Spintelė Cts pirkti naudotą (7 045)

Sąlyga: labai geros būklės (naudotas), Here we offer you a temperature test chamber. Water-cooled Technical specifications: Temperature operating range Temperature range in °C: -70 / +180°C Nwjdpfx Agen Sl T Sjhep Rate of change according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test chamber volume: 350 liters Test chamber dimensions: height approx. 750 mm, width approx. 650 mm, depth approx. 720 mm External dimensions: height approx. 1800 mm, width approx. 850 mm, depth approx. 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your security as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors!) If you have further questions, we would be pleased to answer them by telephone.

Sąlyga: labai geros būklės (naudotas), CTS Type: T-40/2000 Air-cooled Temperature Test Chamber Technical Specifications: Cooling Unit: Air-cooled, low-noise, fully hermetic with stepless capacity adjustment via electronic monitoring and control system. Uses environmentally friendly refrigerant R404A. Door: Fully opening door, left-hand hinge, one-handed operation, lockable. Rack: Stainless steel, support surface 970 x 980 + 500 mm. Maximum load per rack: 35 kg. Maximum total load with full racking: 100 kg. Test Chamber Illumination: 3x halogen lamps, 20 W, 12 V. Control: 32-bit controller. LCD control panel. Digital display of set and actual values. Numeric input of set values. Plain text error messages. RS 232 interface. Free switching channels for customer-side specimen control. Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Pipe lead-through NW 50 Control Panel Window: 570 x 710 mm Electrical connection, cable length: 5m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 1.5 K/min Heat Emission: Approx. 2500 W at +20°C Approx. 2100 W at 0°C Approx. 1500 W at -20°C Technical data refer to ambient temperature of +25°C, rated voltage 400 V, without test specimen, without heat radiation, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions (internal): Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operational Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain: non-pressurized, R 1/2" internal thread Sound pressure level (measured per DIN EN ISO 3744, 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important information for your safety as the buyer! The following points are carried out on all chambers we offer, prior to sale: 1. Functional check and replacement of necessary components 2. If required, new fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and information!) Nwodpfx Agoup T Uqohsp We are happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the load-bearing capacity of the base Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Nwedpfx Agjwfdniohop Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg Important safety information for buyers! The following steps are carried out in advance for the chambers we offer: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data; all information without guarantee!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), CTS Temperature Test Chamber We are offering you a CTS temperature test chamber. Water-cooled Model series: T-40/600 Includes metal struts for increased floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Nsdpfxshxyg Ho Aghowp Type: T-40/600 /011232 Important information for your safety as the buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and details subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CTS Climate Test Chamber C-55/1000 Li Water-Cooled Temperature range: -50°C to +100°C Humidity range: 5% to 95% rH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 CTS series designation breakdown (example: Type C -55/1000/Li): 1) C: Climate 2) -55: lower temperature -55°C 3) 1000: 1000 liters test chamber volume 4) Li: special equipment for tests with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for external test object control Test chamber lighting: Energy-efficient, high-luminance LED strip mounted on the door Shelf: Stainless steel, support surface 970 x 980 mm Maximum load per shelf: 35 kg Total load at max shelf configuration: 100 kg Feed-throughs: 1a: NW50 1b: 2x NW125 1c: 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range: -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C Climate tests: Temperature range: +5°C to +95°C Humidity range: 5% to 95% RH Dew point range: +5°C to 78°C Temperature deviation ≤ ±1.0 K over time Humidity deviation ≤ ±3.0% rH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options can affect the performance data. Dimensions: Test chamber volume: 1000 liters Test chamber internal dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level: < 58 dB(A) (measured in accordance with DIN EN ISO 3744, at 1 m distance, front side) Weight: approx. 1000 kg Nedjva Hi Hjpfx Aghewp Heat emission to placement area: 10.4 kW Cooling unit: Water-cooled, low noise, fully hermetic Stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for buyers regarding safety: The following steps are performed in advance for our offered chambers: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications, technical data, and information are subject to change and error!) Further questions gladly answered for you by phone.

Sąlyga: labai geros būklės (naudotas), CTS Model: C-40/350 Ex/l Water-cooled Climate Test Chamber ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for use in environments where explosive atmospheres may occur. Such devices are specifically engineered and tested to ensure safety in these environments. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate (according to IEC 60068-3-5): Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0% r.h. over time The technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Refrigeration unit: water-cooled, low noise, fully hermetic, infinitely variable capacity control via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: floor load 150 kg/m² Nwedpfxowvr H Uj Aghop Insert grid: stainless steel, support surface 620 x 600 mm Max. load per grid: 35 kg Total load with maximum racks: 100 kg Control system: 32-bit controller LCD operating panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for customer-side test object control Dimensions: Test volume: 350 litres Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP 54 Sound pressure level:

