Rasa Vamzdžių Lenkimo Staklės pirkti naudotą (48 999)

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, veikimo valandos: 34 797 h, mašinos/transporto priemonės numeris: 2011-0250, Vamzdžio skersmuo (maks.): 600 mm, Vamzdžio ilgis (maks.): 1 500 mm, Lenkimo kampas (maks.): 180 °, lenkimo spindulys (maks.): 200 mm, sienelės storis: 3 mm, Original machine year 1996. In 2011, completely overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feeding length: 1,500 mm Bending angle: max. 180° + springback Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel motions Bending direction: left Forward bending speed: max. 22.0 1/min (infinitely adjustable) Return bending speed: constant 22.0 1/min Twist angle: max. 360° Twist speed: 50 rpm Height adjustment for multi-radius: lowest tube center 55 mm Vertical travel: suitable for 3-groove bending tools MACHINE DETAILS Run-down time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic reservoir volume: 340 l Ihedpfxox Srkle Af Ist Control Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operation and control panel EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail advance and return - Various bending tools for Ø 60 mm tube - Various auxiliary accessories - Control cabinet cooling unit - Foot switch (2 units) - Schwarze-Robitec operation panel - Control cabinet cooling unit Rittal type SK 3361100 Note: The machine could only be tested in setup mode due to lack of operating proficiency. No faults are known. The machine is currently dismantled.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 500 h, valdymo tipas: PLC valdomas, automatizacijos lygis: automatinis, Vamzdžio ilgis (maks.): 3 000 mm, Vamzdžio sienelės storis (maks.): 2 mm, Metalo apdirbimo įmonė parduoda Megabender 030. Įrangoje yra vamzdžių trnyrai: 60,3 mm x 2 mm 50 mm x 2 mm 40 mm x 2 mm 700 kg - Galingas mandrelinis vamzdžių lankstymo įrenginys iki 2" dujiniam vamzdžiui (60,3 mm), pusiau automatinis (vamzdžio slydimo ilgis 3000 mm) - Elektromechaninis lankstymo ašies pavara - Hidraulinis spaudimas - Mandrelio įstūmimas/ištraukimas - 30 programų x 9 lankstymo kampai + korekcijos kampas Isdsv Di Dnepfx Af Ioht Nerūdijantis plienas iki 2 mm Plienas iki 3 mm Varis ir aliuminis iki 4 mm

Sąlyga: naujas, Gamybos metai: 2025, Electric mandrel-free pipe bending machine. A precise and efficient machine designed for bending steel, copper, aluminium, and brass pipes. The possibility to select the optimal bending radius enables high-quality results without material deformation. The featured pipe bender is very easy to operate. Tube bending machines are used for single-piece and small-batch production of components in the automotive, furniture, and architectural industries, as well as for manufacturing garden tools. The main bending die is driven by a reduction gearbox and an electric motor. The device can work in two modes: manual and semi-automatic. Its uncomplicated and robust construction ensures long-lasting, trouble-free operation. Standard equipment: - Digital angle readout - For the BENDMASTER 40A machine, dies are included for pipe diameters: 17.2; 21.3; 26.9; 33.7; 38.1 mm Ijdpfxsvugx Dj Af Isht Standard equipment: - Digital angle readout - For the BENDMASTER 40A machine, dies are included for pipe diameters: 16; 20; 25; 32; 38 mm Technical data: MAXIMUM BENDING ANGLE: 180° DIE ROTATIONAL SPEED DURING BENDING: 5 rpm MAIN MOTOR POWER: 1.5 kW EXTERNAL DIMENSIONS (LxWxH): 720 x 500 x 1030 mm WEIGHT: 330 kg

