Katilai pirkti naudotą (156)

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, In stock Capacity – 500 l. Self-propelled. Diesel burner. Engine fuel tank – 50 l. Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Godpfx Ajd Swd Ujbmouk Heating of mastic by thermal oil (thermal oil jacket).

Sąlyga: naudotas, bakelio talpa: 5 400 l, GENERAL Equipment: crane lugs Construction type: suspended Remarks: Support ring made of Fe; half-pipe coil not shown in tank drawing Speed: 450 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Total height: 3,700 mm Heating/Cooling: available Power: 3.6 kW Max. overpressure: 6.0 bar Seal type: Mechanical seal with thermosiphon vessel Agitator: propeller Base design: ring Location: Bremen Technical documents: drawing, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,400 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Guedpfx Aexqa Dnsbmek Condition: used Cylindrical height: 1,690 mm Last use: Chemical TANK Max. perm. operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole/dome: in top head (DN 500) Outlet: flange DN100 Note: slight residues MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 V Bottom bearing: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm Agitator arrangement: eccentric in top head Agitator documentation: Comprehensive agitator documentation available Top head wall thickness: 16 mm

Sąlyga: naudotas, bakelio talpa: 568 l, GENERAL INFORMATION Equipment: Control cabinet (not guaranteed) Design: vertical Outer diameter: 900 mm Inner diameter: 810 mm Total height: 1,830 mm Gsdpoxqa Dhefx Abmsuk Heating/Cooling: available Max. allowable operating temperature: 134 °C Max. allowable operating overpressure: 2.0 bar Max. overpressure: 2.0 bar Top cover: removable / hinged top cover Agitator: agitator flange Base type: mobile on castors Location: Bremen Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 568 liters Double jacket volume: 108.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 850 mm Last intended use: pharmaceutical VESSEL Max. allowable operating temperature: 134 °C Number of legs: 4 pcs HEATING/COOLING JACKET Bottom tempering: double jacket FEATURES Note: scratches inside Outlet: 23 mm MATERIAL SPECIFICATIONS Outer surface: polished Inner surface: ground Material of temperature control system: V2A 1.4301 (AISI304) Leg material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in the top cover

Sąlyga: naudotas, bakelio talpa: 5 500 l, GENERAL Equipment: Crane lugs Design: vertical Notes: Dents in the insulation jacket possible; manufacturing and documentation drawings are available from the manufacturer and can be purchased separately there Speed: 429 rpm Outer diameter: 1,890 mm Inner diameter: 1,680 mm Total height: 3,500 mm Heating/Cooling: available Insulation: available Power: 2.2 kW Max. perm. operating temperature: 140 °C Max. perm. operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Agitator: Propeller Installation type: height-adjustable feet Location: Bremen Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,500 liters Double jacket volume: 154.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Last application: brine TANK Max. perm. operating temperature: 140 °C Number of feet: 3 pieces HEATING/COOLING JACKET Max. perm. operating vacuum: 1.0 bar Bottom tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / Dome: in the upper head (DN 400) Remark: minor residues, outlet pipe removed Outlet: 38 mm MATERIAL PROPERTIES Feet material: stainless steel AGITATOR 1 Gusdpfxjxqazaj Abmok Agitator manufacturer: PRG Voltage: 230/400 Volt Agitator position: bottom-mounted

Sąlyga: naudotas, bakelio talpa: 120 l, BENDRAS Guedpfx Ajxqay Njbmsk

Sąlyga: naudotas, bakelio talpa: 313 l, GENERAL INFORMATION Construction type: upright Remarks: Chassis made from V2A stainless steel (the control cabinet boxes visible in the photos are empty); minor dents on the inside of the tanks; top covers made from V2A (suspensions and fastening screws for the top covers are missing) Outer diameter: 730 mm Inner diameter: 620 mm Total height: 1,600 mm Heating/cooling: available Insulation: available Max. allowable operating temperature: 143 °C Max. allowable operating pressure: 3.0 bar Max. overpressure: 3.0 bar Top cover: removable / hinged top cover Agitator: agitator flange Mounting type: mobile frame Location: Bremen Cylinder temperature control: double jacket Nameplate: Volume: 313 litres Double jacket volume: 15.0 litres Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 830 mm Last application: pharmaceutical TANK Guodpfx Aoxqayvobmek Max. allowable operating temperature: 143 °C HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Note: Discharge sockets cut off, metallic discoloration on the inside Discharge outlet: 45 mm MATERIAL SPECIFICATIONS Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Baffle: Agitator positioning: bottom Agitator equipment: One tank still fitted with magnetic stirrer; motor/gear units no longer present

