Ritininiai transporteriai

Ruchser RUR

Būklė: labai geros būklės (naudotas), Four-sided planer SCM Compact XL Duodpfx Aslat Hdoc Iou - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindles each driven by a 7.5 kW motor, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Dedpfju R Szaox Ac Ieuu Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Būklė: naujas, Glazing Bead Nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner joints are closed - No open glazing bead gaps - No color discrepancies during paint finishing - Glazing bead frames are easy to assign 2P Jumbo Automatic E.C. Staple Corner Joining Machine for stapling glazing bead frames. Option to select between automatic and manual operation; With angle stop, clamping device from above and in front. Pressure can be regulated separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table. Operation via foot pedal. ----- Price for this configuration upon request! Plus statutory VAT and packaging/shipping ----- Pictures show the 2P Staple Corner Joining Machine with the optional mobile work table (see details under surcharge options). Surcharges: ----- Mobile work table Height-adjustable from 700 to 1,000 mm, 2 plug-in support rails, 1,000 mm long, 2 swiveling and sliding support rails, 1,000 mm, all rails covered with felt, 4 swivel castors, 2 of which with brake. ----- Surcharge: €1,311.00 net Staples: packages 15 mm staples (pack of 2,000 pcs): Price €22.00 12 mm staples (pack of 3,000 pcs): Price €32.00 10 mm staples (pack of 3,000 pcs): Price €32.00 Djdsvnh T Nspfx Ac Iouu Dimensions and weights ----- Jumbo Automatic E.C.: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping. (Technical data as per manufacturer's information - subject to change!)

Būklė: naujas, Gamybos metai: 2026, Construction size: 5 Nominal heat output: 145 kW -- Compliant with BImSchV Stage 2 and CE certification -- Combustion chamber fully lined with fireclay For spaces up to: 3,800 m³ (according to DIN standard) Dusdpfx Acedlhcre Iju Fuel types: Firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 35 - 40 kg/h Blower air output (free-blowing): 9,400 m³/h Outlet opening: Ø 700 mm Flue pipe connection: Ø 220 mm Weight: 1,950 kg PLC control cabinet: 380 Volt

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), I am selling the following window manufacturing set: - 1 unit Mortise and Tenon Machine Weinig Unitec 10. - 1 unit Profile Shaping Center Weinig Univar 10. Year of manufacture: 1998. Milling heads from OERTLI. Available immediately. Price for the complete set: €17,000. Condition: very good! Dodpfx Acefzzhye Ieuu

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weinig Powermat 500 Four-Sided Planer Working width: 230 mm Working height: 160 mm Number of spindles: 6 Spindle configuration: - Bottom: 5.5 kW, 8000 rpm - Right: 5.5 kW, 8000 rpm - Left: 7.5 kW, 8000 rpm - Top: 7.5 kW, 8000 rpm Dodpsvfr Rgefx Ac Iouu - Bottom: 7.5 kW, 8000 rpm - Universal: 5.5 kW, 8000 rpm Spindle No. 6 equipped with PowerLock system Feed speed adjustable by inverter up to 30 m/min Feed rollers embedded in the working table (1 grooved roller for wet timber) Electromechanical adjustment of working height and width Pneumatic material hold-downs Drive via cardan shafts Total power: 41 kW Year of manufacture: 2005 CE certificate

Būklė: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam Duedped Rg Dpofx Ac Iou No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW

Gamybos metai: 1995, būklė: labai geros būklės (naudotas),

Būklė: naudotas, mašinos/transporto priemonės numeris: 008116, Maks. apdirbimo aukštis: 120 mm Maks. padavimo greitis: 25 m/min Dedow Iddzjpfx Ac Ijuu Darbo velenų skaičius: 6

Būklė: geras (naudotas), Código: 0253 Marca: LARI E LARI - ITALIA Modelo: FR 20 - TA - Norma CE Centro de trabajo para fresado y taladrado en madera, plástico o materiales compuestos, puertas de madera, marcos de ventanas - Norma CE Datos técnicos: Recorrido del eje X: 3250 mm Recorrido del eje Y con herramienta a 90°: 130 mm Recorrido del eje Z con herramienta a 0°: 290 mm Recorrido del eje Z con herramienta a 90°: 175 mm Velocidad de trabajo del eje X: 40 m/min Velocidad de trabajo del eje Y: 30 m/min Velocidad de trabajo del eje Z: 30 m/min Unidad de taladrado y colocación de bisagras: Machos/Hembras Control de velocidad por inversor Sonda Portaherramientas tipo ER 25 Potencia del husillo eléctrico para taladrado de cabeza anuba: 2,2 kW Inclinación de la cabeza anuba: -10° a +90° Dodpfx Aox A Hdxoc Isuu Husillo eléctrico para fresado: 2,7 Hp a 18.000 rpm Portapinzas ER 32 Velocidad variable mediante inversor Inclinación de 0° a 90° para trabajos tanto verticales como horizontales Ordenador de máquina: control numérico - sistema operativo Windows XP - monitor en color - teclado alfanumérico - puerto USB - interpolación Mesa de trabajo con 3 mordazas deslizantes para fijación de piezas Potencia total instalada: 12 kW Diámetro de boca de aspiración: 120 mm Aire comprimido: 7-8 bar Dimensiones generales para el transporte: 4100 x 1500 x 2100 mm (alto) Peso de la máquina: 1.400 kg Peso del cuadro eléctrico: 250 kg