Laura Vamzdžių Lenkimo Staklės pirkti naudotą (48 575)

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, veikimo valandos: 34 797 h, mašinos/transporto priemonės numeris: 2011-0250, Vamzdžio skersmuo (maks.): 600 mm, Vamzdžio ilgis (maks.): 1 500 mm, Lenkimo kampas (maks.): 180 °, lenkimo spindulys (maks.): 200 mm, sienelės storis: 3 mm, Original machine year 1996. In 2011, completely overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical systems extensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube feeding length: 1,500 mm Bending angle: max. 180° + springback Ffsdsx Srklspfx Ab Sot Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel motions Bending direction: left Forward bending speed: max. 22.0 1/min (infinitely adjustable) Return bending speed: constant 22.0 1/min Twist angle: max. 360° Twist speed: 50 rpm Height adjustment for multi-radius: lowest tube center 55 mm Vertical travel: suitable for 3-groove bending tools MACHINE DETAILS Run-down time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic reservoir volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operation and control panel EQUIPMENT - Automatic cold tube bending machine - Tube positioning unit - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail advance and return - Various bending tools for Ø 60 mm tube - Various auxiliary accessories - Control cabinet cooling unit - Foot switch (2 units) - Schwarze-Robitec operation panel - Control cabinet cooling unit Rittal type SK 3361100 Note: The machine could only be tested in setup mode due to lack of operating proficiency. No faults are known. The machine is currently dismantled.

Sąlyga: naujas, The KPB 81 is a powerful tube and profile bending machine from the KNUTH series, combining maximum bending performance with advanced mechanical engineering. Equipped with three motor-driven rolls and hardened rollers and shafts, it ensures precise bending of medium and heavy steel profiles. The hydraulically adjustable bending rolls provide not only high drive power but also optimal adaptation to various profile shapes. Additionally, the KPB 81 features an adjustable overload protection and offers the flexibility to operate both horizontally and vertically. Standard equipment includes a digital display, operator console, and a footswitch with emergency stop. This machine is ideally suited for metal construction, locksmith workshops, as well as applications in the furniture and advertising industries. Purchase your KNUTH tube and profile bending machine KPB 81 now and benefit from its robust capabilities in tube and profile processing. Fodpon Upglofx Ab Soft

Gamybos metai: 2019, Sąlyga: naudotas, Vamzdžių lenkimo staklės DW75NC Europe Design. Pusiau automatinis su matavimo skydeliais. Pusiau automatinės vamzdžių lenkimo staklės DW75 yra lengvai valdomos, tvirtos konstrukcijos ir užtikrina puikius lenkimo rezultatus. NC programa tiksliai valdo lenkimo kampą (Y ašis) ir sukimąsi (Z ašis). Atstumas tarp posūkių (X ašis) konfigūruojamas naudojant lengvai reguliuojamus ir labai tikslius mechaninius stabdžius. Naujos lenkimo programos įvedimas yra labai intuityvus, naudojant pramoninį jutiklinį valdiklį ir tikslią bei patogią programinę įrangą. Pusiau automatinis vamzdžių lenkimo įrenginys DW75 yra pats efektyviausias įrenginys savo klasėje, sumažinantis energijos sąnaudas. BLMA, iš 10 geriausių vamzdžių lenkimo gamintojų, siūlo platų 5 ašių NC vamzdžių lenkimo staklių asortimentą. Pusiau automatinis vamzdžių lankstiklis DW75 yra pagamintas iš aukščiausios kokybės žaliavų, kad būtų užtikrintas maksimalus patvarumas ir ilgas tarnavimo laikas. Naudojami įvairiais pramoniniais tikslais, jie yra labai pripažinti dėl savo specifinio dizaino, tikslumo ir standartinio veikimo. Pagrindinė specifikacija: Maksimali lenkimo galia: ¢75mm x 5mm Maksimalus lenkimo spindulys: R400 mm Lenkimo laipsnis: 0-190° Ffedpfx Aoi Ewy Tsb Sot Maksimalus efektyvus atstumas tarp šerdies: 2800 mm Variklio galia: 7,5Kw Maksimalus hidraulinis slėgis: 12Mpa Alyvos bako talpa: 250L Išmatavimai: 400 x 100 x 110 cm Mašinos svoris: 2000 kg

