Apdirbimo centras su briaunų apvadu

Biesse Rover A Edge 1632

Numerical control BH 660 with BIESSE BSolid software
bEdge module for edge management
bSolid surface design
Sophia – IoT connectivity
Office monitoring
Working area in X-axis: 3228 mm
Working area in Y-axis: 1580 mm
Working area in Z-axis: 200 mm with suction cups H74 mm
Working area in Z-axis: 245 mm with suction cups H29 mm
No. 8 adjustable ATS panel support rails
Pneumatic clamping system installed, divided into two Y-zones
No. 6 pneumatic bakelite bars for panel lifting
No. 3 adjustable suction cups for support bar
Set-up assistant for suction cups
No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK cone connection, 20,000 rpm
Automatic tool changer with 16 positions on the X-axis of the carriage
Independent Tesa boring heads BH17 arranged as follows:
No. 5 independent spindles for vertical drilling in the “X” direction
No. 5 independent spindles for vertical drilling in the “Y” direction
No. 4 spindles for horizontal drilling in the “X” direction
No. 2 spindles for horizontal drilling in the “Y” direction
No. 1 saw blade integrated in the drilling head, diameter 120 mm (usable cut 25 mm)
GU60L gluing unit for EVA glue with premelter – edge pressure system with double rubberized roller for spokes
Maximum internal diameter 30 mm and sensor for edge jointing - 500 ml glue pot mounted on glue roller - edge warming lamp
Edge pre-feed system - edge cutting system - option for manual edge feeding
Plastic edge thickness from 0.4 to 3 mm
Wood edge thickness from 0.4 to 2 mm
Laminate edge thickness from 0.4 to 1.2 mm
Maximum edge width 65 mm
Workpiece thickness from 10 to 60 mm
Minimum machinable internal radius with edge processing: 30 mm
Maximum external radius for edging, proportional to edge thickness and stiffness:
* 10 mm with edge up to 1 mm thick
* 20 mm with 2 mm thick edge
* 30 mm with 3 mm thick edge
Minimum dimensions of edgebanded panel: 300 x 300 mm
Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm
Edge magazine with 2 positions inside the safety enclosure for edges up to 65 mm thick
Finished panel cleaning station with automated distribution of special cleaning liquids and a cleaning cycle
No. 1 unit for edge rounding/chamfering
No. 1 EF60A combination unit trimmer/scraper
Perimeter safety fence
Chip extraction system with motorized conveyor
Liquid cooling system
Automatic lubrication system
Rcedpfx Aougpwnolcoh
No. 1 vacuum pump with 250 m³/h
TECHNICAL DATA TO BE CONFIRMED

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.