Žiedas Lenkimo Staklės pirkti naudotą (48 360)

Sąlyga: naujas, Akyapak Akbend Ring/Profile Bending Machine APK 35 Description • Machine base frame • Horizontal and vertical operation • Foot pedal control • Standard (split) rollers • 2 driven rollers • CE marking / Declaration of Conformity • Operating manual in German Technical Details • I-steel, flat: 120 x 15 (Ø 750) mm • I-steel, upright: 60 x 10 (Ø 800) mm • Angle iron: 50 x 5 (Ø 1200) mm • Round material: 35.0 (Ø 800) mm • Max. tube diameter: 70 x 2 (Ø 1200) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m/min • Top roller diameter: 155 mm • Bore: 50.0 mm • Total power requirement: 1.5 kW Dkedpod Er S Iefx Ab Sjg • Weight: 320 kg • Dimensions (L x W x H): 730 x 830 x 1350 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9314, valdiklio modelis: Beckhoff mit Addison DataBend, sienelės storis: 3 mm, darbinis ilgis: 6 000 mm, ruošinio skersmuo (maks.): 76 mm, Įranga: CE žymėjimas, TECHNINĖS DETALĖS Didžiausias skersmuo: 76 mm Didžiausias sienelės storis: 3 mm Didžiausias lenkimo ilgis: 6 000 mm Dedpfxox Rbf Nj Ab Sekg ĮRANGOS DETALĖS Valdymas: Beckhoff su Addison DataBend Matmenys ir svoris Matmenys (I x P x A): 8 000 mm x 2 000 mm x 2 000 mm Transportavimo svoris: 6 100 kg Transportavimo paketai: 1 ĮRANGA Į komplektą įeina keli strypai ir lenkimo formos Dokumentacija CE ženklinimas

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, bendras svoris: 14 000 kg, darbinio aukščio: 1 000 mm, aliuminio lakšto storis (maks.): 3 mm, darbinis ilgis: 2 160 mm, TECHNINĖS DETALĖS Dsdpsx Ngpkjfx Ab Sjkg Didžiausias lenkimo ilgis: 2 160 mm Didžiausias lakšto storis (plienas 400 N/mm²): 2,0 mm Didžiausias lakšto storis (nerūdijantis plienas): 1,5 mm Didžiausias lakšto storis (aliuminis): 3,0 mm Minimalus lenkiamo ruošinio ilgis (be kampinių detalių): 260 mm Minimalus lenkiamo ruošinio ilgis (su 30 mm kampinėmis detalėmis): 450 mm Minimalus lenkiamo ruošinio ilgis (su 50 mm kampinėmis detalėmis): 500 mm Didžiausias lenkiamo ruošinio plotis išore: 1 500 mm Minimalus lenkiamo ruošinio plotis viduje: 150 mm Didžiausias lenkiamo ruošinio aukštis (keturpusis): 203 mm Šoninis laisvas plotas prie kampinių detalių: 30/50 mm Laisvas plotas prieš viršutinio rėmo įrankį: iki 60 mm Lenkimo svirties pasukimo kampas: 180° Darbinis aukštis: 1 000 mm MAŠINOS DUOMENYS Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 5 350 x 7 300 x 2 450 mm Svoris apytiksliai: 14 000 kg Didžiausia pavaros galia: 25 kW Pastaba: Nuotraukose matoma vakuuminė sukrovimo sistema, kaklo sriegimo įrenginys ir suvirinimo įrenginys nėra įtraukti į pardavimo ir pristatymo komplektą.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, veikimo valandos: 34 797 h, mašinos/transporto priemonės numeris: 2011-0250, Vamzdžio skersmuo (maks.): 600 mm, Vamzdžio ilgis (maks.): 1 500 mm, Lenkimo kampas (maks.): 180 °, lenkimo spindulys (maks.): 200 mm, sienelės storis: 3 mm, Original machine year 1996. In 2011, completely overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feeding length: 1,500 mm Bending angle: max. 180° + springback Dedpsx Srklofx Ab Sokg Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel motions Bending direction: left Forward bending speed: max. 22.0 1/min (infinitely adjustable) Return bending speed: constant 22.0 1/min Twist angle: max. 360° Twist speed: 50 rpm Height adjustment for multi-radius: lowest tube center 55 mm Vertical travel: suitable for 3-groove bending tools MACHINE DETAILS Run-down time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic reservoir volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operation and control panel EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail advance and return - Various bending tools for Ø 60 mm tube - Various auxiliary accessories - Control cabinet cooling unit - Foot switch (2 units) - Schwarze-Robitec operation panel - Control cabinet cooling unit Rittal type SK 3361100 Note: The machine could only be tested in setup mode due to lack of operating proficiency. No faults are known. The machine is currently dismantled.