Sąlyga: naudotas, bakelio talpa: 3 690 l, GENERAL Equipment: Crane lugs Design: suspended Notes: Manhole cover incomplete (e.g., sight glass missing, see photos); support ring made of Fe Speed: 6 - 32 rpm Inner diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 4,350 mm Heating/cooling: available Power: 11 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Sealing: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Mounting type: Ring stand Location: Bremen Technical documentation: Drawing, various documents, inspection certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 liters Jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Previous use: Pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in top head (DN 500) Outlet: 130 mm MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt Gedpexqayijfx Abmsuk TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator mounting position: center of top head Agitator equipment: The agitator drive was controlled by an external frequency converter at the previous owner (no longer available); various technical documents for the agitator are available Top head wall thickness: 7.9 mm

Sąlyga: naudotas, bakelio talpa: 2 420 l, GENERAL Equipment: Crane lugs Construction type: Suspended Notes: Manhole DN 350/450 (manhole cover incomplete); Support ring, Fe; Flanges partially Fe Speed: 46 - 230 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be confirmed) Total height: 3,400 mm Heating/Cooling: present Power: 2.2 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: Top cover removable / hinged Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Support form: Ring Location: Bremen Technical documentation: Drawing, various documents, inspection certificate Cylinder jacket temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 litres Double jacket volume: 100.0 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: Used Cylindrical height: 1,180 mm Previous use: Pharmaceutical chemistry Guodpfx Abjxqaycjmok VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: On the top cover Outlet: Present MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt Current disruptor: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator arrangement: Central, on the top cover Agitator equipment: Beam & propeller agitator elements mounted on the shaft; speed was controlled by an external frequency converter (no longer available) by previous operator; various technical documents for the agitator available Top cover wall thickness: 7 mm

Sąlyga: naudotas, bakelio talpa: 3 690 l, GENERAL Design: suspended Remarks: Bearing ring made of Fe; manhole cover incomplete; on one vessel, most of the heating connections have been cut off and are included loose; one vessel is approx. 100 mm lower in total height due to different motor/gearbox units Speed: 42 – 211 rpm Internal diameter: 1,600 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Power: 3 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: beam agitator Support type: ring Location: Bremen Technical documentation: drawing, various documents, inspection certificate Jacketed cylinder: half-pipe coil Name plate: Vacuum: 1.0 bar Volume: 3,690 liters Jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Previous application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: 130 mm Gujdpjxqax Eofx Abmjk MATERIAL SPECIFICATION Material tempering system: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator arrangement: centrally in the top head Agitator features: slight differences in the agitator versions (Interprop beam agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel, an additional stabilizing propeller is installed on the shaft); speed range adjustable via external frequency converter (no longer available) (for one of the two agitators, this range is 25 – 126 rpm; partial technical documentation for agitators available) Top head wall thickness: 7.9 mm

Sąlyga: naudotas, bakelio talpa: 3 586 l, GENERAL Features: Crane lugs Design: Suspended Notes: Sight glasses in the manhole covers are missing; support ring made of Fe; some flanges made of Fe Speed: 30–184 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be checked) Total height: 3,750 mm Heating/cooling: Available Power: 6.8 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand design: Ring Location: Bremen Technical documentation: Drawing, various documents, inspection certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 litres Volume of double jacket: 202.0 litres Cylinder wall thickness: 6 mm Product-contacting material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: Pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: In top section (DN 500) Outlet: 130 mm MATERIAL SPECIFICATION Material of temperature control system: AISI 304 (V2A) 1.4306 AGITATOR 1 Godpfx Abexqaxxjmsuk Agitator manufacturer: Ekato Voltage: 400/690 volts Interference suppressor: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: Centrally mounted on top section Agitator equipment: Technical documentation for agitator available; Interprop beam agitator and inclined blade agitator mounted on shaft; Drive speed can be adjusted by handwheel Top wall thickness: 9.1 mm

