Spintelė Cts pirkti naudotą (502)

Sąlyga: naujas, Gamybos metai: 2025, Pjovimo peiliai Modelis: WEIMA, GROSS, UNTHA Tipas: ZM40, ZMK50, GZ40, RS40, RS50 Gamybos metai: 2025 Nauji / paruošti naudoti iš karto 1. 1Z-115 peilis 2. 2Z-115 peilis Kledpfx Aexn H Sasf Iol 3. 3Z-115 peilis Esame smulkintuvų ir trupintuvų atsarginių peilių ir dalių gamintojai.

Sąlyga: naudotas, Freshline šaldiklis MP Tipas IQF 1220.15/3070 tinka naudoti su azotu visiškai nerūdijančio plieno maksimali produkto aukštis: ± 100 mm Ksdpfx Afsx Tfmie Iell talpa: ± 5 000 kg/val. produkto apkrova (kg/m): ± 13-14 kg/m 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatika: 1 Nm3/h, 5-7 bar(g) LIN skystas azotas 3 bar(g) grynoji juostos plotis: ± 1 220 mm grynoji juostos ilgis: ± 16 800 mm matmenys (I x P x A): ± 17 700 x 2 600 x 2 600 mm (maks. atidarytas) labai geros būklės

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. Kljdpfx Asvz Hq Tjf Iel A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 Klodovz Hq Hopfx Af Iol The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. Klodevz Hqyepfx Af Iol - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm Klodpfx Afovz Hqtj Ijl - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% Kledpfx Afovz Hqmo Iol - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 Klodpfx Asvz Hqgef Ijl The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² Ksdpsvz Hhxjfx Af Ioll - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Sąlyga: naudotas, Wir bieten Inject Star HS 5 Vakuum-Tumbler an, die für das professionelle Pökeln, Massieren und Marinieren von Fleisch in Fleisch- und Geflügelverarbeitungsbetrieben sowie bei der Herstellung von Wurstwaren und Fertiggerichten konzipiert sind. Das Arbeitsvolumen von 500 Litern und der Beladungsbereich von 250–350 kg pro Tumbler ermöglichen eine effiziente Verarbeitung mittelgroßer und größerer Chargen von Rohmaterial, mit gleichmäßiger Verteilung von Lake und Gewürzen sowie einer Verbesserung der Struktur und Zartheit des Fleisches. Zum Lieferumfang gehören fünf herausnehmbare Edelstahltrommeln. Die Maschinen arbeiten mit 400 V, 50 Hz, 3N, und die Geschwindigkeit wird mechanisch geregelt – der Bediener kann die Drehzahl einfach an die Produktart und den gewünschten Massiergrad anpassen. Die kompakte Bauweise ermöglicht die Installation des Sets in bestehenden Produktionsräumen ohne größere Änderungen an der Produktionslinie. Technische Daten Inject Star Vakuumtumbler HS 5: Hersteller: Inject Star Modell: HS 5 Typ: Vakuumtumbler Ksdpfsxzr Hijx Af Iell Trommelvolumen: 500 l Chargengewicht (Rohmaterial): 250–350 kg Stromversorgung: 400 V, 50 Hz, 3N Drehzahlregelung: mechanisch Maschinengewicht: ca. 700 kg Ausstattung: fünf herausnehmbare Trommeln Das Inject Star HS 5 Vakuumtumbler-Set ist die ideale Lösung für Betriebe, die die Effizienz beim Massieren und Pökeln von Fleisch steigern, die Qualität der Endprodukte verbessern und die Arbeitsorganisation durch mehrere mobile, einfach zu reinigende Arbeitstrommeln optimieren möchten.

Sąlyga: naudotas, Galima naudoti medžiaga: maisto produktai Galia: 5 kW (7 AG) Tuščias svoris: 725 kg Matmenys (I x P x A): 185 x 102 x 173 cm Kodsx Tcp Uepfx Af Ioll Krovininės erdvės tūris: 750 l

Gamybos metai: 2006, Sąlyga: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: FF102-062, • Gesamtmaße in mm; • Stromversorgung 5,0 kW; Kljdpfsd D I Hqjx Af Ijl • Stromversorgung 400 V; • Druck 3–5 bar; • 102 Einzel-Nadeln, nicht federbelastet, 2 mm; • Bandbreite 400 mm.