Gamybos metai: 2001, Sąlyga: paruoštas naudoti (naudotas), bendras svoris: 3 750 kg, bendras aukštis: 1 600 mm, gaminio ilgis (maks.): 4 700 mm, ašių skaičius: 6, Bendroji informacija Įrenginio svoris: 3750 kg Aukštis: 1600 mm Pagrindinė pavara Ašių skaičius: 6 Lenkimo ilgis: 3000 mm Matmenys Dksdox Hbk Ropfx Ab Ssg Įrenginio ilgis: 4700 mm Ši 6 ašių PEDRAZZOLI Bend Master 42 MRV IMS CNC lenkimo staklė pagaminta 2001 m. Didžiausias vamzdžio skersmuo: 42 mm, mažiausias vamzdžio skersmuo: 6 mm, didžiausias lenkimo spindulys: 270 mm. Galia: 22 kW, lenkimo ilgis iki 3000 mm. Puiki galimybė įsigyti PEDRAZZOLI Bend Master 42 MRV IMS CNC profilių lenkimo stakles. Susisiekite su mumis dėl išsamesnės informacijos apie šį įrenginį. Pritaikymo sritys Lenkimas

Sąlyga: labai geros būklės (naudotas), For sale, we offer a Hauxia press brake. This is a demonstration machine that was used for prototyping in our production facility. Therefore, it has very few operating hours. The press brake is sold including tools. See photos. Technical data: - Bending force: 40T - Bending length: 1600mm - Distance between uprights: 1200mm - Stroke (Y-axis): 150mm - Open height: 390mm - Table width: 120mm - Working speed: 15mm/s Dedpfxsixl Tge Ab Sskg - Rapid traverse speed: 150mm/s - Return speed (upwards): 100mm/s - Control axes (8 + 1 axes): Z1, Z2, Z1, Z2, R1, R2 + V - Power: 5.5 kW - Control system: Delem DA-66T (multilingual) - Operating manual: English Special net price: €19,000 Inspection possible by prior appointment. Location: 89-600 Chojnice If interested, please contact us.

Sąlyga: naujas, The KPB 81 is a powerful tube and profile bending machine from the KNUTH series, combining maximum bending performance with advanced mechanical engineering. Equipped with three motor-driven rolls and hardened rollers and shafts, it ensures precise bending of medium and heavy steel profiles. The hydraulically adjustable bending rolls provide not only high drive power but also optimal adaptation to various profile shapes. Additionally, the KPB 81 features an adjustable overload protection and offers the flexibility to operate both horizontally and vertically. Standard equipment includes a digital display, operator console, and a footswitch with emergency stop. This machine is ideally suited for metal construction, locksmith workshops, as well as applications in the furniture and advertising industries. Purchase your KNUTH tube and profile bending machine KPB 81 now and benefit from its robust capabilities in tube and profile processing. Dedpfx Aen Upgleb Sskg

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 2008G048, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, veleno skersmuo: 80 mm, bendras svoris: 2 000 kg, TECHNINĖS DETALĖS Velenėlių skaičius: 3 vnt. Varomų velenėlių skaičius: 3 vnt. Veleno skersmuo: 80 mm STAKLIŲ DETALĖS Valdymo tipas: CNC Vertikali/horizontali: Taip Pavaros tipas: Hidraulinė Matmenys ir svoris Matmenys (I x P x A): 940 mm x 1.400 mm x 1.300 mm Svoris: 2 000 kg Transportavimo paketai: 2 vnt. Dedpfxex Rbcze Ab Sskg ĮRANGA Papildomi velenėliai Skaitmeninis indikatorius

