Vežimėlis varčioms ir rėmui vežti

COMALL CARR 900-93/15 Q

Būklė: naujas, Gamybos metai: 2024, Genie Z34/22 IC diesel articulated telescopic boom lift, new, used, and demo machines available Ncedsrnqq Hepfx Acpjr

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Ncsdpfxsqt Dmyj Acpsr Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naujas, The ALTENDORF F 25 offers everything a panel saw needs in a compact footprint. Whether it's for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be efficiently processed with maximum precision, straightforward handling, and outstanding cut quality. The saw unit, which can tilt to one side, also enables angle cuts. The smooth-running double roller carriage based on the Altendorf system, as well as digital height and tilting display, are standard features. A machine equally suited for both beginners and professionals. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Ncjdsu R S Hcopfx Acpsr Preparation for subsequent installation of a scoring unit ----- Technical Specifications ----- Tilting range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Max. blade projection: 104 mm Non-CE version: Max. saw blade Ø: 350 mm, Max. blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speeds: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood available as an option - - New display machine -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump delivery rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating capacity: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg Ncodpfsu Egp Iox Acpor

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system - Conversion to Siemens HMI operator panel - New electrical components Ncedpfouiy Nyex Acpsr - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel

Būklė: naudotas, Formatinė diskinė pjūklas Martin T 60 vokiškos kokybės produktas sunki precizinė formuojanti diskinė pjūklas Ašių pozicionavimo valdymas su 5,7 colių jutikliniu ekranu Pasukama valdymo pultas virš stalo Pjūklo diskas pasukamas 0 - 46° kampu Pjūklo disko pasukimas ir aukščio reguliavimas motorizuoti Automatinis priekinis įrenginys Variklis 5,5 kW Pjūklo disko skersmuo iki 400 mm Kraštų stalo ilgis 3000 mm Pjovimo plotis su lygiagrečiu atitvaru 1250 mm Paralelograminis skersinis stalas, abiejų pusių pasvirimas iki 46°, LCD ekranai, 0,01° kampo reguliavimo tikslumas Nedpeyuvqgofx Acpocr Plotis atitvaro reguliavimas iš priekio su rankenėle, naudojant precizinius bėgelius Plotis atitvaro rodymas per jutiklinį ekraną CE versija Mašina PATIKRINTA DIRBTUVĖSE, PUIKI BŪKLĖ Pristatymas iš sandėlio Lieboch

Būklė: geras (naudotas), Gamybos metai: 1992, Single Piece Wood Sander Sanding top & bottom Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start-up Pneumatic belt tensioning Main switch Sanding belt oscillation Top and bottom finishing brush unit, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed & outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Technical details and prior sale subject to change. • Stated prices are ex works (location) - loaded free of charge! • Machines have been cleaned and function-tested. • All machines are sold as seen without any warranty. Buyers are welcome to inspect the machines at the location. Ncsdpfx Acjwyda Uoper • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Būklė: naudotas, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Grooving Machine FZS-2 Electronic, with stepless grooving spindles and automatic roller table ----- Crosscut Saw ----- Spindle arrangement: top Three-phase motor 3 kW Spindle diameter: 30 mm Speed: 2800 RPM Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm diameter extraction port 2 grooving spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4200 RPM Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both grooving spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm diameter extraction port * Automatic brake with speed monitoring Swivel Table ----- * Swivel range: +/- 65° * Automatically changing counter block (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter block in the cutting plane at every angle setting Special Equipment ----- Steplessly adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction port diameters: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show the same model. Original images not yet available. Nsdpowgwlkofx Acpjcr (Technical data as per manufacturer's information - no guarantee!) All prices are net, plus statutory VAT.

Būklė: naujas, Gamybos metai: 2026, Drilling and Milling Automation Unit Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling automation unit with mobile machining head – the table remains stationary, the drilling head moves. The system can be operated both manually and fully automatically. After each drilling operation, the machining head automatically moves in the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine controller can be carried out using DXF/DWG file formats via a programming station. Alternatively, programming can also be done directly at the machine controller. The system is highly robust and assembled from proven machine components. Technical Specifications: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base • Spindle speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes via servo motors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top to bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St-50 (depending on tool) • Thread tapping: M4 - M30 (with floating chuck) • Y-axis travel: 300 mm • Tolerance in X-axis: ±0.1 mm • Tolerance in Y-axis: 0.06 mm • Tolerance in Z-axis: 0.06 mm • Spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety with light barrier • Rear access protection with safety fence • Control: 21.5" touch-screen panel, reinforced front glass • Simple on-machine programming • Milling of elongated holes and circles • Lubrication via minimum quantity spray system • Without material clamping devices • Remote maintenance via TeamViewer possible (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Workflow simulation • Digital handwheel Nsdpfx Ajfu Ivzocpscr Your Benefits: • Workpiece surfaces remain protected • Clear, graphical user interface • Machining at the end of the workpiece is easy • 50% space saving compared to moving-table operations • Chips are collected in chip tray • Easiest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated via CAD/CAM You are welcome to visit our manufacturing/demo hall to inspect the desired system at any time. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naudotas, Gamybos metai: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CETRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right saw unit is fixed; the left unit can be adjusted. The preset cutting length can be read on a digital measuring display. Both units feature supports that enable the simultaneous cutting of 2 glazing beads. To cut larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate the loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measuring display • Pressure switch • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool kit • Safety guards with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit stroke • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Space requirement (standard equipment): 3000 x 850 mm EXTENDED CUTTING CAPACITY 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for adjusting up to 4 intermediate angles Additional central support 1 pc Adaptations for rebated profiles 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for the profile inclination - Spacers on the rear stops of the units and the central support Nsdoxnlgcjpfx Acpjcr In the sketch below (in green), a beveled pusher is shown, which follows the inclined profile and presses it against the (red) spacer on the stop. Location: Garbsen