Sąlyga: naujas, The KPB 81 is a powerful tube and profile bending machine from the KNUTH series, combining maximum bending performance with advanced mechanical engineering. Equipped with three motor-driven rolls and hardened rollers and shafts, it ensures precise bending of medium and heavy steel profiles. The hydraulically adjustable bending rolls provide not only high drive power but also optimal adaptation to various profile shapes. Additionally, the KPB 81 features an adjustable overload protection and offers the flexibility to operate both horizontally and vertically. Standard equipment includes a digital display, operator console, and a footswitch with emergency stop. This machine is ideally suited for metal construction, locksmith workshops, as well as applications in the furniture and advertising industries. Purchase your KNUTH tube and profile bending machine KPB 81 now and benefit from its robust capabilities in tube and profile processing. Ihedpfen Upglsx Af Iot

Sąlyga: geras (naudotas), Gamybos metai: 2005, valdymo tipas: CNC valdymas, - Maks. lenkimo kampas: +/- 180 + 10 ° - Vamzdžio stūmimo ilgis: 4100 mm Ihsdox T Di Ajpfx Af Ist - Apvalus plieninis vamzdis iki 30 x 2,2 mm² - Apvalus nerūdijančio plieno vamzdis iki 30 x 1,5 mm - Kvadratiniai vamzdžiai: 20 x 2,5 mm - Lenkimo laikas 90 laipsnių: 1,5 sek. (išankstinis) - Išilginio padavimo greitis: 450 mm/sek. - Maksimalus lenkimo spindulio diapazonas: 125 mm - Laisvai stovinti lenkimo galvutė, ilgis 850 mm - Lenkimo ašies pavara – elektrohidraulinė

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, Vamzdžio skersmuo 42,0 x 3,0 mm PLIENAS Vamzdžio skersmuo 30,0 x 2,0 mm NERŪDIJANTIS PLIENAS Maks. lenkimo kampas: 180 ° Maks. lenkimo spindulys: 100 mm Lenkimo greitis: 2,0 aps./min. Valdymas: NC Įtampa: 400 V Bendras galios poreikis: 0,55 kW Staklių svoris: apie 115 kg Naujos kaina (dabartinė): apie 4 200 eurų Labai gera būklė / su stovu Ihodpfx Aox U El Isf Iet Aprašymas: - NC elektromechaninės vamzdžių lenkimo staklės, be šerdies * iki 50 programų saugojimas - automatiškai grįžta į pradinę padėtį - maksimali lenkimo galia: plieninis vamzdis 42 x 3,0 mm - puiki lenkimo kokybė net ir mažuose lenkimo spinduliuose (nuo 2x vamzdžio Ø) & lenkimo kampai nuo 0° iki 180° - paprastas valdymas - didelis tikslumas ir patikimumas - greitas įrankių keitimas (per kelias sekundes) - lengva transportuoti - komplektuojama su staklių stovu

Sąlyga: naudotas, Gamybos metai: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Minimum tube diameter: 10 mm Maximum tube diameter: 74 mm Round material (steel) max.: 40 mm Control system: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max. 300 / min. 65 mm Maximum bending angle: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic working pressure, max.: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions LxWxH approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and swivel arm (cold bending machine). Application: Suitable only for processing tubes, round bars, and wires made from steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level change: Travel path = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm Ijdou Ibvhjpfx Af Ieht - Bending dies of different sizes within a die stack can be approached at will. Bending direction: right Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition. *

Sąlyga: naudotas, Gamybos metai: 1999, Pipe diameter up to 60 mm Machine weight approx. 1.8 t Ihjdpfevvnm Sex Af Iot

Sąlyga: naujas, Gamybos metai: 2025, Electric bender for bending pipes and profiles, rods, and flat bars, depending on the bending rollers used. The machine is additionally equipped with a mechanical upper roller pressure adjustment with a vernier scale. An ideal solution for bending arcs, circles, spirals, etc. Includes a foot pedal for left/right drive control. Used in metalworking shops and on construction sites. Maximum pipe bending range up to 30 mm. The bender enables operation both in vertical and horizontal planes. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with a mechanically adjustable upper roller pressure. An ideal solution for bending arcs, circles, spirals. - Bending radius adjustable by the top pressure device with a vernier scale - Application: bending profiles and pipes - Capability to bend various profiles thanks to universal rollers - High dead weight ensuring optimal stability - Ground and hardened guide rollers on the sides - Bending rollers made of durable, hardened steel - Operated with a foot pedal - Vertical and horizontal operation - Left/right operation Standard equipment - Side guide rollers - Foot pedal - Documentation in Polish (DTR) - CE Declaration Technical data Round pipe [mm]: 30 x 1 Rectangular profile [mm]: 30 x 30 x 1 Round bar [mm]: 16 Solid rectangular bar [mm]: 30 x 10 Roller diameter [mm]: 30 Speed [rpm]: 9 Motor power [kW]: 0.75 kW Power supply: 3 phase, 400V Ihedpfou Snlkex Af Ist Dimensions (L x W x H) [mm]: 1200 x 750 x 1210 Weight [kg]: 252