Sąlyga: naudotas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-cooled (converted to refrigerant R-452a) Temperature range: -70°C to +180°C Humidity range: 10–98% r.H. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for the buyer! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with compliant refrigerant in accordance with legal standards 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Njdpfx Agsxb Dm Ishswp Scope of delivery: (see picture) (Subject to changes and errors in technical specifications and data!) If you have any further questions, we would be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), CTS Test Cabinet / Climate Chamber We are offering a CTS climate chamber for sale. Air-cooled Test chamber volume: 200 liters Internal chamber dimensions: height 750 mm, width 650 mm, depth 400 mm External dimensions: height 1800 mm, width 920 mm, depth 1345 mm Temperature operating range Temperature range: -40°C to +180°C Cooling rate: 4 K/min Heating rate: 4 K/min Maximum heat input at +20°C: 3500 W Temperature stability (temporal): ≤± 0.3 K Climate operating range Temperature range: +10°C to +95°C Humidity range: +10% to +98% RH Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current: 9.4 A Rated power: 4.8 kW Weight: approx. 450 kg Refrigerant: R404A Model: CTS C-40/200 Nedpfx Aohwhzweghjwp The following points are performed on the chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Technical data and information may be subject to change and error!) If you have further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CTS Temperature Test Chamber T-55/1000 Li Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS chamber series is composed as follows: For example, Type T -55/1000/Li 1) T stands for: Temperature 2) -55 stands for: lower temperature limit -55 °C 3) 1000 stands for: 1000 liters test chamber volume 4) Li stands for: Special equipment for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text Ethernet interface RS 232 interface Njdpfxjvba Rao Aghswp Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-luminance LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4'' for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect the performance data. Dimensions: Test chamber volume 1000 liters Internal dimensions Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operational data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Continuous performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by telephone.

Sąlyga: geras (naudotas), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS cabinet series is structured as follows: Example: Type TSR-30/1000 1) T stands for: Temperature Nedpfxerivfco Aghjwp 2) S stands for: Stress-Screening 3) R stands for: External Conditioning 4) -30 stands for: minimum temperature -30°C 5) 1000 stands for: 1000 liters of test chamber volume Technical Specifications: A) TSR-30/1000 Base Unit without hose connections, i.e., when used as a standalone temperature test chamber Temperature Tests: - Temperature range: -40°C to +180°C - Ultimate temperature: -45°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: * Heating: 6.0 K/min * Cooling: 5.0 K/min - Heat radiation: * Approx. 5000 W at +20°C * Approx. 4200 W at ±0°C * Approx. 3000 W at -20°C The technical data are based on an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without radiation, and without additional equipment. Air Flow Volume: approx. 2000 m³/h B) TSR-30/1000 Base Unit with hose connections, for connection to an external customer-supplied test chamber Temperature Tests: - Temperature range: -30°C to +170°C - Temperature deviation: ≤ ±0.1 to 0.5 K over time - Average temperature change rate, measured in closed-loop: * Heating: 4.0 K/min * Cooling: 4.0 K/min (in the range of +150°C to -10°C) The technical data are based on an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without radiation, and without additional equipment, measured in closed-loop mode. Note: The external, customer-supplied test chamber must be absolutely airtight and properly insulated. Any feedthroughs must be optimally sealed by the customer. Dimensions: - Test volume: 1000 liters - Air recirculation connection Ø 200 mm - Chamber internal dimensions: Height 900 mm x Width 1000 mm x Depth 1100 mm - External dimensions: Height 1950 mm x Width 1270 mm x Depth 2245 mm Technical Design: Refrigeration Unit: - Water-cooled, low-noise, fully hermetic - Stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R404A Door: - Fully openable door, left-hinged - One-hand operation, lockable Insert Rack: - Stainless steel, shelf area 970 x 980 mm - Maximum load per rack: 35 kg - Total load with maximum rack configuration: 100 kg Chamber Lighting: Halogen lamp 20 W, 12 V Control System: - 32-bit controller - LCD control panel Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, 50 Hz - Rated power: 13.3 kW - Protection class: IP 22 - Sound pressure level: < 60 dB(A) - Weight: approx. 850 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and technical data errors! Information is provided without guarantee.) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), CTS Climate Chamber / Climatic Test Cell Here we offer a CTS climate chamber / climatic test cell. Available from mid-January 2023! Water-cooled Height adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 mm Test space approx. (W x D x H): 2500 x 2720 x 2200 mm Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation: 1 K over time Average temperature change rate without radiant heat, measured at supply air: Nsdeip Dp Sjpfx Aghjwp Heating: 2 K/min Cooling: 1 K/min from +110°C to -35°C Climatic tests: Temperature range: +10°C to +90°C Humidity range: +30% to +95% RH Dew point range: +5°C to 89°C Temperature deviation: 0.5 K over time Humidity deviation: ±1–±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 kW Rated current: 92.3 A Compressor: S6J-16.2 + Chiller unit Refrigerant: R404A Weight: 5500 kg Type: CW-40/16 Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) For further questions, please contact us by phone.

