Apdirbimo centrai su traversiniu stalu pirkti naudotą (205)

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: R.0017.01, bendras svoris: 3 800 kg, - prie mašinos pridedama dokumentacija Ppsdpfsx Hf T Aox Ah Hsl

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, BACCI Double Jet CNC Woodworking Machining Center The machine is fully operational and available for testing. Technical specifications: - Working area X: 2400 mm - Working area Y: 250 mm - Working area Z: 100 mm - Independent Z-axes: 2 - Number of routing spindles: 2 - Main motor: 7.5 kW - Maximum spindle speed: 18,000 rpm - 5th axis: 5-axis spindle – yes Ppodpjw Dndrjfx Ah Hel - Machine table: special model - Special material clamping system: for chairs - Loading: automatic magazine - Software: BACCI PITAGORA - CE certificate: ✔️ - Total connected load: 25 kW - Weight: 6,500 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, 4-axis machining centre IMA BIMA 300 Year of manufacture: 2009 Technical condition: very good Pjdpfx Asw R S Dneh Hepl Technical data: - Working table: 4,300 × 1,250 mm - 8 supports (24 suction cups) - Main spindle: 7.5 kW (max. 11 kW), 1,500–18,000 rpm - Tool magazine for 18 tools - IMA 14 drilling unit - Tool set - 2 × vacuum pump, 90 m³/h - Safety mats – alternating operation mode - IMAWOP software on the machine + 1 office licence - Computer emergency power supply - Control cabinet air conditioning unit - Horizontal drilling spindle aggregate - Maximum feed speeds: X 60 m/min, Y 60 m/min, Z 30 m/min - Extraction: according to connection diagram; air speed v = 28 m/s; central outlet ø 250 mm - Weight: approx. 5,500 kg - Compressed air: ¾'' connection, 6 bar pressure; “dry” operation (dryer recommended if installation does not provide dry air) - Electrical installation: main switch in separate control cabinet; operated from a separate control panel; complete control cabinet with monitoring; all CE-compliant safety features; standard cabinet dimensions (height/width/depth) approx. 2000×1200×800 mm; power supply 400/230 V, 50 Hz - Working environment: permissible ambient temperature +15…+35°C (without cabinet air conditioning) - CNC control - Control: ICOS OPEN 321 (Polish language version) - Interpolation: simultaneous linear for 3 axes; 2½D circular for two axes in any of the three planes - Selected IMAWOP functions: operation selection (drilling, milling, grooves); graphic update after corrections; drilling time optimisation; graphical positioning of suction cups; conditional and formula-based programming; technology and tool databases; alphanumeric names/descriptions (up to 28 characters); subprograms; manual entering of processing sequence; malfunction messages; acceleration/braking adjustment (accuracy up to 0.001 mm); automatic referencing; correction from portable panel. Additionally: IMAWOP machining program

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Kompiuteriniu numeriniu valdymu (CNC) valdomas apdirbimo centras Darbo laukas X: 4375 mm Darbo laukas Y: 1550 mm Darbo laukas Z: 250 mm 5 ašių elektrosuklys, HSK-F63, galia apie 10 kW, skystinis aušinimas CNC valdiklis: HOMAG PowerControl Vakuuminiai siurbliai Pjdpox R Ergsfx Ah Hepl

Sąlyga: naudotas, Gamybos metai: 2007, Naudota mašina Pagaminimo metai: 2007 Įranga ir techniniai duomenys: Nesting įrenginys su rastriniu stalu Apdirbimo matmenys: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Eigos matmenys: - X: 5665 mm - Y: 1650 mm - Z: 325 mm su frezavimo agregatu 7933: - Variklis 11 kW (S6) - HSK 63 Psdpfxswka Ips Ah Hjpl - vandens aušinimas su C ašimi su 18-ių padėčių diskiniu įrankių keitikliu su 250 m³ vakuuminiu siurbliu su rankiniu valdymo pultu su centriniu tepimu su minimalaus kiekio tepimo sistema Prieinamumas: iškart Vieta: Röllbach