Gamybos metai: 2019, Sąlyga: naudotas, Vamzdžių lenkimo staklės DW75NC Europe Design. Pusiau automatinis su matavimo skydeliais. Pusiau automatinės vamzdžių lenkimo staklės DW75 yra lengvai valdomos, tvirtos konstrukcijos ir užtikrina puikius lenkimo rezultatus. NC programa tiksliai valdo lenkimo kampą (Y ašis) ir sukimąsi (Z ašis). Atstumas tarp posūkių (X ašis) konfigūruojamas naudojant lengvai reguliuojamus ir labai tikslius mechaninius stabdžius. Naujos lenkimo programos įvedimas yra labai intuityvus, naudojant pramoninį jutiklinį valdiklį ir tikslią bei patogią programinę įrangą. Pusiau automatinis vamzdžių lenkimo įrenginys DW75 yra pats efektyviausias įrenginys savo klasėje, sumažinantis energijos sąnaudas. Ihedpfx Asi Ewy Tef Ist BLMA, iš 10 geriausių vamzdžių lenkimo gamintojų, siūlo platų 5 ašių NC vamzdžių lenkimo staklių asortimentą. Pusiau automatinis vamzdžių lankstiklis DW75 yra pagamintas iš aukščiausios kokybės žaliavų, kad būtų užtikrintas maksimalus patvarumas ir ilgas tarnavimo laikas. Naudojami įvairiais pramoniniais tikslais, jie yra labai pripažinti dėl savo specifinio dizaino, tikslumo ir standartinio veikimo. Pagrindinė specifikacija: Maksimali lenkimo galia: ¢75mm x 5mm Maksimalus lenkimo spindulys: R400 mm Lenkimo laipsnis: 0-190° Maksimalus efektyvus atstumas tarp šerdies: 2800 mm Variklio galia: 7,5Kw Maksimalus hidraulinis slėgis: 12Mpa Alyvos bako talpa: 250L Išmatavimai: 400 x 100 x 110 cm Mašinos svoris: 2000 kg

Sąlyga: geras (naudotas), Gamybos metai: 2008, valdymo tipas: CNC valdymas, Vamzdžio skersmuo nerūdijantis plienas: iki 42 x 2,0 mm Vamzdžio skersmuo plienas: iki 42 x 3,0 mm Didžiausias lenkimo kampas: +/- 180 + 10° Atsparumo momentas: 4,1 ccm Darbinis slėgis: 6 bar Bendra galios poreikis: 5,5 kW Staklių svoris apie: 3 t Reikalinga vieta apie: 6100 x 2300 x 1300 mm Ihodpfxjx T Diio Af Ist

Sąlyga: geras (naudotas), Žiedų lenkimo staklės, profilių lenkimo staklės, lenkimo staklės, vamzdžių lenkimo įrankis, vamzdžių lenkiklis, vamzdžių lenkimo staklės, spygliuotos lenkimo staklės -Gamintojas: Dako Gedore, elektrohidraulinis vamzdžių lenkiklis ant mobilios važiuoklės Ihsdpfx Afex Nfhro Ijt -Vamzdžio skersmuo: nuo 3/8" iki 3" -Eiga: 320 mm -Variklis: AEG 1,5 kW -Priedai: įskaitant lenkimo žandikaulius iki 3" (žiūrėti nuotraukas) -Transportavimo matmenys: 1140/1045/H1200 mm -Bendras svoris: 389 kg