Gamybos metai: 2021, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We offer a tabletop gas sterilizer with neutralizer in perfect condition. Klsdpfx Aeukgxxsf Isl Year of manufacture: 2021 Brand: H.W. Andersen Products Limited, Anprolene Model: Anprolene 74i, Abator Anprolene

Sąlyga: labai geros būklės (naudotas), 200m³ Stainless Steel Tanks Quantity: 3 units 180m³ Stainless Steel Tanks Diameter: 4.70 m Height without legs: 14 m Wall thickness: 4.1 mm Bottom thickness: 5.1 mm We offer transport with our special trailer to all regions of Europe! Kljdpfsfngl Nsx Af Iel

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9665, Įranga: šaldiklis, Airproducts Cryo Trim S3 (800) (1992 m./atnaujintas 2018 m.); serijos Nr.: 9665 - užšalusių dalių valymas plastiko granulėmis (didesnėmis nei 2 mm³ – CG 45 granulat arba didesniu) - įrenginio matmenys: aukštis apie 3,4 m, ilgis (atviras arba uždarytas, dėl konvejerio nesikeičia) apie 4,1 m, plotis = konvejerio plotis apie 2,8 m Klsdpfx Afex A Sits Ijl

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2010, Funkcionalumas: ribota funkcionalumas, Mit einem robusten Design und ISC-B20 Touchscreen-Steuerung ausgestattet, mischt unsere CLB-800 Solemischstation bis zu 800 Liter Sole effizient und ist doppelwandig gekühlt. Bediener fügen die Zutaten einfach in den Einfülltrichter, von wo sie durch die Wasserleitung in den Mischtank gefördert werden. Der Tank wird kontinuierlich mit der zur Mischung erforderlichen Wassermenge befüllt. Die fertige Lösung wird permanent im Tank umgewälzt. - Ausführung komplett in Edelstahl - 800 Liter Fassungsvermögen - ISC-B20 Touchscreen-Steuerung mit Speicherung von bis zu 99 Produktprogrammen - Doppelmantel-Kühlung - Hermetisch geschlossene Kühlanlage mit Glykol - Elektronische Temperaturregelung - Einfülltrichter für Zusätze - Ablassventil für einfaches Entleeren oder Fördermöglichkeit zu anderen Anlagen - Schauglas zur Füllstandskontrolle Kjdpfxov Id Tfs Af Isll

Sąlyga: geras (naudotas), Gamybos metai: 2007, Inject Star BI-124-C-P Salzlake-Injektor Konstanz. Bedienkomfort. Zuverlässigkeit. Robuste Qualitätskonstruktion. Das ist es, was Sie beim Einsatz unserer Inject Star automatischen Salzlake-Injektoren entdecken werden, die für die Injektion von Fleisch, Geflügel oder Fisch – mit oder ohne Knochen – konzipiert sind. Ausstattung - Hochgeschwindigkeits- und Niederdruckinjektion - Geeignet für Produkte mit und ohne Knochen - Alle Nadeln sind einzeln gefedert; Injektionsrate ab ca. 0 % aufwärts - Hohe Leistung - Mehrstufiges Lake-Filtersystem zur optimalen Aufbereitungsleistung beim Recycling - Einstellbare Geschwindigkeit - Separate Geschwindigkeitseinstellung für Nadel- und Transportbandantrieb - Hygiene- und Sicherheitsvorrichtungen - Geeignet für alle Fleisch- und Fischarten Hauptdaten: - 31 gefederte Nadelwerkzeuge - Optional mit ISC-B20 Touchscreen-Steuerung - Arbeitsbreite: 400 mm - Durchlasshöhe: 220 mm - Injektionsmenge: bis zu 55 % - Leistung: bis zu 5.500 kg/h - Variable Hubzahl (20–50 Hübe) - Geschwindigkeit des Schubantriebes: 40–60 mm/Hub - 1 Ansaugfilter, 1 Druckfilter, 3 Rückflussfilter - Nadelwerkzeuge mit New Twist System - Leicht zu reinigendes System - Stecknadeln (Schnellwechselsystem) - Flexible Kombinationsmöglichkeiten: von 1 bis 4 Nadeln zur Injektion – auch für Tenderizer-Einsätze mit Messern, maximal 4 werkzeuge insgesamt (Nadeln und Messer kombinierbar) für gleichzeitiges Injizieren und Zartmachen - Optimale Behandlung für jedes Produkt - Einzel- bis Vierfach-Werkzeuge, Bohrungsdurchmesser von 2 mm bis 5,5 mm Technische Daten: - Hersteller: Inject Star - Modell: BI-124-C-P - Baujahr: 2007 - Bandbreite: 400 mm Klsdpfjvzq T Eex Af Iel - Verstellbarer Hub der Nadeln: 20–50 Hübe/min - Max. Produktdurchlasshöhe: 220 mm - Kapazität: 5.500 kg/h - Anzahl Nadeln: 62 (max. 124) - Anschlusswert: 5,4 kW / 50 Hz / 400 V - Maschinenabmessungen (LxBxH): 1.800 x 750 x 2.200 mm - Maschinengewicht: 450 kg