Sąlyga: labai geros būklės (naudotas), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry construction with safety foot mats. PC control type ICOS OPEN CNC – IMAWOP software. Work tables with console design (No. 8 console tables x 1400 mm). Console table with LED/diode light strip. Automatic tool changer system (magazine slots – No. 18 slots). Usable working area (X-Y-Z): 4000 x 2100 x 300 mm. Usable working area (X-Y-Z) for edge banding: 4000 x 1800 x 60 mm. No. 2 working zones. Vacuum pump / capacity (m³/h): 140. Chip conveyor. With separate electrical and control cabinet. Total connected load (kW): 32. Machining units (upper): No. 21 independent vertical drilling spindles (4 x 1.2 kW). No. 1 main vertical spindle (milling unit) HSK 63 ROBOT (16 kW). Edge banding unit, glue applicator (hot melt glue) VT 100. Edgebanding material (rolls) thickness (min/max): 0.4 / 3 mm. Roll edge magazine (No. 2 compartments). OPTIONS: Saw unit, max diameter 200 mm. Psdjhu U Nxjpfx Ah Hopl Combination unit (flush milling/profiling scraper). Drilling head (with No. 4 horizontal drilling spindles).

Sąlyga: labai geros būklės (naudotas), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axis (ROBOT Head) Gantry construction design Control: ICOS CNC – Software: IMAWOP / (OPTION: IMAwinCAD) Safety enclosure for machining head Clamping table with 8 consoles LED positioning system along X-axis for console positioning and Y-axis for vacuum clamp positioning Automatic tool change system 2 rotary tool changers – Magazine/tool positions: 8 + TC8 (total 18 positions) Maximum working area (X – Y – Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity m³/h): 140 Separate electrical and control panel. Total connected load (kW): 23 WORKING UNITS (TOP): Ppodpfx Aefin Saeh Hel 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (drilling head motor power: 1.2 kW x 4) 1 grooving saw unit, 125 mm diameter, swivels 90° in X-Y direction 1 vertical main spindle (milling unit) – robot head (HSK F63) Power of vertical main spindle: 9 kW Independent Z-axis travel: 650 mm Axis A mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°.

Sąlyga: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edge banding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) – mm 1200 LED setup assistance for vacuum suction cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity 140 m³/h) Safety enclosure for the working head, safety tread mats Chip conveyor No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit – gluing unit (hot-melt adhesive) VT 50 Edge magazine for rolls (6 compartments) OPTIONS: No. 1 saw adapter unit, 90 degrees fixed, max. diameter 200 mm No. 1 adapter unit for flush trimming and profile scraper No. 1 horizontal drilling and milling head adapter unit (cross head) with 4 horizontal spindles Ppedpefbmqtjfx Ah Hel

Sąlyga: labai geros būklės (naudotas), CNC MACHINING CENTRE (POINT-TO-POINT) - 4 Axes Gantry-type construction Control unit: Power Control PC85 – Software: woodWOP Safety enclosure for the working head Clamping table with no. 10 consoles (1500 mm) Podpfxer Ai Sqj Ah Hepl LASER system on X-axis for positioning the consoles and on the Y-axis for vacuum clamps Automatic tool changing system No. 2 rotary tool changers – magazine/tool positions: W8 (no. 8) + (no. 3) Maximum working area (X – Y – Z): 6000 mm x max. 1600 mm x 125 mm No. 4 working zones – 2 x vacuum pumps (capacity in m³/h) With separate electrical and control cabinet Total connected load (kW): 27.5 (approx.) WORKING UNITS (TOP): No. 21 independent vertical drilling spindles (High Speed 7500) No. 10 independent horizontal drilling spindles (6 in X-axis + 4 in Y-axis) Drilling head motor power (kW): 2.3 No. 1 vertical main spindle (milling unit) HSK 63: 9 kW No. 1 grooving saw unit, diameter 125 mm, N1 – swiveling 90° in X–Y direction

Sąlyga: labai geros būklės (naudotas), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axes (DRIVE 5C+) Portal-type machine (movable in X-axis) Control unit (PC85), woodWOP software Work head safety enclosure Clamping table with consoles, model K-Table Console support arms (qty): 10; clamping table dimensions (mm): 1250 Pneumatic kit powerClamp – clamping elements – K Table Psdpfsnzhwhox Ah Hspl Workpiece collet; automatic tool changing system Disc tool changer – magazine slots (tool positions): 14 Maximum working area (X – Y – Z): 6175 mm x max. 1550 mm x 300 mm No. 2 work zones – vacuum pump (capacity in m³/h): 2 x 100 Chip conveyor With separate electrical and control cabinet. Total connected load (kW): (50 A) WORKING UNITS (TOP): No. 9 independent vertical drilling spindles (high speed 7500) No. 4 independent horizontal drilling spindles (2 along X-axis + 2 along Y-axis) (1.5 kW) No. 1 main vertical spindle (milling unit) HSKF63 DRIVE 5C+ (10 kW)

