Drebinimo sistema

LDS V875-440 LPT600C

Sąlyga: labai geros būklės (naudotas), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating 6.0 K/min Cooling 11.5 K/min Temperature deviation: Over time: ± 0.8 K Spatial: ± 2.0 K Heat compensation max. 8000 W Data for Climate Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% r.h. Temperature deviation over time: ± 0.3 K Humidity deviation over time: ± 3% r.h. Temperature uniformity: Spatial: ± 1.0 K Heat compensation max. 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions (lowered): Height 2318 mm, Width 1860 mm, Depth 3658 mm Bledpfx Adjw I Rxrsmor External dimensions above shaker: Height 2710 mm External dimensions max. stroke height: 3038 mm Interchangeable floor dimensions: Width 1600 mm, Depth 1504 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side circuit protection: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) We are happy to answer any further questions by phone.

Sąlyga: geras (naudotas), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 (-55 to +140°C) Shaker: Vibration Exciter: 4x LDS V721, air-cooled Amplifier: PA 1000L Controller: imv K2 MIMO (Multi Input Multi Output) Software: imv K2 Excitation Modes: Sine / Random / Shock / Real-Time Profiles Force Vector per Shaker: 2.9 kN (Peak Sine) / 1.9 kN (RMS Random) / 4.6 kN (Peak Shock) Maximum Payload: 100 kg per shaker Acceleration: max. 44 g RMS / 66 g Peak Velocity: max. 0.7 m/s Stroke Amplitude: max. 25.4 mm p-p (1 inch) Frequency Range: 5…4000 Hz Bledpjur Hrbefx Admor Fixture Area for Test Specimens: 1000 x 1000 mm aluminum profile frame Special Features: The four shakers can be operated synchronously or asynchronously with the MIMO controller. With the aluminum profile frame, a fixture area of 1x1 m² is achieved for large test specimens. Without the profile frame, mobile use as a modal shaker for large items such as complete vehicles is possible. The lightweight vibration components of the shakers enable excitation frequencies up to 4000 Hz. Weight: 2000 kg Climatic Chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8.000/-50/120 / Monoblock, welded Dimensions (mm): Width Depth Height Test chamber: 2,000 2,000 2,000 (8 m³) External without base frame: 2,340 3,600 2,800 External with base frame: 2,340 3,600 3,800 Aggregat external: 1,200 2,400 2,200 Door: 2,000 2,000 2 pcs test chamber windows in door: 460 x 460 Weight: 4,500 kg Insulation: 140 mm PU, CFC-free, B1 to DIN 4102 Outer cladding: 0.6 mm steel sheet, painted to RAK 7035 Temperature range: -55 °C to +140 °C Temperature constancy: ± 0.5 K over time Climatic range: +10 °C to +95 °C Humidity range: 10% to 95% RH Refrigerant R404A 29 kg Total weight: 6,500 kg Condition: used Scope of delivery: (see photo) Sample images! Current images to follow! (Changes and errors in technical data and specifications excepted!) For further questions, we will be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Sentek Type: L1024m with PA115 Technical Data: Sine Max (kgf / N): 1,000 / 9,810 Random Force rms (kgf / N): 1,000 / 9,810 Shock Force (6 ms) kgf: 2,000 / 19,620 Usable Frequency Range Hz: 5–3,500 Continuous Displacement pk-pk mm: 51 Shock Displacement pk-pk mm: 51 Max Velocity m/s: 2 Max Acceleration Sine Peak m/s²: 980 Shaker: Shaker Head Diameter mm: 240 Insert Pattern PCD mm plus 1 at centre: 8–100 / 8–200 Thread M10 Resonance Frequency ±5% Hz: 3,050 Max Load Capacity kg: 200 Natural Frequency of Transverse Axis Hz: < 5 Blsdpfx Adsr A Ezzsmer Stray Flux Density Gauss: < 10 Weight kg: 1,150 Dimensions (W x D x H) mm: 884 x 890 x 841 Amplifier Dimensions (W x D x H) mm: 580 x 850 x 1,800 Amplifier Weight Uncrated kg: 290 Cooler Type: VAPE500/P2 Dimensions (W x D x H) mm: 620 x 710 x 1,120 Weight kg: 120 Total Weight approx.: 1,540 Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data and specifications!) If you have further questions, please feel free to contact us by phone.