Sąlyga: naudotas, bakelio talpa: 3 586 l, GENERAL Equipment: crane lugs Design: suspended Remarks: Further technical documentation available; sight glass in manhole cover missing; support ring made of Fe; some flanges made of Fe Speed: 6 - 40 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with relevant ATEX regulations under local conditions must be verified) Total height: 4,250 mm Heating/Cooling: available Power: 3.5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Shaft seal: mechanical seal with thermosiphon vessel Agitator: anchor stirrer Mounting type: ring Location: Bremen Technical documentation: drawings, acceptance certificate Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 liters Jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,377 mm Last application: pharmaceutical chemistry VESSEL Gsdpsxqaxrofx Abmeuk Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom tempering: half-pipe coil EQUIPMENT Manhole / dome: on top head (DN 500) MATERIAL SPECIFICATION Tempering system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: central on top head Agitator equipment: speed adjustable via handwheel Top wall thickness: 9.1 mm

Sąlyga: naudotas, bakelio talpa: 3 860 l, GENERAL Equipment: crane lugs Design: suspended Remarks: load ring, Fe; manhole cover incomplete (see photos) Speed: 61 rpm External diameter: 2,090 mm Internal diameter: 1,800 mm Explosion protection: motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Insulation: available Power: 4 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: blade agitator Foot type: ring base Location: Bremen Technical documentation: drawings, various documents Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 liters Double jacket volume: 136.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI 316) Condition: used Last application: pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation jacket: riveted Insulation jacket material: aluminum Gedjxqaxljpfx Abmjuk EQUIPMENT Manhole / dome: in the top head (DN 600) Outlet: available Note: dents on insulation jacket, manhole cover plated MATERIAL SPECIFICATION Temperature system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Agitator arrangement: centered in the top head Agitator equipment: gearbox housing slightly damaged in one spot (see photos) Top head wall thickness: 8.14 mm

Sąlyga: naudotas, bakelio talpa: 2 500 l, GENERAL Equipment: Crane lugs Gjdpfx Abexqaw Iomsuk Design: Suspended Remarks: 4 feet made of V2A; mounting bolts for manhole cover incomplete; 1 former connection on the top head was welded shut by the previous operator Internal diameter: 1,390 mm Total height: 3,000 mm Heating/Cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating pressure: 3.0 bar Max. overpressure: 1.0 bar Agitator: Beam agitator Agitator fitting: Agitator flange Support type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Previous application: Chemical industry VESSEL Max. permissible operating temperature: 190 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manhole/Dome: On top head (DN 500) Outlet: Flange DN50 Note: slight adhesions, motor/gearbox missing MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 2 Agitator configuration: Mounted laterally on cylinder AGITATOR 1 Agitator manufacturer: Ekato Baffles: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.6 mm Agitator configuration: Eccentric on top head

Sąlyga: naudotas, bakelio talpa: 5 000 l, GENERAL Equipment: Ball valve Design: suspended Notes: Top plate made of V2A (1.4301); 4 feet made of Fe; slight material pitting inside the tank Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: available Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top plate: removable / hinged top plate Agitator: beam agitator Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,580 mm Last application: chemicals HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / access opening: on top plate (Ø 450) Discharge: DN40 DIN 11851 Note: light residues, motor/gearbox missing MATERIAL SPECIFICATION Gsdpsxqawujfx Abmouk Top plate material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: steel AGITATOR 1 Agitator manufacturer: Fluid TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Agitator position: centered on top plate Top plate wall thickness: 4.5 mm

Sąlyga: naudotas, Gamybos metai: 2007, bakelio talpa: 1 700 l, GENERAL Equipment: Spray head Design: upright Year of manufacture: 2007 External diameter: 1,400 mm Internal diameter: 1,170 mm Total height: 3,250 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 4.0 bar Godpexqauaefx Abmsuk Top cover: removable/top-hinged Agitator: Impeller agitator Agitator drive: Agitator flange Base design: Height-adjustable feet Location: Bremen Technical documentation: Drawings, various documents Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,700 liters Double jacket volume: 230.0 liters Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,170 mm Previous application: Pharmaceutical TANK Max. permissible operating temperature: 100 °C Number of feet: 3 pieces HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: in the top cover (DN 500) MATERIAL SPECIFICATION Outer surface: high gloss Temperature control system material: V2A 1.4301 (AISI 304) Feet material: stainless steel AGITATOR 2 Agitator arrangement: side-mounted on cylinder AGITATOR 1 Agitator arrangement: eccentric in the top cover Agitator equipment: Motor/gear unit no longer present