Sąlyga: labai geros būklės (naudotas), We are offering a climate test chamber for sale. Water-cooled Test chamber volume: 350 liters Interior dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climatic operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.H. Dew point range: +5°C to 89.5°C Nwedji Tw Uvepfx Aghop Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% r.H. over time up to 90% r.H.; max. ±1 - 3% r.H. over time above 90% r.H. Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerants: R404A / R23 Weight: 650 kg Model: CS-70/350 Important information for your peace of mind as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), CTS Type: C-40/60 Nedpfx Agou Hlb Ejhowp CTS Compact Climate Chamber, Air-cooled Test volume: 60 litres Temperature range: -40 °C / +180 °C Humidity range: 10% to 98% relative humidity +10 °C to +90 °C within temperature range +5 °C to +89.5 °C within dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Rated voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated current: 13 A For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of target and actual values - Numerical input of target values - Error messages in plain text - RS 232 interface - Free switching channels for external specimen control Technical Specifications Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat emission: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm Njdpfx Asu U Ixmeghswp External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 8.8 kW Nominal current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information reserved!) If you have further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), CTS Type: C-40/350 CTS Temperature Test Chamber, Air-Cooled Test Chamber Volume: 350 liters Test Chamber Dimensions: Height 750 mm x Width 650 mm x Depth 720 mm External Dimensions: Height 1800 mm x Width 850 mm x Depth 1640 mm Design: Floor-standing unit Temperature Working Range: Temperature Range: -40°C to +180°C Nwsdpeg Sr Egsfx Aghep Cooling Rate: 4.0 K/min Heating Rate: 3.0 K/min Electrical Connection: 400V +6-10%, 3/N, 50Hz Connected Load: 5.5 kW Nominal Current: 8.3 A Condenser (Refrigeration Unit): Air-Cooled Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information! The following procedures are carried out on all our offered chambers prior to sale: 1. Functional test and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and data subject to change; errors excepted!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CTS Temperature Test Cabinet We offer you a CTS temperature test cabinet. Water-cooled CTS Temperature Test Cabinet Technical specifications: Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability over time: ≤± 0.3 K Dimensions: Test volume: 600 liters Internal chamber dimensions: height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: height approx. 1900 mm, width approx. 1120 mm, depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Connected load: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Type: T-70/600 Important safety information for buyers! The following procedures are carried out on all chambers we offer before sale: 1. Functional check and replacement of any necessary components 2. New refill with legally compliant refrigerant Nodpfx Agoichkvohswp 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.

Sąlyga: geras (naudotas), CTS Model: T-70/600/S Water-cooled temperature test chamber Refrigerant: Converted to R-452A Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific DUT control Technical Data Temperature testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Nsdpfovitmdox Aghjwp Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, no heat radiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information! The following work is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data, specifications reserved!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CTS Model: TW-60/9 Nsdpfovb E Uqox Aghjwp Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), CTS Model: TW -60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Model TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404 A Control: - 32-bit controller - LCD operating panel - Digital readout of set and actual values - Numerical entry of set values - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Temperature change rate on average with test specimen and heat radiation measured at supply air. - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test specimen: 420 kg solar panel modules with 100% load - Heat radiation: 3000 Watt constant Technical data is based on ambient temperature of +25°C, rated voltage 400 V, without test specimen, without heat radiation, and without additional devices. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Power supply: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated output: 48.9 kW - Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain: unpressurized R1" internal thread - Weight: approx. 5609 kg Nwedpfx Ajvb Hanjghop Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) We will gladly answer any further questions by phone.

Sąlyga: naudotas, CTS Type: TS -70/600-13 Water-cooled climatic test chamber Series: TS -70/600-13 Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Electrical connection: 400 V / 3P / N / PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y / 4PC-10.2Y Refrigerant: R-404A / R-23 Weight: 1350 kg For your safety as a buyer, please note the following information! Nwedevcyawopfx Aghjp The following measures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Nominal Voltage: 400V 3/N PE 50 Hz Nominal Power: 6.7 kW Nominal Current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door Nwedsvaxq Nepfx Aghep - Digital display of setpoint and actual temperature values - Easy adjustment using +/- button - Digital input for temperature in °C - PLC compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-supplied test specimen sensors Shelving: Stainless steel, support surface 820 x 710 mm Maximum load per shelf: 35 kg Total load with maximum shelf configuration: 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic with stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate: measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Maximum heat radiation: 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Nominal power: 6.7 kW Nominal current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg Important security information for buyers! The following points are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) Further questions can be answered by phone.