Sąlyga: naujas, Gamybos metai: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer only for customers who participated in a demonstration before purchase – at the Otinus machine showroom in Bydgoszcz. Some of our machines are AVAILABLE FROM STOCK. Hydraulic Press Brake “PBO-2106-PRO DA-69T” Technical Specifications - Nominal pressing force: 600 kN - Motor power: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5,400 kg - Oil tank capacity: 140 l - Maximum bending length: 2,100 mm - Distance between uprights: 1,600 mm - Beam width: 1,580 mm - Table height: 880 mm - Maximum opening height: 475 mm - Maximum beam stroke: 210 mm - Table width: 60 mm - Throat depth: 410 mm Tooling - Automatic, servo-driven backgauges on linear guides: 2 pcs. - Front sheet supports: 2 pcs. - Backgauge travel (X-axis): Electric motor - Ram adjustment (Y-axis): Independent Y1 and Y2 axis control via servo drive - Punch clamping type: quick-change AMADA style Controller “Delem DA-69T” - Efficient bending thanks to automatic control of 8 axes. - Stores 500 programs, each with 25 steps and 99 repetitions. - Up to 30 punches/dies can be stored. - Control with 2D/3D programming mode. - 17-inch TFT touchscreen. - Windows-based system with dedicated software (option to create programs on a PC). - Bending compensation controlled by the controller. - Advanced Delem controller design. - USB port for device connectivity. - Connection area for the angle measurement sensor. - Controller and sensors protect each axis from collisions. High-Quality Components - German brand hydraulic valve Rexroth Djdjvwmgtspfx Ab Sokg - Electrical components from Schneider - Safety circuit elements from Omron and Schneider Safety The machine is supplied with a CE Declaration of Conformity. Financing For customers interested in financing Otinus machines, we offer support in securing financing. We also encourage you to use our consulting services. We cooperate with various banks to find the best leasing, loan, or credit offer tailored to your needs. The following services are included in the machine price: A two-day training and machine installation - First day (up to 8 hours): Installation and training on the control unit. - Second day (up to 8 hours): Independent operation under supervision of our technician → Possibility to program specific parts as required by the customer. Telephone support by an Otinus specialist From 7:30 a.m. to 9:00 p.m. (Mon–Sat): 8-hour package to be used within 12 months Terms of Cooperation 24-month warranty Preparation and lead time: approx. 6–8 weeks. Not applicable if the machine is marked “available from stock.” The machine is brand new. Warranty and post-warranty service provided by the seller. The customer is responsible for the machine once it is unloaded and moved on their premises.

Sąlyga: naudotas, Gamybos metai: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Minimum tube diameter: 10 mm Maximum tube diameter: 74 mm Round material (steel) max.: 40 mm Control system: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max. 300 / min. 65 mm Maximum bending angle: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic working pressure, max.: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions LxWxH approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and swivel arm (cold bending machine). Application: Suitable only for processing tubes, round bars, and wires made from steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level change: Travel path = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a die stack can be approached at will. Bending direction: right Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition. * Dksdpfx Aju Ibvhob Ssg

Sąlyga: naudotas, KRAMER Swivel Bending Machine Type A-Maut. II 1000 Serial No. 48 287 Year of manufacture: 1990 Working length: 1060 mm Max. sheet thickness: 3.75 mm Clamping beam stroke: 180 mm Adjustability of the bending beam: 60 mm Backgauge: 480 mm Bending beam drive power: 4 kW Clamping beam drive power: 1.5 kW Connection: 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via preselect angle dial - One-piece pointed rail 135° Dkedofnabyopfx Ab Seg - Backgauge with handwheel adjustment and simple scale - Continuous backgauge rail - Triple electric foot switch Required space (L x W x H): 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Equipment: 1 right-hand gripper feed 3 pressing modules, each with 180 kN = total 540 kN 4 standard slide units 1 narrow slide unit Working range: Dksdpfxoma S Nre Ab Seg Wire diameter range: up to 10 mm Strip width: up to 100 mm Feed length: up to 250 mm Output: up to 135 cycles/min