Sąlyga: naudotas, bakelio talpa: 225 l, BENDRASIAI DUOMENYS Įranga: Kėlimo ąsos Konstrukcija: statmena Pastabos: 4 kojų rėmas iš V2A; rankenos skylės skersmuo apie 155 mm Apsisukimų dažnis: 156–838 aps./min. Išorinis skersmuo: 800 mm Vidinis skersmuo: 590 mm Sprogimų apsauga: variklis su EX-apsauga (atitikimas galiojančioms ATEX direktyvoms vietinėmis sąlygomis turi būti patikrintas) Bendras aukštis: 2 400 mm Šildymas/aušinimas: yra Izoliacija: yra Galia: 0,75 kW Maks. leistina darbinė temperatūra: 95 °C Maks. leistinas darbinis viršslėgis: 4,0 bar Maks. viršslėgis: 1,0 bar Viršutinė dangtis: nuimama / atverčiama RW sandarinimas: slydimo žiedinė tarpinė su termosifoniniu indu Maišyklė: sraigtas Pastatymo tipas: rėmas Vieta: Brėmenas Cilindro temperatūros palaikymas: dviguba sienelė Tipinė plokštelė: Vakuumas: 1,0 bar Tūris: 225 litrų Dvigubos sienelės tūris: 60,0 litrų Produkto kontaktiniai paviršiai: V4A 1.4571 (AISI 316) Būklė: naudotas Paskutinė paskirtis: chemijos pramonė TALPA Maks. leistina darbinė temperatūra: 95 °C ŠILDYMO/AUŠINIMO APVALKALAS Apatinės dalies temperatūros palaikymas: dviguba sienelė IZOLIACIJA Izoliacinis apvalkalas: hermetiškai suvirintas Izoliacinio apvalkalo medžiaga: nerūdijantis plienas ĮRANGA Žmogaus anga / liukas: rankena Pastaba: lengvi likučiai Išleidimo anga: 25 mm MEDŽIAGOS CHARAKTERISTIKOS Temperatūros palaikymo sistemos medžiaga: V2A 1.4301 (AISI 304) MAIŠYKLĖ 1 Maišyklės gamintojas: Stelzer Įtampa: 220/380 V Guedpfx Aboxqatvsmek Elektros trikdžių slopintuvas: Maišyklės padėtis: centre ant viršutinio dangčio Maišyklės įranga: perdavimas reguliuojamas rankiniu rataiukų

Sąlyga: naudotas, bakelio talpa: 1 000 l, GENERAL Equipment: Spray head Design: upright External diameter: 1,300 mm Internal diameter: 1,100 mm Total height: 2,300 mm Heating/cooling: available Insulation: available Power: 1.1 kW Max. allowable operating temperature: 150 °C Max. allowable operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: Magnetic stirrer Support type: Feet Location: Bremen Technical documentation: Drawings, TÜV certificates, various documents Jacket temperature control: Double jacket Nameplate: Godoxqar Sspfx Abmouk Vacuum: 1.0 bar Volume: 1,000 liters Double jacket volume: 72.0 liters Cylinder wall thickness: 10 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,000 mm Previous usage: Pharmaceuticals VESSEL Max. allowable operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation material: Mineral wool Insulation jacket material: Stainless steel EQUIPMENT Manhole / top dome: top (DN 400) Outlet: available Outlet: 50 mm MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Feet material: Stainless steel AGITATOR 1 Agitator manufacturer: Aprotec Voltage: 220/380 volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.6 mm Agitator arrangement: bottom-mounted Agitator equipment: Various technical documents for the agitator available Top wall thickness: 6.3 mm

Sąlyga: naudotas, bakelio talpa: 1 344 l, GENERAL Equipment: Spray head, crane lugs Design: upright Remarks: Tank was modified at the end of 2012 (nozzle welding and foot shortening; TÜV inspection certificate available; the drawing included in the documents is the original drawing; 1 dent in the insulation jacket) Speed: 440 / 940 rpm Outer diameter: 1,350 mm Inner diameter: 1,180 mm Total height: 2,400 mm Heating/Cooling: available Insulation: available Power: 0.33 / 1.85 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Support type: Height-adjustable feet Location: Bremen Technical documents: Drawing, TÜV certificates Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,344 liters Double jacket volume: 76.0 liters Cylinder wall thickness: 8 mm Gujdpfxexqaqhe Abmsk Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 750 mm Last application: Pharmaceuticals TANK Max. permissible operating temperature: 150 °C Number of legs: 3 units HEATING/COOLING JACKET Base temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole/Dome: in upper head (DN 500) Outlet: DN80 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Leg material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 380 Volt TECHNICAL DATA / DIMENSIONS Base plate wall thickness: 6.8 mm Agitator arrangement: eccentric in upper head Upper head wall thickness: 6 mm

