Vamzdžių lenkimo staklės

BLM dynamo-ELE- MR200

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 611080402022, Įranga: strypų padavėjas, TECHNICAL DETAILS Axis Speeds Positioning speed X axis: 2,000 mm/s Bending speed Y axis: 400 °/s Rotational speed Z axis: 900 °/s Rotational speed R axis: 110 °/s Positioning speed T axis: 400 mm/s Tolerance X axis: ±0.05 mm T axis: ±0.05 mm Y axis: ±0.05° Z axis: ±0.05° R axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile, stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminium/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average production: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulic System Tank capacity: 80 l Pump capacity: 13 l/min Pressure MR200E: max. 140 bar Psdsyzya Tjpfx Aqxegl Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75 %, 24 h Electrical Data Supply voltage: 400 V ±5 % Supply type: three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM Bar Loader BLM CARM 7 Bar loader weight: 650 kg Conveyor belt Note: Machine is sold without safety guards.

Būklė: naujas, Table width 3000 mm Table length 1500 mm Torch heads 1 Control CNC Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m * Heavy machine bed with precision guides for smooth machine travel Psdpfxopm U U No Aqxogl * Cross carriage with ball bearings, offering height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Installation or relocation of the machine possible via plug & play method using forklift, pallet truck, or crane * 3-sided access to cutting area thanks to cantilever design SATOTEC Extraction Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is equipped with replaceable 3 mm flat-bar slats, mounted at a 45° angle. The spacing between the slats is 50 mm. Power Source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, can be increased with ProPierce Technology * Marking, grooving, and scribing of coated metallic materials * Inverter power source with digitally managed, fully electronic process cycle * Integrated cooling system with semi-automated filling and draining Gas Control: Fully automatic, processor-controlled plasma universal gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction System TEKA EcoCube 5.5 kW Filter medium: dry, fat-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges @ 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (per BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Voltage type: 3Ph+N+PE Fan installation: on the unit, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Intake nozzle: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with cable gland - Compressed air connection with hose nozzle d=8mm - System equipped with grounding bolt - Cables in UL version - EATON frequency inverter installed on the left in attached control cabinet

Gamybos metai: 2006, būklė: labai geros būklės (naudotas), Robot Fanuc R-2000iB/210F (E-25677) Year of manufacture: 2006 Maximum reach: 2655 mm Controller: Fanuc R-J3iC Payload: 210 kg Psdpeizth Hjfx Aqxsgl 5 robots available, each equipped with a different tool on the arm.

Būklė: naujas, Gamybos metai: 2026, -TFON Kantenglättungs- & Oberflächenreinigungssystem -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl -Bearbeitungsstärken: Verarbeitet Materialdicken von 0 bis 120 mm -Kantenglättung: Pgjdpfx Aohq A T Ujqxol Erzeugt eine Radius-2-Kantenverrundung für glatte, sichere Kanten, die sowohl die Optik als auch die Funktionalität des Werkstücks verbessern. -Präzise Steuerung: Ausgestattet mit einem Siemens-Automatisierungssystem für eine genaue und konsistente Steuerung während des gesamten Prozesses. -Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen vielfältige Einsatzmöglichkeiten, sodass verschiedene Arbeitsschritte parallel oder nacheinander ausgeführt werden können. -Tischoptionen: Verfügbare Arbeitstischgrößen: 650 mm, 1000 mm oder 1300 mm – passend für unterschiedliche Produktionsanforderungen. -Tischarten: Flexible Ausführungen – magnetisch, Vakuum oder Magnet-Vakuumtische – sorgen für sicheren Halt verschiedenster Materialien und Bauteilgrößen. -Plasma- und Sauerstofftechnologie: Moderne Plasma- und Sauerstofftechnik entfernt effektiv schwere Grate und Schlacke nach dem Zuschnitt – für saubere, glatte Oberflächen. -Oberflächenreinigung: Entfernt zuverlässig Verunreinigungen wie Rost, Oxide und Zunder – ideale Vorbereitung für weitere Bearbeitungsschritte. -Kantenglättung für Beschichtung: Sorgt für eine perfekte Vorbereitung der Bauteile zum Lackieren oder Beschichten durch eine gleichmäßige, fehlerfreie Oberfläche. -Einsatzgebiete: Optimal für Stahl-Service-Center, Energie-, Bergbau-, Bau- und Automobilbranchen. Bietet maßgeschneiderte Lösungen für schwere Anwendungen. -Uniformes Ergebnis: Sechs Lamellenräder arbeiten synchron und gewährleisten konstante, gleichmäßige Kantenradien an jedem Bauteil. -Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schleifbänder durch reduzierte Abnutzung und dauerhaft gleichbleibende Leistung.