Sąlyga: geras (naudotas), Žiedų lenkimo staklės, profilių lenkimo staklės, lenkimo staklės, vamzdžių lenkimo įrankis, vamzdžių lenkiklis, vamzdžių lenkimo staklės, spygliuotos lenkimo staklės -Gamintojas: Dako Gedore, elektrohidraulinis vamzdžių lenkiklis ant mobilios važiuoklės Fedpfjx Nfhrox Ab Soft -Vamzdžio skersmuo: nuo 3/8" iki 3" -Eiga: 320 mm -Variklis: AEG 1,5 kW -Priedai: įskaitant lenkimo žandikaulius iki 3" (žiūrėti nuotraukas) -Transportavimo matmenys: 1140/1045/H1200 mm -Bendras svoris: 389 kg

Sąlyga: naujas, Gamybos metai: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: Fedpfx Abondn Age Sjft • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, mašinos/transporto priemonės numeris: 6713-2023-2009, valdymo tipas: PLC valdomas, automatizacijos lygis: pusiau automatinis, pavaros tipas: hidraulinis, Vamzdžio skersmuo (maks.): 60 mm, Vamzdžio ilgis (maks.): 6 000 mm, bendras ilgis: 6 500 mm, bendras plotis: 1 000 mm, bendras aukštis: 1 400 mm, galia: 5,2 kW (7,07 AG), Vamzdžių lenkimo staklės Gelber Bieger Tipas: S03-60 Pagaminimo metai: 2009 Diametras: 03–60 mm Ilgis: 6 m Elektromechaninis lenkimo ašies pavara SPS valdymas Lenkimo kampo raiška: 0,1° elektroninis ilgio ir pasukimo matavimas rankinė atmušų sistema su pravažiavimo atmušais Pasukimas kas 15° Hidraulinis vamzdžio spaudimas su reguliuojamu spaudimo slėgiu Programuojamas šerdies atitraukimas Trijų žiuželių griebtuvas Fedpfx Abexuii Us Sjft Sustiprintas šerdies laikiklio pailginimas iki 6 m Vamzdžių lenkimo programinė įranga Įskaitant įrankius šiems diametrams: 50 mm, 42,5 mm, 40 mm, 35 mm, 30 mm, 25 mm, 20 mm Atsiėmimas iš gamyklos, be pakuotės

Sąlyga: naudotas, Gamybos metai: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Minimum tube diameter: 10 mm Maximum tube diameter: 74 mm Round material (steel) max.: 40 mm Control system: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max. 300 / min. 65 mm Maximum bending angle: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic working pressure, max.: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions LxWxH approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and swivel arm (cold bending machine). Application: Suitable only for processing tubes, round bars, and wires made from steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level change: Travel path = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a die stack can be approached at will. Bending direction: right Ffjdpfeu Ibvhex Ab Sjt Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition. *

Sąlyga: naujas, Gamybos metai: 2026, Mandrel-free tube bending machine RB 54 - NC controlled, with large program memory Item number: 4300054 NC control for setting the bending angle Up to 50 programs can be stored High-quality, robust construction Ffedpovk Scgefx Ab Set Quick tool change Purely motor-driven Automatically returns to home position TECHNICAL DATA General Information Max. bending radius: 162 mm Max. bending angle: 210° Bending speed: 2 rpm Torque: 2341 Nm Dimensions and Weights Length (product) approx.: 600 mm Width/depth (product) approx.: 220 mm Height (product) approx.: 470 mm Weight (net) approx.: 107 kg Bending Capacities Bending capacity tube material 420 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity tube material 350 N/mm² (Ø x wall thickness): 54 x 4 mm Bending capacity tube material 650 N/mm² (Ø x wall thickness): 42 x 3 mm Electrical Data Drive motor power: 1.1 kW Connection voltage: 400 V Power supply frequency: 50 Hz Location: ex stock - available immediately -