Sąlyga: naudotas, bakelio talpa: 1 100 l, GENERAL INFORMATION Equipment: Spray head Design: Vertical Notes: Original drawing available; vessel was modified at the end of 1996 (inspection report available, no modification drawings); one welded bracket inside the vessel Speed: 705 rpm Outer diameter: 1,400 mm Inner diameter: 1,200 mm Total height: 2,450 mm Heating/Cooling: Available Insulation: Available Power: 1.5 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Top head: Removable / hinged top head Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV papers Jacketed cylinder: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,100 liters Double jacket volume: 192.0 liters Cylinder wall thickness: 8 mm Product contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 840 mm Previous application: Pharmaceutical industry VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 HEATING/COOLING JACKET Bottom temperature control: Double jacket INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manway / Dome: In the top head (DN 400) Discharge: DN80 DIN 11851 Guodpjxqaqbjfx Abmok MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Feet material: Stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm Agitator arrangement: Eccentric in top head

Sąlyga: naudotas, Gamybos metai: 2010, bakelio talpa: 1 410 l, GENERAL Equipment: Spray head, crane lugs Design: suspended Year of manufacture: 2010 Remarks: 4 stainless steel feet; total height is estimated; 1 heating inlet cut off; minor metallic discoloration inside the tank; 1 dirt protection collar outside above the feet (diameter approx. 1,740 mm) Speed: 960 rpm External diameter: 1,450 mm Internal diameter: 1,300 mm Total height: 2,250 mm Heating/cooling: available Insulation: available Power: 3 kW Max. allowable operating temperature: 150 °C Max. allowable operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: propeller Stand type: leg supports Location: Bremen Technical documentation: drawing, TÜV certificates, various documents, CE marking, declaration of conformity, operating manual Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,410 liters Double jacket volume: 93.0 liters Cylinder wall thickness: 8.4 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 700 mm Last application: cosmetics CONTAINER Max. allowable operating temperature: 150 °C HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Manhole / dome: on top (DN 500) Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Guedsxqap Djpfx Abmek Voltage: 230/400 Volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.9 mm Agitator arrangement: bottom Top wall thickness: 6.1 mm

Sąlyga: naudotas, Gamybos metai: 2008, bakelio talpa: 2 900 l, GENERAL Equipment: crane lugs Design: suspended Year of manufacture: 2008 Remarks: 4 stainless steel support lugs; total height estimated; 1 heating connection cut off; slight metallic discoloration inside the tank Speed: 960 rpm Outer diameter: 1,800 mm Inner diameter: 1,650 mm Total height: 2,600 mm Heating/cooling: available Insulation: available Power: 4 kW Guodpfx Abjxqapwemek Max. allowable operating temperature: 150 °C Max. allowable operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: propeller Stand type: support lugs Location: Bremen Technical documentation: Drawing, TÜV-certificates, various documents, CE marking and declaration of conformity Jacket heating/cooling (cylinder): half-pipe coil Name plate: Vacuum: 1.0 bar Volume: 2,900 liters Jacket volume: 110.0 liters Cylinder wall thickness: 4.8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 900 mm Last application: cosmetics TANK Max. allowable operating temperature: 150 °C HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom tempering: half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: top (DN 500) Outlet: 65 mm MATERIAL CHARACTERISTICS Heating/cooling system material: V2A 1.4301 (AISI304) AGITATOR 1 Manufacturer agitator: PRG Voltage: 230/400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.5 mm Agitator arrangement: bottom Agitator equipment: technical documentation available for agitator Top wall thickness: 6.7 mm