Sąlyga: naujas, Gamybos metai: 2024, Hydraulic Press Brake PBO-2563-CNC OT-41 Technical Specifications - Rated force: 630 kN - Maximum bending length: 2,500 mm - Depth (distance between tool and back wall): 250 mm - Maximum stroke of bending beam: 120 mm - Maximum opening height: 370 mm - Distance between uprights: 2,000 mm - Maximum backgauge travel: 600 mm - Motor power: 5.5 kW - Length: 2,600 mm - Width: 1,400 mm - Height: 2,200 mm - Weight: 3,700 kg Equipment - Front supports: 2 pcs. - Backgauge travel (X-axis): Servo-driven - Ram adjustment (Y-axis): Servo-driven - Backgauge finger height adjustment (R-axis): Manual - Punch clamping system: AMADA-type quick clamping CNC OT-41 Control The Otinus CNC control features a user-friendly and intuitive menu. The software automatically calculates the bending angle. The large color touchscreen remains clearly visible from any angle. Manual Crowning (optional*) This feature ensures the customer can always achieve a consistent bending angle along the entire workpiece length. Automatic Crowning (optional*) Enables the controller to automatically monitor and adjust crowning, ensuring optimal setting values at all times. OCS - Oil Cooling System The oil cooling system ensures machine parameter stability, even during extended continuous operation. Expert Support We maintain constant communication with our customers. When purchasing a machine, you will receive a technician support package from Otinus experts. Dkedpfsgi Dphjx Ab Sjg Experience Our Machines Take part in a live demonstration conducted by a qualified Otinus technician to showcase the full capabilities of the machine. Technical drawings and sample materials can be provided upon request. Scope of Delivery: A two-day operator training and commissioning package: - Day 1 (up to 8 hours): Commissioning and control system training. - Day 2 (up to 8 hours): Independent operation with technician supervision, including programming of specific components. Telephone support by a specialist - Available 07:30–21:00 (Mon–Sat) – an 8-hour support package to be used within 12 months. Free rental of transport rollers and two jacks for easier on-site installation. Rollers and jacks are provided upon prior request (at least 7 days before the machine’s delivery). Terms and Conditions - 24-month warranty. - Delivery time: approx. 6–8 weeks. Not applicable for in-stock machines. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The customer is responsible for the machine during unloading and transportation on their premises.

Sąlyga: naudotas, Gamybos metai: 1992, Techninės detalės: Vamzdžio skersmuo: 6 mm Maksimalus vamzdžio skersmuo: 16 mm Maksimalus lenkimo kampas: 90° Elektrinis variantas – įtampa/dažnis: 220 / 50 V/Hz Bendra galia: 0,75 kW Dsdpfxowivn Ne Ab Sjkg Mašinos svoris apie: 0,145 t Mašinos matmenys I x P x A: apie 1,0 x 0,8 x 1,2 m Panaudojimo sritis: Mini vamzdžių lenkimo staklės su atviru lenkimo galvute. Precizinio plieno vamzdžių apdirbimas pagal DIN 2391/C, medžiaga 35.4 NBK, Ø 6 – 16 mm. -su hidrauline pavara -8-ių kampų lenkimo pasirinkimas iki 180° -vamzdžio atramos ilgis 1 m -avarinio stabdžio mygtukas -pervežama su fiksavimo stabdžiu -gręžimo galvutė pasukama (vertikalioje ar horizontalioje padėtyje) -reikalingas hidraulinis alyva = apie 20 litrų (pvz., Esso Nuto 32) Priedai: įvairūs lenkimo įrankiai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Įranga: 1 važiuoklės įtraukimas dešinėje 1 ekscentrinė presė 250 kN 4 standartiniai važiuoklės agregatai 1 siauras važiuoklės agregatas Darbinė sritis: Vielos storio diapazonas: iki 6,0 mm Juostos plotis: iki 80 mm Dkjdor D N Eqjpfx Ab Sog Pritraukimo ilgis: iki 520 mm Galingumas: 10 - 250 vnt./min.