Gamybos metai: 1969, Sąlyga: labai geros būklės (naudotas), Parduodama vamzdžių lankstymo staklė su šerdimi Schratze-Wirtz WE2W0DS. Įrenginys visiškai veikiantis, su gausiu įrankių komplektu. Schratze-Wirtz WE2W0DS Pagaminimo metai: 1969 Ilgis: 9600 mm Plotis: 3500 mm Aukštis: 2000 mm Ffjdpfx Abepxkwle Sjt Vamzdžių lankstymo įrankiai: fi 83 - R300 fi 88,9 - R300 fi 101,6 - R250, R400 fi 108 - R450 fi 114,3 - R550 fi 133 - R400 fi 137 - R500 fi 168 - R700 fi 193 - R600 fi 219 - R640, R800

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1995, MARK / Ridgid vamzdžių lenkimo staklės Fjdex Ivpwjpfx Ab Soft Tipas: 2H B Be įrankių

Sąlyga: naujas, Gamybos metai: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right or left bending. The plug-in bending tools enable rapid changeover to different tube sizes. Fast hydraulics to reduce non-productive time is an important factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick as required) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, length measurements, and rotation angles for up to 50 bending sequences on one tube length. To monitor springback values, there is a freely programmable database for up to 200 materials. The machine has 2 operating modes: In "Simple Bending", the length and rotation of the arcs relative to each other are automatically displayed. In "Controlled Bending" mode, the data is entered beforehand, and during bending a continuous actual/target comparison occurs. This ensures mispositions within a tolerance window are eliminated, minimizing user-related error rates. General error messages are displayed in full text on the large screen. Mandrel retraction is programmable and can be automatically withdrawn early once the bend angle is reached. The compact drive unit with detachable mandrel holder offers advantages for use on-site as well as for special applications with very large tube feed and is also available as a stationary version with an organization system for tools and mandrel rods. The affordable alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g., chemical industry • Metalworking • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bend angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum 180º bending result • Weight 800–900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-release chuck • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our demo room • Consultation and information session at your site • Consulting and handling of leasing/financing purchase through JUTEC • Trade-in of your current machine Ffodpfjng Exaox Ab Set • Service contracts, maintenance at your location

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Ercolina CML TB-76 Rohrbiegemaschine Ffsdpfx Aju H Ibneb Sot Ausgezeichneter Zustand Baujahr 2006 Fußpedal Gewicht: 193 kg Stromversorgung: 415 V / 3-Phasen

Sąlyga: naudotas, Gamybos metai: 1992, Techninės detalės: Vamzdžio skersmuo: 6 mm Maksimalus vamzdžio skersmuo: 16 mm Maksimalus lenkimo kampas: 90° Elektrinis variantas – įtampa/dažnis: 220 / 50 V/Hz Bendra galia: 0,75 kW Mašinos svoris apie: 0,145 t Mašinos matmenys I x P x A: apie 1,0 x 0,8 x 1,2 m Fsdpjwivn Njfx Ab Sjft Panaudojimo sritis: Mini vamzdžių lenkimo staklės su atviru lenkimo galvute. Precizinio plieno vamzdžių apdirbimas pagal DIN 2391/C, medžiaga 35.4 NBK, Ø 6 – 16 mm. -su hidrauline pavara -8-ių kampų lenkimo pasirinkimas iki 180° -vamzdžio atramos ilgis 1 m -avarinio stabdžio mygtukas -pervežama su fiksavimo stabdžiu -gręžimo galvutė pasukama (vertikalioje ar horizontalioje padėtyje) -reikalingas hidraulinis alyva = apie 20 litrų (pvz., Esso Nuto 32) Priedai: įvairūs lenkimo įrankiai

Sąlyga: naujas, KNUTH hidraulinis vamzdžių lankstymo įrenginys 1/2 (1/2"–2") iš vamzdžių lankstymo mašinų kategorijos – tai galingas ir kompaktiškas sprendimas vamzdžių ir profilių apdirbimui. Ši mobilioji vamzdžių lankstymo mašina aprūpinta rankine hidrauline pompa ir puikiai tinka didesnio skersmens plieninių vamzdžių lankstymui. Su 10 t slėgio jėga galima vamzdžius lankstyti iki 90° naudojant matricas, kurios padengia populiariausias vamzdžių dimensijas. Pridedamas trikojo stovas užtikrina stabilumą ir patogumą lankstymo metu. Kompaktiška konstrukcija leidžia įrenginį lengvai naudoti skirtingose vietose. Galite būti tikri, kad šis tvirtas vamzdžių lankstymo įrenginys atitiks jūsų poreikius. Norėdami gauti daugiau informacijos arba užsisakyti, nedvejodami pateikite užklausą internetu. Atraskite vamzdžių lankstymo įrenginių privalumus ir pasirūpinkite šiuo efektyviu KNUTH įrenginiu jau dabar. Ffjdpfsuzlh Ijx Ab Sjt