Sąlyga: geras (naudotas), Gamybos metai: 2013, Sorter for Light Loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 Trays, Configuration with 261 Destinations – Used - : Price for sorter incl. control system: ex location: €99,500 (net), incl. dismantling, packaging and loading! Price for the available Transnorm conveyor technology (approx. 170m): €15,000 (net), incl. dismantling, packaging and loading! Kodewxu A Rspfx Af Isll Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Model: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control system: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/h Total length of system: 53 m Total width of system: 14 m Number of induction stations: 1 Width of induction station: 2 m Number of trays: 200 pieces Usable tray size: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 units Product dimensions (L/W/H): Sorter: min: 150 / 120 / 10 mm Max: 600 / 400 / 200 mm Weight: min: 0.25 kg / max.: 5 kg No longer available: roller conveyors, pick-by-light system, flap elements. Per sort station, there were two targets, sorted via tilting chute onto the upper or lower target roller conveyor. Total number of destinations on the sorter: the system had 261 destinations Number of destinations for special purposes (overflow, reject, etc.): 3 units At the destination roller conveyor, there is a pick-by-light system. Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony Detailed description available on request as a PDF (in English)

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, Construction project SRB - Vranje gamina visą granuliavimo įrangą, kurios našumas nuo 500 kg/1 val. iki 6 t/1 val. Gaminame šią įrangą: - Katilai - Džiovyklos - Silo - Maišytuvas su kondicionieriumi - Malūnas - Granulių aušintuvas - Presai - Transportavimo juostos - Maišytuvai - Dulkių šalinimo sistemos Kedpfjxqd T Hjx Af Ioll - Smulkintuvai Visai mūsų įrangai taikoma 1 metų garantija ir teikiama 24 val. techninė pagalba. Teikiame šias paslaugas: - Įrangos montavimas - Diagnostika - Servisas - Linijų priežiūra - Darbuotojų mokymai - Paleidimas Užklausas ir užsakymus galite siųsti el. paštu arba telefonu darbo dienomis nuo 9 iki 17 val.

Sąlyga: naudotas, Tipo: PI 21 Número de agujas: 21 Diámetro de aguja: 4 mm Producto máximo: ancho 250 mm Ciclos por minuto: 15 a 55 ciclos/min. Tipo de mecanismo de avance: cremallera dentada Altura de paso de producto: 220 mm Presión de salmuera: 0,5 a 4,0 bar Potencia eléctrica: 1,5 kW Dimensiones de la máquina en cm: Ancho: 70 Largo: 140 Altura: 176 Klodpfx Ash Dm Spof Ijl Plazo de entrega: 30 días laborables después del pago anticipado

Sąlyga: naudotas, Maschinentyp: Mischer (Tumbler) Kjdjg Nt Egjpfx Af Iell Hersteller: Inject Star Trommelvolumen: 2.600 Liter Einstellbare Gesamtzeit Frequenzgeregelte Drehzahlsteuerung Automatische Entleerung Vakuumbereich: 0–95 % Filtersystem für Vakuumanlage Maschinenabmessungen (LxBxH): 170 x 300 x 190 cm Leistungsaufnahme: 5 kW

Sąlyga: naudotas, Iniettore Inject Star PI 75 Larghezza nastro: 61,5 cm Dimensioni macchina (cm): Larghezza: 100 Kodpfxoh R T Avs Af Ioll Lunghezza: 210 Altezza: 228 Tempi di consegna: 30 giorni lavorativi dopo pagamento anticipato

Sąlyga: naudotas, Injektor mit Lake-Mischsystem Hersteller: Inject Star Modell: BI-124-C-P Ausführung: Edelstahl Nadelanzahl: 124 Leistung: max. 5.500 kg/h Elektrische Leistung: 5,6 kW Spannung: 400V, 50Hz Kedpfx Aovzaaujf Isll Lake-Mischer Modell: CLB-800 Fassungsvermögen: 800 Liter Elektrische Leistung: 5 kW Spannung: 400V, 50Hz Touchscreen-Steuerung Doppel-Kühlung Glaspegelanzeige zur Füllstandsmessung

Sąlyga: naudotas, Injektor Inject Star Typ: PI 36 Anzahl der Nadeln: 36 Nadeldurchmesser: 4 mm Kodpekqyhnsfx Af Isll Durchlaufmechanismus: Zahnstangenführung Elektrische Leistung: 3 kW Maschinenabmessungen (LxBxH): 50x160x200 cm

Sąlyga: naudotas, Tipus de mașină: Malaxor (Tumbler) Producător: Inject Star Capacitate malaxor: 2200 litri Setare timp total de funcționare Kjdpfxsg Nt I Hj Af Ioll Control al vitezei prin convertizor de frecvență Descărcare automată Vid 0-95% Filtru pentru sistemul de vid Dimensiuni utilaj (Lx l x h): 170 x 285 x 190 cm Putere electrică instalată: 4,5 kW