Sąlyga: labai geros būklės (naudotas), 4-axis CNC-controlled MACHINING CENTER Gantry-style construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with beam supports. Number of supports: 6 (1400 mm) Automatic positioning of the supports (X-axis) Automatic positioning of vacuum suction cups (Y-axis) Automatic tool change system Disc-type tool changer – magazine capacity: 18 tool positions Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X-Y-Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X-Y-Z): 4250 x 2200 x 60 mm Chip conveyor Supplied with separate electrical and control cabinet Total connected load (kW): 28 WORKING UNITS (TOP): Pjdpfx Ahovxhnuo Hspl Vertical main spindle (milling unit) HSK F63 – Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for securing and moving panels to the machine’s vacuum pods 5 air tables for staging panels before processing Programmable vacuum system for lifting panels onto the conveyor belt Panel exit system with motorized conveyor belts

Sąlyga: labai geros būklės (naudotas), CNC MACHINING CENTER (POINT-TO-POINT) – 4 axes (5 axes with FLEX 5) Gantry-type machine (X-axis moving) Control: Powertouch control (PC85), woodWOP software Safety enclosure for working head Clamping table with K-Table model consoles Console support arms (qty.): 8, Clamping table dimensions (mm): 1340 Automatic positioning of consoles (X-axis) LEDs indicate programmed vacuum cup positions (Y-axis) Workpiece clamping chuck, automatic tool change system – POWERCLAMP Carousel tool changer – magazine positions (number of tool places): 18 Maximum working range (X – Y – Z): 4000 mm x 1550 mm x 60 mm Maximum working range (X – Y – Z) for edgebanding: 4000 mm x 1500 mm x 60 mm Working area – vacuum pump (capacity in m³/h): 100/140 Chip conveyor With separate electrical and control cabinet Total connected load (52 A) Psdpfsw Dc Nisx Ah Hjpl WORKING UNITS (TOP): No. 17 independent vertical drilling spindles (High Speed 7500) No. 4 independent horizontal drilling spindles (2 on X axis + 2 on Y axis) Drilling head motor power (kW): 2.2 No. 1 vertical main spindle (milling unit) HSK 63 (kW: 15) Edgebanding unit Power Edge (Y-axis), edgebanding aggregate (hot-melt glue + pre-melter) Roll material (edge) thickness (min/max) mm: 0.4 – 3 Edge magazine for rolls (compartment no. 1) Pre-cutting station (cutting aggregate) No. 1 crossbeam aggregate (4 horizontal drilling spindles) No. 1 circular saw unit (diam. mm 125) Combi aggregate (flush milling–profile scraper)

Sąlyga: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Setup table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X axis) Automatic positioning of the vacuum pods (Y axis) Automatic tool changer – 18 tool positions Max. working area (X - Y - Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Including separate electrical cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): 1 vertical main spindle (milling unit) HSK F63 – drive power 18 kW (S6) Saw 90°, fixed, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-position roll magazine Combined aggregate (flush milling/profile scraper) Feed system with brush table Pjdjtixpuepfx Ah Hspl 6 clamps for fixing and moving the panel on the machine’s vacuum pods Workpiece outfeed with motorized rollers + right-angle transfer system

Sąlyga: labai geros būklės (naudotas), 4-Axis CNC MACHINING CENTER for milling, drilling, cutting, and edge banding. C-Arm machine – safety tread mats at the front CNC control type PowerControl PC 85 (WoodWop software) 10 supports/consoles (1340 mm) LEDs indicate the programmed positions of vacuum clamps (Y-axis) Automatic tool changer system (carousel type with 18 positions) Usable working area (X - Y - Z) mm 6175 x 1550 x 60 Ppsdpeh Ucn Rofx Ah Hol Usable working area for edge banding (X - Y - Z) mm 6000 x 1475 x 60 No. 2 work areas – No. 2 vacuum pumps (capacity 100 m3/h) Chip conveyor for evacuating waste from the machining process Total connected load 27 kW Processing units (Top) No. 17 independent vertical drilling spindles (2.2 kW) No. 4 independent horizontal drilling spindles No. 1 vertical electrospindle HSK F63 (main spindle 11 kW) No. 1 grooving saw unit 0°-90°, diameter (mm) 125 Edge banding unit Power Edge (Y-axis), edge banding aggregate (hot melt glue + pre-melter) Roll material (edging) thickness (min/max) mm 0.4 - 3 Edge magazine for rolls (2 positions)