Sąlyga: naudotas, Techniniai duomenys: Didžiausias lenkimo kampas: 0 - 225° Darbinė įtampa: 380 V Apsisukimai per minutę: 5–16 aps./min Betoninio plieno lenkimo staklės Perfekt 55KA, PA, PLA – aukštos efektyvumo gamybinė mašina. Dėl valdymo su keturiais skirtingais lenkimo greičiais ši mašina veikia itin ekonomiškai. Lenkimo kampas be žingsnių nustatomas nuo 0 iki 225 laipsnių kairiajam arba dešiniajai sukimuisi. Koregavimo potenciometras su medžiagos grįžtamojo elastingumo kompensavimu – idealiai tinka vidutinėms ir didelėms serijoms. Dkjdex Adbnjpfx Ab Ssg PA programavimo valdymo blokas: suktukais galima be žingsnių užprogramuoti aštuonis skirtingus lenkimo kampus nuo 0 iki 225 laipsnių iš anksto. Be priedų!

Sąlyga: naudotas, Technical Details: Sheet width: 2300 mm Sheet thickness: 6 mm Max. bending capacity (round): not known mm Frame opening: 3210 mm Top roll diameter: Ø 190 mm Side roll diameter: Ø 150 / 2 pieces mm Machine dimensions approx. LxWxH: 3.55 x 1.2 x 1.6 m Machine weight approx.: 2.3 t Dkodpfou Icd Tjx Ab Seg Total power requirement: 9 kW Steel frame, double I-beam, welded Top roll: free-running; adjustment = 150 mm in length via manual lever; support bearing can be folded out for opening Side rolls: motor-driven; adjustment = fixed The machine does NOT comply with UVV safety regulations!

Sąlyga: naudotas, Gamybos metai: 1990, Technical details: Tube diameter: 42 mm Wall thickness: 25 mm Round steel: max. Ø 20 mm Square material: tube 25 x 25 mm Maximum bending radius: inner max. Ø 20 mm and outer max. Ø 170 mm Bending speed: not specified °/s Tube feeding length: 3000 mm Control system: RC 7000 software Machine weight approx.: 2.8 t Dkedpfx Abeu Ibvue Sog Dimensions of control cabinet: 800 x 700 x 2000 mm Approximate machine dimensions (LxWxH): 5.1 x 0.7 x 2.0 m Application: Processing of formable pipes, rectangular tubes and round rods, as well as square tubes RC7000 software designation, manual programming Rectangular tube 42 x 20 x 2.5 mm Bending direction: leftward Operation via control panel Accessories: -various bending tools for pipe Ø 25 mm -12 various collets -various auxiliary and clamping devices

Sąlyga: naudotas, Techninės detalės: Didžiausias lenkimo kampas: 180 ° Dedpfjxu Dxqjx Ab Sokg Darbinis aukštis: 350–550 mm Darbinė įtampa: 380 V Apsisukimai per minutę: 10–20 aps./min Maks. strypų skaičius: 1-4 mm Bendras energijos poreikis: 1,3/2,1 kW Apytikslis mašinos svoris: 690 kg Mašinos matmenys (IxPxA): 1,2 x 0,87 x 1,2 m dvi stalo sukimosi greičiai darbo režimo jungiklis automatiniam, impulsiniam ir nuolatiniam veikimui keturios bepakopės reguliuojamos priešpriešinės juostos Be priedų!

Sąlyga: naudotas, Gamybos metai: 2006, Technical Details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): 1.9 x 2.6 x 1.0 m Transport dimensions: 2.6 x 1.8 x 1.0 m Single and double bending of reinforcing steel possible. Dsdpju Ibu Refx Ab Sekg Number of bending formers: 2 units Bending angles: 40°; 60°; 75° Bar diameter: Single bend = Ø 12–50 mm, Double bend = Ø 12–35 mm Operation via control panel with touch screen Bending table: - Ø 480 mm - Rotational speed: 7.5 / 15 rpm - Bending pin hole: Ø 48 mm (16 positions) - Center pin: Ø 50 x 94 mm Counter-holder bars: - 2 units, length = 840 mm - Manual travel adjustment: 100 mm - 13 holes, size Ø 48 mm Accessories: Bending attachments: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for table 8x counter-holders, various shapes 1x bending tray