Sąlyga: naudotas, Gamybos metai: 1992, Techninės detalės: Vamzdžio skersmuo: 6 mm Iodjwivn Nopfx Af Isht Maksimalus vamzdžio skersmuo: 16 mm Maksimalus lenkimo kampas: 90° Elektrinis variantas – įtampa/dažnis: 220 / 50 V/Hz Bendra galia: 0,75 kW Mašinos svoris apie: 0,145 t Mašinos matmenys I x P x A: apie 1,0 x 0,8 x 1,2 m Panaudojimo sritis: Mini vamzdžių lenkimo staklės su atviru lenkimo galvute. Precizinio plieno vamzdžių apdirbimas pagal DIN 2391/C, medžiaga 35.4 NBK, Ø 6 – 16 mm. -su hidrauline pavara -8-ių kampų lenkimo pasirinkimas iki 180° -vamzdžio atramos ilgis 1 m -avarinio stabdžio mygtukas -pervežama su fiksavimo stabdžiu -gręžimo galvutė pasukama (vertikalioje ar horizontalioje padėtyje) -reikalingas hidraulinis alyva = apie 20 litrų (pvz., Esso Nuto 32) Priedai: įvairūs lenkimo įrankiai

Sąlyga: naudotas, Gamybos metai: 1999, Vamzdžio skersmuo: 12-54 mm (varis / nerūdijantis plienas) mm Serijos numeris: EBD Darbo režimas: Pjovimas / Nušlifavimas / Pakartotinai Ihsdpfx Asumyhlsf Iot Volelių greitis: 450 aps./min m/min

Sąlyga: naujas, Gamybos metai: 2025, Electric pipe and profile bending machine for bending tubes, profiles, rods, and flat bars depending on the type of installed rollers – bending dies. The machine is additionally equipped with a mechanical upper roller pressure system with vernier scale. An ideal solution for bending arches, circles, spirals, etc. The substantial dead weight ensures optimal stability during operation. The set includes a foot pedal for left/right drive control. Used in locksmith workshops and on construction sites. Maximum pipe bending range up to 70 mm. Machine Characteristics - Bending radius adjustable via the top-mounted pressure device with vernier scale - Application: bending profiles and pipes - Capability to bend various profiles thanks to universal rollers - Substantial dead weight ensuring optimal stability - Side-guided rollers, ground and hardened - Bending rollers made of durable, hardened steel - Operation via foot pedal - Left/right operation Standard Equipment - Side guide rollers - Foot pedal - Universal rollers - Polish language technical documentation - CE declaration Ihodpfx Aou Snkgjf Iet Technical Data Round pipe [mm]: Ø 70 x 2 Rectangular profile [mm]: Ø 60 x 60 x 3 Round rod [mm]: Ø35 Solid rectangular element [mm]: Ø 35 x 35 Roller diameter [mm]: 50 Motor power [kW]: S1 1.5/ S6 2.2 Power supply: 3 phase, 400 V Dimensions (LxWxH): 900 x 850 x 1700 Weight [kg]: 550

Sąlyga: naujas, Gamybos metai: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: Ijdpfondn Agex Af Ijht • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Sąlyga: geras (naudotas), Gamybos metai: 1998, Vamzdžio skersmuo: 20 - 60,3 mm Vamzdžio užmaunamoji ilgis: 4500 mm Staklių svoris apytiksliai: 0,11 t Ijdpfox T Dhfjx Af Ijht Bendras galios poreikis: kW Reikalinga erdvė apie: 5700 x 1600 x 900 mm - Išankstinis 4 lenkimo kampų pasirinkimas per pasukamą reguliatorių