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1996, Vamzdžio skersmuo (maks.): 127 mm, Lenkimo kampas (maks.): 182 °, lenkimo spindulys (maks.): 400 mm, mandrilo ilgis: 4 000 mm, bendras svoris: 16 000 kg, bendras ilgis: 7 000 mm, bendras plotis: 2 200 mm, bendras aukštis: 1 800 mm, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, padavimo ilgis Z ašis: 4 000 mm, sienelės storis: 5 mm, Įranga: dokumentacija / vadovas, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s ±0.1° Mandrel length 4,000 mm Ffjdpsu Rf E Eefx Ab Sot Weight, kg 16,000 Motor power kW / 40 Feed rate 900 mm/sec Tolerance grade 0.05–0.1°/mm Tooling: 63 mm

Sąlyga: reikia remonto (naudotas), Funkcionalumas: neveikiantis, Gamybos metai: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model/Type: CNC 80 E-MR Year of construction/new: 2004/2006 Condition: needs repair CNC: CNC PC control, Beckhoff Technical Specifications: Maximum tube diameter x wall thickness: 60 mm x 3 mm Minimum tube outside diameter: 16 mm Minimum bending radius to tube center: 25 mm Maximum bending radius to tube center: 240 + 50 mm Maximum bending angle: 180 ° Maximum tube lift length: 1000 mm Bending direction: right Machine weight: 7,000 kg Total installed power: 39 kW Voltage: 400 V / 50 Hz Current: 100 A Machine dimensions: 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed system for slideways - Automatic tube feeding and rotating device - Electric mandrel bending unit Ffodpfx Absxzubve Sjt - Pneumatic mandrel rod securing - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety fence Machine needs repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to quotation (excluding installation): - Planetary gearbox: €1,674 - Gearbox flange: €1,850 - Pinion: €850 All prices plus VAT. Without installation. Cheap sale in current condition – sale as is. Immediately available including loading – free loading onto truck.

Sąlyga: naudotas, Gamybos metai: 2017, Vamzdžio skersmuo (maks.): 80 mm, mandrilo ilgis: 4 500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW Ffsdjttah Rspfx Ab Sot → Maximum tube loading length 4.5 m Robust and durable steel construction with a rigid, torsion-resistant connection – no twist-prone components such as a split construction between bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The touchscreen control panel allows for easy and intuitive programming and operation of the machine. After loading, the tube is clamped in the travelling chuck, ensuring precise tube positioning for dimensionally accurate geometries. Standard equipment also includes a check of tube geometry prior to bending: if the bending process is initiated from the wrong position, the machine will not start, preventing operator errors. Optional additional features provide more comfort, increase output, and enhance overall system efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is possible via USB stick or by FTP access from the computer to the machine control. USB or LAN ports (RJ45) are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard Equipment: → Electromechanical drive for the bending axis 4 kW → Bending speed 2.9 rpm (=17°/sec) → Bending direction: left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending spindle diameter 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation measurement ±0.1° → Manual stop system (mechanical stops for length) → Manual indexing system (15° increments for rotation) → Three-jaw chuck for tube clamping on the carriage → External operator panel PLC Control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transfer via (W)LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. Once length and angle are entered, the system calculates the feed values and bending angles automatically. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-retract mandrel Options (can be ordered as extras): → Variable bending speed via frequency inverter or servomotors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on wheels) → Radius extension Images show a new machine.