Sąlyga: labai geros būklės (naudotas), CTS Type: C-40/1000 CTS Climatic Test Chamber Air-cooled condenser refrigeration unit Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of set values Error messages in plain text RS 232 interface Free switching channels for user-side test item control Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating rate: 2.0 K/min Nwjdpfx Ageru Dzuohep Cooling rate: 2.5 K/min Temperature deviation: ± 0.1 to ± 0.3 K over time Heat Radiation: Approx. 2500 W at +20°C Approx. 2500 W at ±0°C Approx. 1500 W at -20°C Climatic Working Range: Temperature range: +10°C to +95°C Humidity range: 10 to 98% rH Dew point range I: +7 to +94°C Dew point range II: -10 to +7°C Temperature deviation: ± 0.1 to ± 0.3 K over time Humidity consistency I, over time: ± 0.5 to ± 1.5% rH Humidity consistency II, over time: ± 1 to ± 3% rH Panoramic window: 570 x 710 mm Test chamber dimensions: width 1000 mm, depth 1100 mm, height 900 mm External dimensions: width 1270 mm, depth 2220 mm, height 1950 mm Test chamber volume: 1000 liters Tube ports, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Nominal current: 12.4 A Refrigerant: R-404A Weight: 800 kg Important safety information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, all information is subject to confirmation!) If you have further questions, we are happy to answer them by phone.

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control System: 32-bit Controller LCD Control Panel Digital display of set and actual values Numerical input of setpoints Plain text fault messages Interface: RS 232 Free switching channels for user-specific test item control Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: - Heating: 2 K/min - Cooling: 1.5 K/min down to -10°C Radiant heat output: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: The test chamber is first purged with a high volume of N2 until the oxygen content is below 3%. It then switches to a base level supply (approx. 10% of the full purge rate). Base level nitrogen flow is measured, displayed by a flowmeter, and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber through a flame arrester, directing it to an O2 sensor which checks the residual oxygen content. The gas is then returned to the chamber through a second flame arrester. The exhaust pump is monitored by a volume flow meter. Further details are available in the Dräger manual in the appendix. The gas system is currently deactivated! Technical data is based on an ambient temperature of +25°C, nominal voltage 400V, without test item, without radiant load, and without additional equipment. Dimensions: Test volume: 950 liters Test chamber dimensions: approx. 700 mm (H) / approx. 900 mm (W) / approx. 1500 mm (D) External dimensions: approx. 2400 mm (H) / approx. 1270 mm (W) / approx. 3125 mm (D) Nwjdpoihb Amefx Aghop Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, 1/2" internal thread Sound pressure level: < 62 dB(A) (measured per DIN EN ISO 3744 at 1m distance from the front) Weight: approx. 1500 kg, control cabinet approx. 300 kg External refrigeration unit Refrigerant: R404A / R23 Important Safety Information for Buyers: The following steps are carried out in advance on chambers we offer: 1. Functional testing and replacement of necessary components 2. Recharging with legally compliant refrigerant if necessary 3. Leak test with certification 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. All information provided without guarantee!) If you have further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), CTS Climate Test Chamber Type: C -40/600 Air-Cooled (converted to R-452A refrigerant) Test chamber volume: 600 liters Temperature testing: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K (over time, in steady-state conditions) - Average temperature change rate (without test specimen and without radiant heat): Heating: 2.5 K/min Cooling: 3.0 K/min - Radiant heat max. 2500 W at +20°C Nwedpfx Agew U Awmshep Climate testing: Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. Humidity consistency II: ±1% r.h. to ±3% r.h. Temperature consistency: ±0.1 K to ±0.3 K Test chamber internal dimensions (approx.): Height 850 mm, Width 850 mm, Depth 830 mm External dimensions (approx.): Height 1900 mm, Width 1115 mm, Depth 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for buyers! For your safety, the following procedures are carried out in advance on our chambers on offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Sąlyga: geras (naudotas), Type: TS -70/1000-10 For sale: CTS Temperature Test Chamber Model: TS -70/1000-10 Cooling: Water-cooled refrigeration unit, Compressor has been replaced! Features: - Multi-touch control panel - USB and Ethernet interfaces - Feed-throughs for test cables (4 × Ø 125 mm) - Safety temperature limiter Areas of application: - Environmental and endurance testing - Thermal cycling (stress screening) - Quality assurance and R&D - Electronics, automotive, materials testing Nwjdexdi Ezopfx Aghep Test chamber volume: 1,000 liters Test chamber dimensions: Height approx. 1,000 mm, Width approx. 860 mm, Depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, Width approx. 1,270 mm, Depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ±0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note the following! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and data may be subject to change and errors!) If you have further questions, we are happy to answer them by phone.