Sąlyga: naudotas, LDS Type: V875 Shaker System V875-440 with SPA40K Amplifier Vibration Exciter for Medium Forces Technical Data: Head Expander: 850 x 850 mm Armature Size: 440 mm Sine Force Vector: 35.6 kN (peak) Random Force Vector: 35.6 kN (rms) Shock Force Vector: 106.75 kN (peak) Frequency Range: 5 to 3000 Hz Maximum Specimen Mass: 600 kg Maximum Acceleration: 1078.7 m/s² Maximum Velocity: 1.8 m/s Condition: used Weight: Shaker approx. 2200 kg Bjdpfx Aouxcpwedmolr Blower 181 kg Amplifier: 622 kg Scope of delivery: (see pictures) (Subject to changes and errors in the technical data and specifications!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber VTS 7033, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.5 K Spatial temperature deviation: ± 1.5 K Heating rate: 7.5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: width 825 mm x depth 800 mm x height 870 mm Outer housing dimensions: 1080 mm x 1710 mm x 1950 mm Side feedthroughs: 12 cm and 13 cm Voltage: 400V +6/-10%, 3/N, 50Hz Rated power: 9.5 kW; Rated current: 22 A Refrigerants: R404A / R23 Volume: approx. 570 liters; Weight: 580 kg Important safety information for you as the buyer! The following steps are carried out on all chambers we offer in advance: Bedpfxolt U Avj Admjlr 1. Functional check and replacement of necessary components 2. New fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Type: VTS 7033 Condition: used Scope of delivery: (see photo) (Alterations and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), RMS Type: SW 3509 + Amplifier TGD 6000-000.00 and fan Test Manager SWR 900 Power Amplifier: TGD 6000 Vibration Exciter: SW 3709 High-Pressure Fan HVM 80-100 GL 270 RMS Electrodynamic Vibration Test System: Technical Data of the System: Performance Data Max. Vector Force Sinusoidal: 7.5 kN Max. Vector Force Random: 6.75 kN Max. Vector Force Shock: 13.1 kN Frequency Range: 0 - 3000 Hz Mass of Oscillating System (Dynamic): 9 kg Main Resonance (unloaded): 2.5 kHz Max. Amplitude (Sinusoidal): 18 mm (Random, Shock): 26 mm Max. Velocity (Sinusoidal): 1.5 m/s (Random, Shock): 2.5 m/s Max. Acceleration Sinusoidal Oscillating system unloaded: 833 m/s² Additional load 10 kg: 394 m/s² Additional load 30 kg: 192 m/s² Additional load 50 kg: 127 m/s² Max. Acceleration Random Additional load 30 kg: 173 m/s² Max. Acceleration Shock Oscillating system unloaded: 1450 m/s² Additional load 30 kg: 335 m/s² Stray Field Stray field without compensation coil On table surface: 20 mT 120 mm above table surface: 7 mT Stray field with compensation coil On table surface: 10 mT 120 mm above table surface: 2 mT Vibration Isolator Operating range vertical/horizontal Resonance frequency: 2.7 Hz Blsdpfsu Tud Hex Admjr Operating air pressure: 5 bar Pneumatic weight compensation Max. weight compensation: 250 kg Operating air pressure: 2.3 bar Cooling Vibration Exciter: Air Min. cooling air flow: 9 m³/min Max. exhaust air temperature (based on ambient temperature 35°C): 80°C Power Amplifier: Air Heat dissipation to ambient air: 1.5 kW Emission: Sound pressure level 1m distance at height of 1.6m: 105 dBA Electromagnetic field SW 3709 typ. 1.5 mT (50Hz) typ. 0.5 mT (100Hz) Electromagnetic field TGD 3000 typ. 150 HT (50Hz) Dimensions / Weights Table diameter / mounting thread: 224mm / M8 Vibration exciter with integrated isolators: 970 × 695 x 950 mm (W x D x H) Weight: 1200 kg Power amplifier: 550 x 700 x 2075mm (W x D x H) Weight: 270 kg Cooling fan: 839 x 582 x 900mm (W x D x H) Weight: 80 kg Electrical Data: Mains voltage +6/-10% 3 x 400V, 50Hz Connected load: 18 KVA Power consumption (sinusoidal sweep operation): 12 kW Total weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data and specifications!) Further questions can be answered by phone.