Sąlyga: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP Software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety foot mats Psdpfoq Nmutex Ah Hepl No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool change system (carousel changer), 18 tool positions No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross unit with 4 horizontal drilling spindles + grooving saw (max. diameter mm 125) Edgebanding unit - hot melt glue applicator VT 100 No. 2 edge magazine for roll material OPTIONS: No. 1 adapter unit "FLEX 5" model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Sąlyga: labai geros būklės (naudotas), 5-Axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding ICOS CNC control unit (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel path mm 650) Maximum working area (X - Y - Z) during edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – mm 1400 LED positioning guides for vacuum suction cups (positioning along the Y-axis) No. 2 vacuum pumps (capacity 140 m³/h) Safety cabin for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type), No. 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter (mm) 200 Edge banding unit (PUR glue + Pre-melter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE BANDING UNIT No. 2 edge magazine for rolls OPTIONS: Ppedpfx Ahew A Ruqo Hel No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, programmable lowering, integrated in each support 8 workpiece stops, mounted 670 mm from the rear in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, programmable lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into machine table Vacuum pump 90 m³/h Processing head configuration: Mounted on Z2 axis Drilling unit BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in X direction Grooving saw, diameter 120 mm fixed in X direction Grooving saw, diameter 120 mm fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Right/left rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the gluing process Podoxraimspfx Ah Hopl 16-slot tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with 360-degree endless rotation Glue application for hot-melt adhesives Double pressure roller, exchangeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at 8 degrees angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results with wood edges with primer of 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm for edges less than 1 mm thickness Min. internal radius 30 mm with edge thickness 2 mm Min. panel size for edge banding 300 x 300 mm Min. size for banding inner cutouts 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine; this configuration restricts pendulum operation. Roll diameter (edge material): 800 mm Safety equipment: * Safety mats in front of the machine * Right-side safety guard with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/trimming and radius milling unit - Combination profile/flat scraping unit - Sawing unit

Sąlyga: naudotas, Gamybos metai: 1996, Funkcionalumas: ribota funkcionalumas, MAKA HC 57 R (Robot) CNC apdirbimo centras, 5 ašių Tipas HC-57 R / Mašinos Nr. 420 747 / Pagaminimo metai 1995 / Elektros schemos Nr. 320 177 Mašina yra veikianti, ypač tvirta konstrukcija (frezavimo velenas, įrankių keitiklis, vakuuminis siurblys, atrama ir kt.) ir aprūpinta esama elektronika (valdymo sistema, kištukiniai moduliai, konverteris). Matomas normalus amžiaus nusidėvėjimas kabelių, oro linijų, centrinės tepimo sistemos vamzdžių ir pan. srityse... Mašina veikia ir yra paruošta naudojimui, tačiau dėl minėto nusidėvėjimo parduodama atsarginėms dalims arba remontui. Pjdpjx E Dp Tofx Ah Hepl Atsiėmimas iš 41334 Nettetal, tiesiai iš dirbtuvės. Kaina - derinama. Jei nepavyks rasti pirkėjo surinktai, pilnai mašinai, apdirbimo centras bus išardytas. Atsarginės dalys bus vėliau siūlomos atskirai. Susidomėję MAKA atsarginėmis dalimis gali iš anksto kreiptis dėl detalių ar užklausos.