Sąlyga: naudotas, Gamybos metai: 2008, bakelio talpa: 1 410 l, GENERAL Godoxqapqepfx Abmouk Equipment: Spray head, crane lugs Construction type: suspended Year of manufacture: 2008 Notes: 4 stainless steel mounting feet; total height is estimated; minor metallic discoloration inside the tank Speed: 960 RPM External diameter: 1,450 mm Internal diameter: 1,300 mm Total height: 2,400 mm Heating/Cooling: available Insulation: available Power: 3 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: propeller Support type: mounting feet Location: Bremen Technical documentation: drawing, TÜV documents, various documents, CE marking and declaration of conformity, operating manual Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,410 liters Double jacket volume: 93.0 liters Cylinder wall thickness: 8.4 mm Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 700 mm Last application: cosmetics TANK Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Base temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on top cover (DN 500) Outlet: 65 mm AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 V TECHNICAL DATA / DIMENSIONS Base wall thickness: 6.9 mm Agitator arrangement: bottom Agitator equipment: technical documents for the agitator available Top cover wall thickness: 6.1 mm

Sąlyga: naudotas, Gamybos metai: 2018, bakelio talpa: 500 l, GENERAL Equipment: Spray head, crane lugs Design: suspended Year of manufacture: 2018 Remarks: Comprehensive documentation according to pharmaceutical industry standards included in the scope of delivery; vessel was manufactured for a global pharmaceutical company but was never commissioned there; handhole with sight glass, diameter: 285 mm Speed: 408 rpm Outer diameter: 960 mm Inner diameter: 780 mm Heating/Cooling: available Insulation: available Power: 0.37 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 6.0 bar Top: bolted lid Agitator: magnetic stirrer Stand type: lugs Location: Bremen Technical documents: drawing, TÜV certificates, acceptance certificate, CE marking and declaration of conformity, operating manual Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 500 litres Double jacket volume: 88.0 litres Cylinder wall thickness: 8.9 mm Product-contact material: V4A 1.4539 (AISI316) Condition: unused Cylindrical height: 1,015 mm VESSEL Max. permissible operating temperature: 150 °C Specific gravity of medium: 1.2 t/m³ Bottom head: torispherical head HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Gsdpfx Absxqanmsmsuk INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Manhole / dome: handhole Outlet: available AGITATOR 1 Agitator manufacturer: Zeta GmbH Voltage: 230/400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Agitator arrangement: bottom-mounted Agitator features: magnetic stirrer, presumably speed adjustable via external controller (not included) in the range 75-500 rpm Top wall thickness: 4.3 mm

Sąlyga: naudotas, Gamybos metai: 2007, bakelio talpa: 1 880 l, GENERAL Equipment: Spray head, lifting lugs, control cabinet (no guarantee) Design: vertical Year of manufacture: 2007 Notes: 1 pump (brand: GRUNDFOS) included in scope of delivery; 1 control cabinet (previously used by former operator for 3 of these tanks) can be purchased separately for an additional charge (see photos) Speed: 329 rpm Outer diameter: 1,520 mm Inner diameter: 1,250 mm Godjxqangepfx Abmouk Total height: 2,600 mm Heating/Cooling: available Insulation: available Power: 0.75 kW Max. adm. operating temperature: 150 °C Max. adm. operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: Magnetic stirrer Support type: Height-adjustable legs Location: Bremen Technical documentation: Drawings, various documents, CE marking and declaration of conformity Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,880 liters Double jacket volume: 97.0 liters Cylinder wall thickness: 5 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,140 mm Last application: Pharmaceutical TANK Max. adm. operating temperature: 150 °C Number of legs: 3 pcs HEATING/COOLING JACKET Max. adm. negative operating pressure: 1.0 bar Baseplate temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel FEATURES Manhole / dome: on top (DN 400) Outlet: 48 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Leg material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator arrangement: bottom-mounted

Sąlyga: naudotas, Gamybos metai: 2007, bakelio talpa: 880 l, GENERAL INFORMATION Equipment: Spray head, crane lugs, control cabinet (details without guarantee) Design: vertical Year of manufacture: 2007 Speed: 329 rpm Outer diameter: 1,060 mm Inner diameter: 900 mm Total height: 2,300 mm Heating/cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Top cover: removable / hinged top cover Agitator: magnetic stirrer Stand base: height-adjustable feet Location: Bremen Technical documentation: drawings, various documents, CE marking, and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 880 liters Double jacket volume: 41.0 liters Cylinder wall thickness: 10 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,150 mm Previous use: pharmaceutical industry TANK Max. permissible operating temperature: 150 °C Godpfx Aboxqanaemeuk Number of feet: 3 units HEATING / COOLING JACKET Max. permissible vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL QUALITY Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm Agitator arrangement: bottom