Sąlyga: naudotas, Gamybos metai: 1990, Technical details: Tube diameter: 42 mm Isdpfx Asu Ibvuof Ieht Wall thickness: 25 mm Round steel: max. Ø 20 mm Square material: tube 25 x 25 mm Maximum bending radius: inner max. Ø 20 mm and outer max. Ø 170 mm Bending speed: not specified °/s Tube feeding length: 3000 mm Control system: RC 7000 software Machine weight approx.: 2.8 t Dimensions of control cabinet: 800 x 700 x 2000 mm Approximate machine dimensions (LxWxH): 5.1 x 0.7 x 2.0 m Application: Processing of formable pipes, rectangular tubes and round rods, as well as square tubes RC7000 software designation, manual programming Rectangular tube 42 x 20 x 2.5 mm Bending direction: leftward Operation via control panel Accessories: -various bending tools for pipe Ø 25 mm -12 various collets -various auxiliary and clamping devices

Sąlyga: naujas, Gamybos metai: 2025, Electric tube and profile bending machine for bending pipes, profiles, rods, and flat bars depending on the installed bending rolls (bending dies). The machine is additionally equipped with a mechanical top roll pressure adjustment with a vernier scale. An ideal solution for bending arcs, circles, spirals, etc. Its substantial own weight ensures optimal stability during operation. Comes complete with a foot pedal for left/right drive control. Used in metalworking shops and construction sites. Maximum tube bending capacity up to 50 mm. The bender allows operation in both vertical and horizontal planes. Machine features: - Electric tube and profile bending machine. Allows work both vertically and horizontally. - Equipped with a mechanically adjustable top roll pressure. - Ideal for bending arcs, circles, and spirals. - Bending radius set by means of a top-mounted pressure device with vernier scale. - Applications: bending of profiles and pipes. - Possibility of bending various profiles thanks to universal rolls. - Very high own weight for optimal stability. - Ground and hardened guide rolls on the sides. - Bending rolls made from durable, hardened steel. - Foot pedal operation. - Operation in vertical and horizontal orientation. Ihsdpeu Snm Iofx Af Ist - Left/right drive operation. Standard equipment: - Side guide rolls - Foot pedal - Various sets of rolls - Machine documentation in Polish - CE Declaration Technical data: - Material: round tube [mm]: 50 x 2 - Material: rectangular profile [mm]: 50 x 50 x 2 - Material: round bar [mm]: 35 - Material: solid rectangular bar [mm]: 35 x 35 - Roll diameter [mm]: 40 - Motor power [kW]: S1 1.5 / S6 2.2 - Power supply: 3-phase, 400V - Dimensions (L x W x H) [mm]: 900 x 850 x 1700 - Weight [kg]: 485

Sąlyga: naujas, Gamybos metai: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right or left bending. The plug-in bending tools enable rapid changeover to different tube sizes. Fast hydraulics to reduce non-productive time is an important factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick as required) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, length measurements, and rotation angles for up to 50 bending sequences on one tube length. To monitor springback values, there is a freely programmable database for up to 200 materials. Ihodpfx Aong Exasf Ist The machine has 2 operating modes: In "Simple Bending", the length and rotation of the arcs relative to each other are automatically displayed. In "Controlled Bending" mode, the data is entered beforehand, and during bending a continuous actual/target comparison occurs. This ensures mispositions within a tolerance window are eliminated, minimizing user-related error rates. General error messages are displayed in full text on the large screen. Mandrel retraction is programmable and can be automatically withdrawn early once the bend angle is reached. The compact drive unit with detachable mandrel holder offers advantages for use on-site as well as for special applications with very large tube feed and is also available as a stationary version with an organization system for tools and mandrel rods. The affordable alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g., chemical industry • Metalworking • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bend angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum 180º bending result • Weight 800–900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-release chuck • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our demo room • Consultation and information session at your site • Consulting and handling of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Sąlyga: geras (naudotas), Gamybos metai: 1994, valdymo tipas: CNC valdymas, valdiklių gamintojas: Siemens, valdiklio modelis: 840 D, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle: +/- 190° Connection rating: 400 V / 50 Hz / 85 A Dimensions (L x W x H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection rating: 400 V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm A few mandrels had specifications engraved directly on them. These had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; Ihodpjx T Dgusfx Af Ist 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has a value of approximately €150,000.