Sąlyga: naujas, Gamybos metai: 2026, Gręžimo ir kaiščių įkalimo staklės vienalaikiam gręžimui, klijavimui ir kaiščių įkalimui 32 mm sistemai su daugiašpindliniu gręžimo galvutėmis ir reguliuojamomis kaiščių stotelėmis. Trumpas pristatymas: • Universalios gręžimo ir kaiščių įkalimo staklės • Itin paprastas valdymas • Uždara klijų sistema • Tinka plokščių ir masyvo apdirbimui • Papildomas pasirinktinai vertikalus gręžimo agregatas • Atpalaiduoja CNC apdirbimo centrus • Puikus papildymas nesting staklėms Pjdpfsdx Aw Nsx Ah Hspl

Sąlyga: naudotas, Gamybos metai: 2005, Naudota mašina Pagaminimo metai: 2005 Podpfx Ahjwka H Ee Hopl Įranga ir techniniai duomenys: Judėjimo ašys: - X ašis: 2.685 mm - Y ašis: 1.095 mm - Z ašis: 140 mm Frezavimo agregatas: - 6 kW, vandens aušinimas - Įrankio laikiklis HSK 63 F - Apsisukimai 1.000 - 18.000 aps./min. Įrankių keitiklis: 6 pozicijos, šonas Gręžimo galva: - 9 vertikalios gręžimo spindelės su 32 mm atstumu - Horizontalios gręžimo spindelės: 1+1 - Vertikalios gręžimo spindelės: 1+1 Įpjovimo pjūklas X kryptimi Valdymas: Twin CAM 32 Vakuuminis siurblys 100 m³/val. Įskaitant vakuuminius siurbtukus Matmenys: 5200 x 2843 x 1855 mm Svoris: apie 3.500 kg Prieinamumas: pagal susitarimą Sandėliavimo vieta: Röllbach

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 600 mm, Y ašies eiga: 1 535 mm, Z ašies eigos atstumas: 250 mm, Vertikalūs elektros velenai: 2 Pagrindinis variklis: 12 kW 4 ašis: C ašis Įrankių sistema: HSK-F63 Įrankių keitiklis: 22 Vertikalios gręžimo galvos: 29 Horizontalios gręžimo galvos X: 8 Horizontalios gręžimo galvos Y: 4 Pjūklo diskas griovelių pjovimui X kryptimi Strypų kiekis: 8 1 vakuuminė pompa, 250 m³/h Saugos kilimėlis Valdymo blokas: BIESSE XP 600 Programinė įranga: DIREKT CNC NC-HOPS 5.6 Įskaičiuoti 4 agregatai (durų išėmos ir pan.): - Gręžimo, frezavimo ir pjovimo agregatas su 4 velenais - Pjovimo ir frezavimo agregatas Ppedox Ir Eujpfx Ah Hjl - Spynos dėžutės agregatas abiems pusėms - Spynos dėžutės agregatas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Holz-Her eco-master 7120 apdirbimo centras Ppedpfxjya Nb Nj Ah Hsl Pagaminimo metai: 2003 Techninė būklė: labai gera Techniniai duomenys: - 1 frezavimo galva - gręžimo blokas - 3 ašys - matmenys: 2535 x 1283 x 130 mm - 90° pjūklas - 6 skersiniai

Sąlyga: labai geros būklės (naudotas), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center with robust technology, ideal for industrial-scale furniture manufacturing and interior fit-out applications. ⸻ Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C axis) • Travel paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control system: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal processing • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: grid or console table • Optional: edge banding and labeling ⸻ Special Features • High dimensional accuracy and repeat precision • Sturdy construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior joinery ⸻ The machine is available immediately. Disassembly and transport can be arranged by our service team upon request. Ppsdpfoxk Tumjx Ah Hsl ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus VAT, subject to change and errors excepted.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008205, Darbinio eigos „X“ ašyje sritis: 4250 mm Darbinio eigos „Y“ ašyje sritis: 1320 mm Darbinis stalas: su vakuuminiais konsoliniais atramomis Pagrindinio veleno galia: 11 kW Ppedpfx Ahex A Th Re Hsl Valdomų ašių skaičius: 4 ašys Gręžimo velenų skaičius: 31 Įrankių vietų skaičius: 22

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007813, Darbinis plotas X ašyje: 3390 mm Darbinis plotas Y ašyje: 1552 mm Darbinis lygis: Su vakuuminėmis konsolėmis Pagrindinio veleno galia: 12 kW Valdomų ašių skaičius: 4 ašys Gręžimo velenų skaičius: 34 Pedpfjx A Thdsx Ah Hspl Įrankių vietų skaičius: 12