Sąlyga: naujas, Features: Bending radii: R10 to R200 (min. R = 1.8xD) (depends on wall thickness, material, and tube diameter) Max. bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30, each with up to 9 bends Control: NC1 Bending direction: counterclockwise Usable length (available in various lengths as required): 1.5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3 m mandrel) NOTE: Stated price applies to 1.5 m length. Other lengths available upon request! Early mandrel withdrawal Ffjdpfx Abjuudrkj Sot Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum: 60 x 4 mm Steel tube: 60 x 3 mm Stainless steel: 60 x 2 mm Scope of delivery: Machine Standard accessories (including foot switch, operating manual, 2 hex keys, 4 sets of clamping jaws, bending grease, 25 mm mandrel rod) Supplied without hydraulic oil

Sąlyga: naudotas, Gamybos metai: 1990, Technical details: Tube diameter: 42 mm Wall thickness: 25 mm Round steel: max. Ø 20 mm Square material: tube 25 x 25 mm Maximum bending radius: inner max. Ø 20 mm and outer max. Ø 170 mm Bending speed: not specified °/s Tube feeding length: 3000 mm Fedpfx Aeu Ibvueb Soft Control system: RC 7000 software Machine weight approx.: 2.8 t Dimensions of control cabinet: 800 x 700 x 2000 mm Approximate machine dimensions (LxWxH): 5.1 x 0.7 x 2.0 m Application: Processing of formable pipes, rectangular tubes and round rods, as well as square tubes RC7000 software designation, manual programming Rectangular tube 42 x 20 x 2.5 mm Bending direction: leftward Operation via control panel Accessories: -various bending tools for pipe Ø 25 mm -12 various collets -various auxiliary and clamping devices

Sąlyga: naudotas, Gamybos metai: 1988, Condition: used Year of manufacture: 1988 Stock number: 090151 Delivery time: prompt, subject to prior sale Country of origin: Italy Price: €12,800 In stock: 1 Max. diameter (steel tube): 42 mm Length: 4665 mm Width: 800 mm Fsdpexx A Ekofx Ab Soft Height: 1160 mm Weight: 1,470 kg Steel tube: 42 x 2.5 mm Square profile tube: 40 x 1.2 mm Rectangular profile tube (horizontal): 30 x 40 x 1.7 mm Rectangular profile tube (vertical): 40 x 30 x 1.3 mm Max. bending radius: 255 mm Min. bending radius: 22 mm Max. bending angle: 180° Speed: 90°/s Motor: 5.5 kW Hydraulic tank capacity: 120 l Performance data based on 400 N/mm² Largest bending radius with tube guide rollers: 255 mm Largest bending radius with tube guide slide: 175 mm Smallest bending angle: 4° Max. usable length without positioning device: 3,900 mm Max. usable length with positioning device: 3,370 mm Mandrel retraction stroke adjustable from 8 mm Opening/closing stroke of counter-pressure jaws: 0–45 mm Opening/closing stroke of rollers or slides: 12–22–42 mm Operating manual in German Machine does not comply with AMVO or UVV Without tooling

Sąlyga: geras (naudotas), Gamybos metai: 1996, Tube diameter: 6 - 28 mm Wall thickness: 2 mm Min. bending radius: 2 x D Control system: IPU 20 Max. bending radius: 5.0 x D mm Max. bending angle: 190° Mandrel length: 3000 mm Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space requirement: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and a display unit in the control panel for angle presetting, angle detection, and angle measurement via absolute value rotary encoder, automatic tool plate reset, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: Hydraulics on/off, mode selection, clamp open/close, feed forward/backward, mandrel forward/backward, bend forward/backward, lock forward/backward, mandrel lubrication, rotation device forward/backward, tool plate reset, length stop forward, emergency stop. Ffodevtgn Njpfx Ab Sot The machine comes from prototype construction and has seen very little use until 2000. After that, the machines from this department were sold. The buyer, however, did not use the tube bending machine, which has since only been stored and not operated (original paintwork). Machine offered at a special low price! This is a used machine; therefore, we sell under exclusion of any warranty. Stockholding dealer with 1,600 m² showroom.