Sąlyga: geras (naudotas), Tira Type: TIRAvib S595/RIT-340 TIRA TIRAvib S595/RIT-340 – Electrodynamic Shaker with RIT-340 Isolation Frame For sale is a professional electrodynamic shaker from TIRA GmbH. The TIRAvib S595/RIT-340 model is designed for demanding vibration and shock tests and is operated in conjunction with the power amplifier TIRAvib A 54336. The device complies with ISO 5344 and is ideal for research institutes, universities, and industry applications (automotive, aerospace, electronics testing). Technical data: Performance: Nominal force (SINE): 20,000 N Nominal force (NOISE): 20,000 N Nominal force (SHOCK): 40,000 N Frequency range: DC – 3 kHz Resonant frequency of moving system: > 2.4 kHz Dynamics: Maximum acceleration: SINE: 82 g RANDOM: 82 g SHOCK: 163 g Displacement (peak-to-peak): 50.8 mm Vibration velocity: SINE: 1.8 m/s RANDOM: 1.8 m/s SHOCK: 2.5 m/s Mechanics: Weight of vibration system: 23.9 kg Payload: 410 kg Spring stiffness: 150 N/mm Mounting plate diameter: 340 mm (24x M10 threaded inserts on bolt circles 100/200/300 mm) Guides: 8 spring arms, linear guide (ball bearing) Stiffness: Axial: 15 kN/m Radial: 2,000 kN/m Torsion: 25 kNm/rad Max. specimen weight (vertical): 410 kg Electrical: Nominal current (coil): 200 A D.C. resistance: 0.084 Ohm Field coil: Nominal current: 85 A Nominal voltage: 70 V Bodexbqr Rjpfx Admslr Resistance at 20°C: 0.75 Ohm Magnetic stray field (150 mm above table): without demagnetization coil: < 10 mT with demagnetization coil: < 1 mT Demagnetization coil (optional): 36 V / 4 A Supply: Cooling capacity: 3,300 m³/h air Compressed air: 600 kPa, oil-free and dry Power supply: 3P/N/PE – 400 V – 50 Hz Power consumption: 25 kW Nominal current: 37 A Dimensions & Weight: Width: 947 mm Length: 850 mm Height (vertical): 1,077 mm Total weight (complete frame): 1,610 kg Weight shaker: approx. 900 kg Condition: used Scope of delivery: (See picture) TIRAvib S595/RIT-340 shaker RIT-340 rotary isolation frame (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Sąlyga: geras (naudotas), LDS Model: V824 + Tira Slip Table + SPA30K Vibration Exciter for Medium Forces Technical Specifications: Sinusoidal force vector: 26.689 kN (peak) Bledpfxouzf R As Admjr Random force vector: 25.355 kN (RMS) Half-sine force vector: 53.376 kN Moving element mass: 21.55 kg Frequency range: d.c. - 3200 Hz Max. sinusoidal acceleration: 981 m/s² Max. random acceleration: 50 gn RMS Max. velocity: 1.78 m/s Displacement: ±12.7 mm Slip Table: Dimensions (W x H x D): approx. 1650 mm x 925 mm x 2450 mm Working surface: 991 mm x 991 mm Usable frequency range: 0 to 2000 Hz Plate thickness: 50 mm Plate weight: 94 kg Max. load: 2200 kg Condition: used Weights: Shaker: approx. 1725 kg Slip table: 3500 kg Total weight (as delivered): approx. 5300 kg (In case of technical changes or errors, all data subject to change!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), LDS Shaker Special We are offering an LDS Shaker Special for sale. Shaker Vibration Testing: Shaker - Type V870-640T Testing for vibration and shock resistance during operation and transportation Determination of vibration-related material parameters Application areas: Engine components, exhaust turbochargers, vehicle parts, electronic assemblies Blodpfelzhxlex Admsr Type: V870-640T Condition: used Scope of delivery: (see pictures) (Subject to changes and errors in the technical specifications. All information is without guarantee!) We are happy to answer further questions for you by phone.

Sąlyga: naudotas, IMV Type: i240 + SA3AM Power Amplifier + Fan Dimensions Power Amplifier: SA3AM.i40 W x H x D: 1234 x 997 x 720 mm Vibrator: i240 W x H x D: 580 x 1950 x 850 mm Technical Data of the System: Armature mass: 20 kg Armature diameter: 290 mm Armature resonance: 2300 Hz Permissible eccentric moment: 850 N·m Frequency range: 0-2600 Hz Max. force: 24 kN (sine and random) 48 kN (shock) Max. acceleration: 1200 m/s² (sine) 840 m/s² (random) 2400 m/s² (shock) Max. displacement: 100 mm p-p Max. payload: 400 kg Ambient conditions: Temperature 0-40 °C, humidity 0-85 % RH Max. output power: 30 kVA (SA3AM-i40) + Test Cube Material: Magnesium AZ91 Dimensions: 300 x 300 x 300 mm Shaker armature: 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3AM-i40) Total weight approx. 2800 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors!) Further questions can be answered by phone. Bsdpfx Adjw H N U Domolr