Būklė: naudotas, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1,845 mm Table Length / Clamping Length: 5,505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot pitch: 263 mm Overall Length: 6,230 mm Total Plate Height: 350 mm Weight: 11 t Pgsdpfx Aqjbn Amfsxel

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 051888, Used automatic circular saw Brand: Pedrazzoli Model: SB 350/45 AP Serial number: 051888 Year: 2004 Headstock block rotation mechanism for angled cuts up to 45° to the left, with locking lever. Removable pneumatic anti-burr vice. Pneumatic cylinder for vice movement, with adjustable speed brake. Transmission with dual variable-pitch pulley for adjustable speed from 15 to 90 m/s. Swinging head mounted on adjustable self-lubricating bushes. 600 mm stroke feeder operated by pneumatic cylinder. Repeatable up to a maximum of 9 strokes for a total feeding length of 5400 mm. Maximum feeder jaw opening: 160 mm. Programmable piece counter. Minimum end trim offcut: 160 mm. Feeder speed control valve. Ammeter. Reverse mode. Emergency stop button and control panel lockable master switch. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for easy cleaning. Full safety guard designed for quick blade change. Blade diameter: Ø 350 mm. Cutting capacity: Round tubes Pgedpfx Aorfw Ikeqxsl 0°: 102 mm 45° right: 102 mm Square tubes 0°: 85 mm 45° right: 90 mm Rectangular tubes 0°: 158 x 85 mm 45° right: 120 x 85 mm Specifications: Three phase, 380V Dimensions: 1300 x 1350 x 1600 mm Work height: 950 mm Weight: 420 kg

Būklė: naujas, Gamybos metai: 2022, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 20 m/min, padavimo greitis Z ašis: 15 m/min, bendras svoris: 7 400 kg, veleno greitis (min.): 4 000 aps./min, veleno greitis (maks.): 10 aps./min, Y ašies eiga: 1 500 mm, galia: 22 kW (29,91 AG), DYAS Plattenbohrzentrum - DYAS PDC-1500 Pgodogbfaxopfx Aqxjl Anzahl Bohraggregate: 1 vertikal Motorleistung: 22 kW Spindeldrehmoment: 280 Nm Spindeldrehzahl: 10–4.000 U/min Automatischer Werkzeugwechsler (ATC): 16 Plätze Maximales Werkstückgewicht: 760 kg Maximale Bohrleistung: Ø40 mm

Būklė: naujas, Gamybos metai: 2024, Fiber Laser Cutting System FLV-3015-OT-6022 3kW / VF1530-3000W Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Maximum speed: 60,000 mm/min - Maximum acceleration: 0.7 G - Maximum load capacity: 1,200 kg - Power: 3.0 kW - Source brand: Choice between Raycus or MAX Photonics - Electrical connection: ~3x400 V 50 Hz - Protection class: IP54 Cutting Thickness - Carbon steel: recommended thickness 20.0 mm, max. thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, max. thickness 10.0 mm - Aluminium: recommended thickness 6.0 mm, max. thickness 8.0 mm - Brass: recommended thickness 5.0 mm, max. thickness 6.0 mm Construction Thanks to its welded frame, the machine is highly stable. Japanese Fuji servo drives ensure high speed with excellent precision. Tube Laser The machine is equipped with a tube laser. - Maximum workpiece length: 6,000 mm - Chuck clamping diameter: 220 mm Automatic lubrication system for axis guides. Pgsdsh Hfldjpfx Aqxel Ease of Operation Loading heavy sheets is facilitated by built-in transport balls, ensuring smooth sliding during loading. Collecting small finished parts is also easier thanks to drawers beneath the machine, which can be conveniently pulled out with a practical handle. RayTools cutting head with autofocus. Option – Otinus Protect This product offers individual protection for your laser source. With this service, you ensure your business continuity remains protected. We keep your operations running so you can deliver your orders on time. Option – Voltage Stabilizer Control Panel The computer runs Windows and CypCut software, which includes functions such as design, file import/export, and job optimization, among others. Installed programs have lifetime licenses. The machine features a wireless controller. Professional Support We maintain continuous contact with our customers. To meet your needs, we include an Otinus Specialist Assist hour package with every purchased machine. Otinus Academy Learning Software When you purchase this device, you get one-year access to online courses that enable you to train new staff members or refresh training knowledge! Package with Ready-to-Use Drawings Every Otinus laser cutting system comes with a package of usable CAD drawings. Included in the machine delivery: - Three-day training and machine installation - Day 1 and 2: up to 8 hours each – commissioning and training on the control system - Day 3: up to 8 hours – independent operation on the machine under supervision of our technician, including the option to program specific details. - Consultation with our specialists - By phone: 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months - Online: 7:30 to 14:30 (Mon-Fri) – an 8-hour package to be used within 12 months - Access to Otinus Academy online courses - LibreCad – access valid for 12 months - Additionally provided: - CAD drawing package

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, paskutinio kapitalinio remonto metai: 2025, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages Pgsdpfx Aqsvf E Avjxel - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Gamybos metai: 2009, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 120P1109, OFFER 21407 Pedpfx Aqohcnhmexjgl Motorized tank rotating device with rail-mounted undercarriage Technical data: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per tank turning unit: 20,000 kg - Workpiece diameter approx.: 500 - 3,500 mm - Center distance of support rollers adjustable via trapezoidal spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-sided drive - Infinitely variable rotation speed control - Handheld remote control for forward and reverse - Drive: 400 V - Both units are mounted on rail undercarriages - Space requirement powered unit approx.: W 3,800 x H 1,150 x D 1,350 mm - Space requirement idler unit approx.: W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit approx.: 2,500 kg - Weight idler unit approx.: 1,800 kg