Sąlyga: naudotas, Gamybos metai: 1993, Technical details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control for programming: Gelma MM-1 Tube loading length: 1,800 mm Machine weight approx.: 0.232 t Machine dimensions approx. LxWxH: 1.9 x 0.7 x 1.3 m Semi-automatic tube bending machine Modes of operation: manual as well as semi-automatic Application: For multiple, repeatable tube bending processes (e.g., hydraulic piping) The swiveling unit features preselection for three different bending angles in both single and automatic modes. Currently installed on the machine is a stop rod for tube size Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Dedpfsu Ibyyjx Ab Sokg Equipment/accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm *

Sąlyga: naudotas, Technical details: Sheet thickness: 1 mm Frame opening: 2,255 mm Maximum bending angle: 130° Total power requirement: 2.25 kW Approx. machine weight: 1,400 kg Machine dimensions (LxWxH): approx. 2.7 x 1.15 x 1.3 m Machine without foot switch; however, it is pre-wired for one. Dodpfx Abewq I U Re Sekg The previous owner converted the upper beam adjustment to 60 mm; greater adjustment is only possible by reverting the modification. The foot control for automatic operation is missing. Manual operation is functional. No back gauge.

Sąlyga: naudotas, Gamybos metai: 1992, Technical Details: Sheet width: 1550 mm Sheet thickness: 2.5 mm Frame clearance: 1630 mm Blade length: 1550 mm Stroke adjustment, upper beam: 90 mm manual / 70 mm hydraulic Stroke adjustment, lower beam/bending beam: 105 mm manual Stroke adjustment, bending beam: 40 mm Dedpfx Aou Ib Anjb Sekg Max. bending angle: 93° (L-/Z-bending) and 180° for folding Back gauge: no Total power requirement: 4.5 kW Machine weight approx.: 1.8 t Machine dimensions approx. (LxWxH): 2.6 x 1.1 x 1.7 m Hydraulic unit dimensions: 1400 x 700 x 1480 mm Bending capacity: 2.5 mm at approx. 400 N/mm² tensile strength Hydraulics: OILTECH with approx. 200 liters

Sąlyga: naudotas, Gamybos metai: 1988, Technical details: Sheet width: 2050 mm Sheet thickness: 2 mm Frame width: 2400 mm Blade length: 2050 mm Stroke adjustment (upper beam): 250 mm Stroke adjustment (lower beam): 100 mm Maximum bending angle: 180° Rear gauge – adjustable: with guide rails, mm Working pressure: 5.0 MPa Total power requirement: 2.2 kVA Machine weight approx.: 2.3 t Machine dimensions (LxWxH): 3.5 x 1.0 x 2.2 m Hydraulic unit dimensions: 0.75 x 0.55 x 0.80 m HYDRAULIC SWING BEAM FOLDER Operation via control panel with console and foot switch Bending angle: sharp bend up to 135° with 2 mm sheet Dedpfeu Ib Dfox Ab Sjkg Upper beam stroke: 250 mm Lower beam stroke: 100 mm Bending beam stroke: 100 mm Bending clearance: 7 mm with scale indicator

Sąlyga: naudotas, Gamybos metai: 1960, Technical details: Sheet width: 2000 mm Sheet thickness: 4 mm Support width: 2070 mm Top roll diameter: Ø142 mm (driven) Lower roll diameter: 1st roll Ø 145 mm (driven) Lower roll diameter: 2nd roll Ø 145 mm (idler) Lower roll adjustment: manual/mechanical/hydraulic: 1st roll approx. 20 mm manually Lower roll adjustment: manual/mechanical/hydraulic: 2nd roll approx. 180 mm manually Height above floor: 950 mm Total power requirement: approx. 4.0 kW Machine dimensions approx. LxWxH: 3.0 x 1.0 x 1.2 m Machine weight approx.: 2.5 t Mechanical 3-roll plate bending machine Operation: Hand switch / foot switch forward/reverse 2x emergency stop * Dkjdpou Icfwjfx Ab Sog