Sąlyga: naudotas, Gamybos metai: 1993, Technical details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control for programming: Gelma MM-1 Tube loading length: 1,800 mm Machine weight approx.: 0.232 t Machine dimensions approx. LxWxH: 1.9 x 0.7 x 1.3 m Semi-automatic tube bending machine Modes of operation: manual as well as semi-automatic Application: For multiple, repeatable tube bending processes (e.g., hydraulic piping) The swiveling unit features preselection for three different bending angles in both single and automatic modes. Currently installed on the machine is a stop rod for tube size Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Equipment/accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm Ijdpou Ibyyefx Af Ioht *

Sąlyga: naujas, Gamybos metai: 2025, Precise and efficient industrial pipe bending machine for bending steel, copper, aluminium, and brass pipes. The option to select the optimal bending radius allows for high-quality results without material deformation. This bender is very user-friendly. Pipe benders are used for single-piece and small-batch production of parts in the automotive, furniture, architectural, and garden tool manufacturing industries. The main bending die is driven by a reduction gearbox and an electric motor. The machine operates in two modes: manual and semi-automatic. Its uncomplicated and robust design ensures long-lasting, trouble-free operation and guarantees ease of use. Standard equipment: - Digital angle readout - The BENDMASTER machine is equipped with dies for pipes with diameters: 38.1; 48.3; 70 mm Technical specifications: - MAXIMUM DIAMETER OF BENT PIPE: 70x5 mm - MAXIMUM DIMENSION OF BENT SQUARE PROFILE: 50x50x2 mm - MAXIMUM BENDING ANGLE: 270° - DIE ROTATIONAL SPEED DURING BENDING: 1.2 rpm - DIE ROTATIONAL SPEED DURING RETURN: 2.4 rpm - MAIN MOTOR POWER: 5 kW - EXTERNAL DIMENSIONS: 1300x700x900 mm - WEIGHT: 680 kg For more information, feel free to contact us by phone or email. Please visit our website to view our full offer. Iedpfevugv Ajx Af Isht

Sąlyga: geras (naudotas), Gamybos metai: 1996, valdymo tipas: CNC valdymas, Vamzdžio skersmuo: 4–28 mm Sienelės storis: / mm Minimalus lenkimo spindulys: 1,5 x D – 2,0 x D mm Valdymas: Siemens LOGO Tiekimo našumas: 4,5 l/min Didž. lenkimo kampas +/-: 190° Nominalus slėgis: 250 bar Darbinis slėgis: 3095 bar Isdpfx Afex Sqcgj Ijht Tiekimo našumas: 4,5 l/min Bendra galios poreikis: 1,5 kW Pavara: Hidraulinis cilindras ir ritininė grandinė

Sąlyga: naudotas, Gamybos metai: 1997, Technical details: Tube diameter: 4.75 - 8.0 mm Wall thickness: - mm Minimum bending radius: various mm Maximum bending angle: 180° Compressed air: min. 4.5 bar Total power requirement: approx. 10 kW Machine weight approx.: 6.0 t Machine dimensions approx. (LxWxH): 6.3x3.7x2.0 m Control cabinet dimensions: 1.8x0.5x2.7 m Operator console dimensions (LxWxH): 0.85x0.68x1.65 m Ihjdeu Ibukjpfx Af Iet Fully automatic, numerically controlled system For bending hydraulic lines and automotive brake lines of various lengths. - Variable number of bends possible (max. 100 bends per tube) - 2 different, independent bending modules. Each module features 2 NC axes with functions: "Longitudinal movement" (axis 1 + axis 3) traversing speed max. 2.0 m/sec. and "Bending head rotation" and "Bending" (axis 2 + axis 4) max. bending angle 180° - Program memory for 250 lines - The loading unit consists of a manually refillable drum magazine (capacity in drum magazine tube Ø=4.75mm to Ø=8.0mm for 500/1000 pieces) - Loading via swing-arm inserter - Operator terminal Bundy GHF 60134 Accessories: - Various individual and add-on components - incl.