Sąlyga: naujas, Gamybos metai: 2025, Vamzdžių lenkimo staklės Zopf Modelis KB 100: Didžiausias vamzdžio skersmuo: 100x5 mm St. 37 Kvadratiniai profiliai: 80x80x3 mm Vientisos medžiagos: 45 mm Ffodpfxjx I Afxo Ab Sot Didžiausias įrankio skersmuo: 900 mm Lankstymo kampas iki 210° Lankstymo greitis: 0–2,2 aps./min. Variklis: 11 kW, 400 V, 50 Hz, 3 fazės Svoris: 1850 kg Matmenys: 140x80x160 cm – Skaitmeninis ekranas – Lankstymo kampo programavimas – Su kojiniu pedalu – Su inverteriu – Galingas variklis ir reduktorius dideliam sukimo momentui – Valdymas lankstymo kampo nustatymui – Skaitliukas atraminės pusės sureguliavimui – Mobilus valdymo pultas – Greita įrankių keitimo sistema – Visos ašys grūdintos ir šlifuotos – Medžiagos spaudimas rankinis – Darbinis stalviršis CK 45

Sąlyga: naudotas, Gamybos metai: 1993, Technical details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control for programming: Gelma MM-1 Tube loading length: 1,800 mm Machine weight approx.: 0.232 t Machine dimensions approx. LxWxH: 1.9 x 0.7 x 1.3 m Semi-automatic tube bending machine Modes of operation: manual as well as semi-automatic Application: For multiple, repeatable tube bending processes (e.g., hydraulic piping) The swiveling unit features preselection for three different bending angles in both single and automatic modes. Currently installed on the machine is a stop rod for tube size Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Equipment/accessories: Ffjdsu Ibyyopfx Ab Sst 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm *

Sąlyga: naudotas, Gamybos metai: 1997, Technical details: Tube diameter: 4.75 - 8.0 mm Wall thickness: - mm Ffodpfxou Ibuko Ab Sst Minimum bending radius: various mm Maximum bending angle: 180° Compressed air: min. 4.5 bar Total power requirement: approx. 10 kW Machine weight approx.: 6.0 t Machine dimensions approx. (LxWxH): 6.3x3.7x2.0 m Control cabinet dimensions: 1.8x0.5x2.7 m Operator console dimensions (LxWxH): 0.85x0.68x1.65 m Fully automatic, numerically controlled system For bending hydraulic lines and automotive brake lines of various lengths. - Variable number of bends possible (max. 100 bends per tube) - 2 different, independent bending modules. Each module features 2 NC axes with functions: "Longitudinal movement" (axis 1 + axis 3) traversing speed max. 2.0 m/sec. and "Bending head rotation" and "Bending" (axis 2 + axis 4) max. bending angle 180° - Program memory for 250 lines - The loading unit consists of a manually refillable drum magazine (capacity in drum magazine tube Ø=4.75mm to Ø=8.0mm for 500/1000 pieces) - Loading via swing-arm inserter - Operator terminal Bundy GHF 60134 Accessories: - Various individual and add-on components - incl.

Sąlyga: naudotas, Gamybos metai: 2004, Techninės detalės: Vamzdžio skersmuo: 20 mm Didžiausias lenkimo spindulys: 100 mm Valdymas pagal programą: S7-300 Vamzdžio padavimo ilgis: 2270 mm Reikalingas oro slėgis: 7 bar Bendra galingumo paklausa: 15 kW Lenkimo greitis: 540 °/sek. Valdymo įtampa: 24 V / DC Maitinimo įtampa: 400 V / 50 Hz / 3 fazės Ffedpfxsu Ibzko Ab Set Matmenys (I x P x A): Lenkimo agregatas: 1,8 x 1,4 x 1,6 m Matmenys (I x P x A): Padavimas: 1,2 x 1,5 x 1,55 m Mašinos matmenys apie I x P x A: 3,0 x 1,0 x 1,2 m Dorninė vamzdžių lenkimo staklė Lenkimo kryptis: DEŠINĖN Valdymas per SIMANTIC Panel PC Pneumatika: slėgis 7 barų; srautas 200 l/min. Hidraulika: slėgis 150 barų; srautas 6,8 l/min. Įranga/priedai: - Alyvos surinkimo lovys 3,1 x 0,96 x 0,02 m - Įvairios atsarginės dalys ir pagalbinės priemonės