mm, 64 teeth, consisting of 1 blade each L1233 (left) and L1085 (right), with special 43° grind. Surcharge: 421.00 Euro Pos. 1.2 Holding device for measuring gauge on RU-GL for transferring measured dimensions to the saw, with pneumatic installation. Surcharge: 611.00 Euro Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 478.00 Euro Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 428.00 Euro Pos. 1.5 Spacer set for rabbeted glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after assessment of the glazing beads. Depending on the number of glazing beads used, several spacer sets may be required. To determine the exact quantity, we require profile drawings of the glazing beads to be used before order confirmation. Surcharge: on request, upon receipt of your glazing bead drawings Pos. 1.6 Operating time control for independent extraction system. Adjustable from 5 seconds to 3 hours. With each sawing operation, extraction is activated for the preset time. If another cut is made within the extraction interval, the time restarts. Surcharge: 702.00 Euro ----- Total price ...

Sąlyga: naudotas, Darbinis ilgis 2000 mm Darbinis plotis 1800 mm Kdedjxmk Dkopfx Af Iog Volelio plotis 200 mm 4 vnt. ritininių takelių po 2000 x 200 x 1800 mm vidaus ir lauko apdirbimui

Sąlyga: naujas, Assembly line consisting of: Pos. 1.0 / RU-CBM 4000 Work Table with a 500 mm extended guide rail for the additional installation of an aluminum holder screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, work platform tilt manually adjustable. Mounting for hardware shear or hardware punch. 16 swiveling counter supports for hooking in sashes, completely pneumatically foldable for unobstructed movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/central gear position on pre-drilled sashes, color-based measurement detection of the fittings. RU-SH special screwdriver mounted on a carriage with pneumatic depth stop, safety control, pneumatic height adjustment, screw feed device with automatic shut-off of the refill container (manual loading for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screwing levels mounted on the carriage. RA-4, turret stop for 4 different sash widths mounted on the swiveling table. Sash dimension scanning pneumatically actuated, scanning range up to 2500 mm with simultaneous clamping of the scanner. PSF - Pneumatic clamping device for sashes. Working height adjustable from 900 - 1000 mm. Kdjdpfx Ajd Ih Hujf Ijg Support table covered with felt. Guide rail extended to the left by 800 mm. Pos. 1.1 / 5035-1 Pneumatic tilting device for the working surface with foot valve Pos. 1.2 / 0500000 Bracket adapted to customer’s punch/shear. For mounting a customer-supplied hardware punch or hardware shear (third-party make) on the sash assembly table. Please specify manufacturer with order!!! Pos. 1.3 / 5597-7 Travel assembly for RU-CBM on semi-circular running rails. The running rollers are mounted left and right on the base frame of the table. Pos. 1.4 / 6354-6 3 double-meter semi-circular running rails 30 x 10 mm. Pos. 1.5 / 0730000 RU-SBL3000/40 hardware storage free-standing, length 3100 mm, depth 1250 mm, height 2200 mm, frame on the front side without supports, 40 compartments, in a single row, each 10 separated by partitions and a continuous shelf at the top, compartment size: width 280 mm, height 150 mm. Pos. 2 RU-CSA-SMB aluminum holder screwdriving machine with automatic screw feeding and manual feeding of the aluminum holders from a mobile box with pneumatic positioning device, screwdriver with depth stop and 4-position turret stop. Pneumatic y-axis positioning device against two 6-position turret stops. Feed container for manual feeding of turning holders or clip holders in square format 18.5 x 18.5 mm. The holder is manually pushed into a channel in the box and pneumatically positioned in front of the screwdriver mouthpiece. Profile depth max. 150 mm, screw spacing in y-direction max. 120 mm. Pos. 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum jib version with base column, easy-running jib, and push trolley. Slewing and trolley travel manual by pulling and pushing on the load. Outreach 6 m Construction height 4.461 m Jib lower edge 3.722 m (upper edge 3.9 m) Slewing range max. 270° Steel structure painted in RAL 7035 The base plate is to be anchored to the customer’s hall floor with...

Gamybos metai: 1998, Sąlyga: paruoštas naudoti (naudotas), A Ruchser T-connector assembly device is available for precise and time-saving installation of T-connectors in window or door profiles. Usable length: 6000 mm, max. transom width: 250 mm, profile supports: 6, clamps: 4, indexing stops: 4, working height range: 950 mm–1100 mm, machine dimensions (L/W/H): approx. 6450 mm / 1200 mm / 1750 mm. Documentation is available. On-site inspection is possible. Kdsdpfx Afjw Edpyj Ieg

Sąlyga: labai geros būklės (naudotas), Roller conveyors in lengths of 5000 mm and 6000 mm, width 600 mm, with felt or roller surfaces for loading. Multiple units available! Please inquire. Kodpjmt D Rasfx Af Isdg